Mastering Audio Balance: Achieving Consistent Volume Levels with VLC Media Player

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

“Streamlining Silence: Simplified Guide to Extracting Background Noise From Music Tracks Using Audacity”

Removing vocals from audio tracks or songs can be tricky. You may want to create a video and need an instrumental track to add to the background. Maybe you are a content creator looking to remove vocals from a song and extract the instrumental parts for background music in various projects. The Audacity vocal remover makes it easy to achieve this. The vocal remover in Audacity is a great tool that brings satisfactory results without losing the quality of the original track. In this article, we explain two methods of vocal reduction and isolation Audacity and the steps you can follow to do the same in Filmora.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Method 1: Remove Vocals Using Audacity Vocal Reduction Tool

The first method of removing vocals in Audacity is using the built-in vocal remover. This method is effective in completely removing vocals depending on how much processing is on the vocal. Even if the vocals are not completely removed, the method will reduce the volume significantly to give you great results. Let’s have a look at how to isolate vocal audacity with this method.

Step 1: Open Audacity

The first thing you need to do is open the Audacity software in preparation for the vocal removal.

Step 2: Import the Audio Track

Go to File > Import > Audio to import the audio track you want to edit.

Step 3: Select Audio Track

Select the song or audio track from which you want to remove the vocals. This allows Audacity to load the waveform of the track into the editor.

Step 4: Export as MP3

Backup the file so that you still have the whole song available for use later. Go to File > Export > Export as MP3. Audacity will export the track in the original file format. If it was a WAV audio file, the export will be to that type. This ensures that the audio artifacts are kept in the best condition for editing. Be sure to name the exported file in something you will easily remember.

Step 5: Import the New Audio File

Once you have exported the audio file, click “Close “on the original file. Then import the file you exported in the last step.

Step 6: Apply Vocal Reduction and Isolation

Click on Select, then Select All. On the Effect drop-down menu, select Audacity Vocal Reduction and Isolation.

Step 7: Remove Vocals

Click on the Action tab and select Remove Vocals. Wait for Audacity to remove the vocal and click Play to listen to the edited track. Audacity isolate vocals giving you clear instruments for your audio track or song file.

This method is a quick and easy way to remove vocals from any song in Audacity. It works best with any kind of song and will produce the edited track in just a matter of minutes. On the drawback, this method does not always wholly remove vocal and you may at times still hear bits of it. It may also remove other elements of the audio in addition to the vocal. Nonetheless, it is an effective approach that will work most of the time.

Method 2: Remove Vocals Using Audacity Splitting Audio Channels

When working with songs or audio tracks with vocals in one channel and instruments in another, this is the best method to use. The Audacity vocal remover plugin gives you a simple way to separate the vocals and other sounds in an audio file. However, you cannot tell song that has multiple channels simply by looking at or listening to it. Therefore, you can try this method with any of your files and see the quality of the outcome. Here are the steps for this audacity separate vocals method:

Step 1: Import Your File

Start by importing your audio track or song file into Audacity.

Step 2: Split Stereo to Mono

In the title of the audio, click the Down Arrow. Then select Split Stereo to Mono.

Step 3: Play Solo

Click on the Play button and choose Solo on each track. This allows you to see if there is any isolated vocal on either channel.

Step 4: Delete Isolated Vocal

From the results, delete the section that contains the isolated vocal from the Audacity session.

This alternative method is also effective in extract vocals Audacity. The main benefit is it has fewer steps than the first method. It will also completely remove vocals that are on their own channel. However, the method is limited in that it does not work for the vast majority of audio. It will only work for audio tracks with vols on one channel and instruments on another.

Alternative Way to Remove Vocals from Audio with Filmora

Another great option for removing vocals from a song is using Wondershare Filmora. The video editing software comes with some interesting features, including vocal removal. The recently released Filmora Version 13 is more versatile and user-friendly for better edits. With the integration of AI, users can automate vocal removal which would normally require a lot of time and incredible skill to execute. The AI in the software does this in a few minutes. Filmora also has some amazing features that automate video editing, allowing you to do more with less effort.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Quick Tutorial on Removing Vocals with Filmora

The AI Vocal Remover feature on Filmora separates vocals and music from any song or audio track. You can use this feature to extract any acapella from music tracks or dub videos freely by removing the vocals completely. The feature allows you to keep high-quality audio while removing the vocals. It uses advanced algorithms to isolate vocals while maintaining exceptional audio quality. This ensures that vocals are effectively separated from the background music, by audio fidelity is not lost. To remove vocals from your video or audio files, follow these simple steps:

Method 1: Filmora Top Toolbar

Step 1 – Launch Filmors and Create a New Projects

Click on the Filmora icon on your desktop to launch the software. Log in to sign up using the Profile icon at the top. Navigate to the control panel on the left side, and then choose the Create Project Option, and click New Project.

Step 2: Import Source Files and Add to Timeline

On the Main Filmora Interface, select Media from the custom toolbar. Then click Files and import the files you want to use to Filmora. Select the imported files, and drag and drop them into the timeline panel.

Step 3 – Enable AI Vocal Removal

Select the audio track or music clip you want to use in the timeline. Navigate toward the Tools tab at the top toolbar. Choose the Audio option from the drop-down menu and click on the AI Vocal Remover.

Method 2: Running AI Vocal Remover from the Timeline

Once you upload media Filmora, select the media that you want to remove vocal from. Then drag and drop it to the timeline panel. Right-click on the video and choose the AI Vocal Remover from the options panel. This will automatically remove vocals from the video.

Compared to Audacity, Filmora’s AI Vocal Remover tool is quick and easy to use. It will facilitate your video editing process by allowing you to remove vocals and use instrumentals on the go. For instance, this feature allows you to easily dub any video without having to cover up the current vocals. This means that your videos will be more entertaining and engaging while keeping great soundtracks. Match the energy in your videos with the quality of the instrumentals with just a few clicks.

Conclusion

Removing vocals from a video song or audio file gives you more freedom in your projects. You can use the audio as an instrumental or in other creative ways. Audacity is among the most popular vocal removers on the internet. It offers several ways to remove vocals clearly from your audio tracks or music files. Vocal isolation audacity is easy and takes only a few steps. However, we recommend the AI vocal remover feature by Filmora because it is more versatile and accurate. The automated feature takes care of everything for you when removing the vocals from your audio files. You also get to utilize other useful video editing features that automate mundane tasks.

Free Download Free Download Learn More

Method 1: Remove Vocals Using Audacity Vocal Reduction Tool

The first method of removing vocals in Audacity is using the built-in vocal remover. This method is effective in completely removing vocals depending on how much processing is on the vocal. Even if the vocals are not completely removed, the method will reduce the volume significantly to give you great results. Let’s have a look at how to isolate vocal audacity with this method.

Step 1: Open Audacity

The first thing you need to do is open the Audacity software in preparation for the vocal removal.

Step 2: Import the Audio Track

Go to File > Import > Audio to import the audio track you want to edit.

Step 3: Select Audio Track

Select the song or audio track from which you want to remove the vocals. This allows Audacity to load the waveform of the track into the editor.

Step 4: Export as MP3

Backup the file so that you still have the whole song available for use later. Go to File > Export > Export as MP3. Audacity will export the track in the original file format. If it was a WAV audio file, the export will be to that type. This ensures that the audio artifacts are kept in the best condition for editing. Be sure to name the exported file in something you will easily remember.

Step 5: Import the New Audio File

Once you have exported the audio file, click “Close “on the original file. Then import the file you exported in the last step.

Step 6: Apply Vocal Reduction and Isolation

Click on Select, then Select All. On the Effect drop-down menu, select Audacity Vocal Reduction and Isolation.

Step 7: Remove Vocals

Click on the Action tab and select Remove Vocals. Wait for Audacity to remove the vocal and click Play to listen to the edited track. Audacity isolate vocals giving you clear instruments for your audio track or song file.

This method is a quick and easy way to remove vocals from any song in Audacity. It works best with any kind of song and will produce the edited track in just a matter of minutes. On the drawback, this method does not always wholly remove vocal and you may at times still hear bits of it. It may also remove other elements of the audio in addition to the vocal. Nonetheless, it is an effective approach that will work most of the time.

Method 2: Remove Vocals Using Audacity Splitting Audio Channels

When working with songs or audio tracks with vocals in one channel and instruments in another, this is the best method to use. The Audacity vocal remover plugin gives you a simple way to separate the vocals and other sounds in an audio file. However, you cannot tell song that has multiple channels simply by looking at or listening to it. Therefore, you can try this method with any of your files and see the quality of the outcome. Here are the steps for this audacity separate vocals method:

Step 1: Import Your File

Start by importing your audio track or song file into Audacity.

Step 2: Split Stereo to Mono

In the title of the audio, click the Down Arrow. Then select Split Stereo to Mono.

Step 3: Play Solo

Click on the Play button and choose Solo on each track. This allows you to see if there is any isolated vocal on either channel.

Step 4: Delete Isolated Vocal

From the results, delete the section that contains the isolated vocal from the Audacity session.

Click here

This alternative method is also effective in extract vocals Audacity. The main benefit is it has fewer steps than the first method. It will also completely remove vocals that are on their own channel. However, the method is limited in that it does not work for the vast majority of audio. It will only work for audio tracks with vols on one channel and instruments on another.

Alternative Way to Remove Vocals from Audio with Filmora

Another great option for removing vocals from a song is using Wondershare Filmora. The video editing software comes with some interesting features, including vocal removal. The recently released Filmora Version 13 is more versatile and user-friendly for better edits. With the integration of AI, users can automate vocal removal which would normally require a lot of time and incredible skill to execute. The AI in the software does this in a few minutes. Filmora also has some amazing features that automate video editing, allowing you to do more with less effort.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Quick Tutorial on Removing Vocals with Filmora

The AI Vocal Remover feature on Filmora separates vocals and music from any song or audio track. You can use this feature to extract any acapella from music tracks or dub videos freely by removing the vocals completely. The feature allows you to keep high-quality audio while removing the vocals. It uses advanced algorithms to isolate vocals while maintaining exceptional audio quality. This ensures that vocals are effectively separated from the background music, by audio fidelity is not lost. To remove vocals from your video or audio files, follow these simple steps:

Method 1: Filmora Top Toolbar

Step 1 – Launch Filmors and Create a New Projects

Click on the Filmora icon on your desktop to launch the software. Log in to sign up using the Profile icon at the top. Navigate to the control panel on the left side, and then choose the Create Project Option, and click New Project.

Step 2: Import Source Files and Add to Timeline

On the Main Filmora Interface, select Media from the custom toolbar. Then click Files and import the files you want to use to Filmora. Select the imported files, and drag and drop them into the timeline panel.

Step 3 – Enable AI Vocal Removal

Select the audio track or music clip you want to use in the timeline. Navigate toward the Tools tab at the top toolbar. Choose the Audio option from the drop-down menu and click on the AI Vocal Remover.

Method 2: Running AI Vocal Remover from the Timeline

Once you upload media Filmora, select the media that you want to remove vocal from. Then drag and drop it to the timeline panel. Right-click on the video and choose the AI Vocal Remover from the options panel. This will automatically remove vocals from the video.

Compared to Audacity, Filmora’s AI Vocal Remover tool is quick and easy to use. It will facilitate your video editing process by allowing you to remove vocals and use instrumentals on the go. For instance, this feature allows you to easily dub any video without having to cover up the current vocals. This means that your videos will be more entertaining and engaging while keeping great soundtracks. Match the energy in your videos with the quality of the instrumentals with just a few clicks.

Conclusion

Removing vocals from a video song or audio file gives you more freedom in your projects. You can use the audio as an instrumental or in other creative ways. Audacity is among the most popular vocal removers on the internet. It offers several ways to remove vocals clearly from your audio tracks or music files. Vocal isolation audacity is easy and takes only a few steps. However, we recommend the AI vocal remover feature by Filmora because it is more versatile and accurate. The automated feature takes care of everything for you when removing the vocals from your audio files. You also get to utilize other useful video editing features that automate mundane tasks.

“Disabling Background Chatter in TikTok Videos: Three Streamlined Techniques”

TikTok provides some enjoyment, comfort, and inside jokes, contributing to developing a sense of community among its users.

However, you probably wouldn’t have needed to learn how to mute audio in TikTok two or three years ago, but we’re now living in one of the most turbulent periods in human history, so it’s a skill that’s become more critical.

When you upload specific popular music files to TikTok, you won’t be able to publish the video or find it muted because of the copyright restrictions placed on the audio files. So, how will you turn off the music on TikTok and choose a different soundtrack to listen to? Naturally, you may directly alter the audio level in TikTok. When you need to swap for another one and sync it with your audio, you can learn more about the best alternative and how to mute TikTok audio using three different ways.

Part 1: Method 1: Use the TikTok Built-In Editor to Mute Audio

You should be aware that the music files obtained from TikTok can only be helpful for a personal account, even if you are utilizing the music files obtained from TikTok. If you need to repost the TikTok video or add new soundtracks immediately, you must first learn how to mute audio on the TikTok video using the following method. This is required regardless of whatever option you choose.

Step1 Launch TikTok on Your Device

Log in to your account, then go to the clip whose sound you wish to mute. To turn off the sound on the TikTok video, you must go to the editing page and choose the Sounds option.

Step2 Modify the Sound

Choose a sound at random to add to your video, such as “Cold-Blooded,” then press the “Loudness” option to change the sound’s volume or remix it to create a new sound.

Step3 Mute the Audio

You can silence the video on TikTok by moving the Added and Original sound sliders until they shift to zero. This will mute the additional sound that you added to the TikTok video.

A Guide to Turning Off the Sound on TikTok Before You Record

Here is a guide on how to mute audio in TikTok before recording.

Step1 Start TikTok App

Download a video with no sound and save it in your device’s memory as the first step. Start the TikTok app from the home screen or the app drawer on your device and access the new video screen by tapping the + sign at the bottom of the screen.

Step2 Choose the File to Mute

Select the movie to be mute, click the Next button, then hit the Post button once you have tapped the Upload button. After tapping the disc symbol, select Add to Favorites from the menu and produce a Noise.

Step3 Mute the Audio

Return to the screen that displays the new video. Now, mute audio on TikTok by tapping the Add Sound menu at the top of the screen. Then pick the mute video option that appears under the My Favorites area. Include Noise.

Step4 Record

Finally, to make a new video, tap the Record button, and follow the on-screen instructions to post the silent video to the TikTok platform.

How to Turn Off Sound in TikTok Clip

Crazy about posting TikTok Clips? Well, read on to learn how to mute original audio in TikTok.

Step1 Visit New Video Page

Go to the new video page, where you may either shoot a video or upload the one you already have.

Step2 Add New Sound

Tap the Sound option at the bottom left portion of the screen once the video uploads to the sound screen. In this section, you will find the option to add a new sound to the video.

Step3 Lower Original Sound

From the bottom, go to the tab labeled “Volume.” TikTok users may turn off the original audio by lowering the “Original sound” slider to 0. To silence the video on TikTok, reduce the original sound volume and add sounds until they reach 0 percent.

Lastly, publish the video by clicking the Next button.

Note: after adding a sound to a clip on TikTok, you have the option to silence it by tapping the Cut symbol on the toolbar.

Part 2: Method 2: Use Filmora to Remove the Original Audio and Upload it to TikTok Directly

On TikTok, you cannot mute the video’s sound and then repost it. Instead, you will need to choose new music that works better with the movie and then sync the file. Filmora from Wondershare is a multifunctional audio editor that you can use to handle the sound files of TikTok. This editor offers features that include muting the music on TikTok, syncing the audio with the video, increasing the audio loudness, and many more. You can also modify the audio files, reduce the audio clip, combine several sound recordings, and use other complex capabilities.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Here is how to mute the original audio on TikTok using Filmora:

Step1 Download and Install Filmora

Launch the program and import the video you want to add to your TikTok.

You can insert another sound or mute the current sound completely. Adjust the Volume option slider to mute the audio of the TikTok video and go-to export. Click the TikTok Menu option.

Step2 Log in to your TikTok Account

Now, log in to your TikTok account and export your video directly to TikTok.

Part 3: FAQs

1. How do I mute a video in an editor?

You may mute a video by uploading it or importing it from a website like YouTube. Make sure your video has audio since turning the volume down won’t do anything if it doesn’t. Use the context menu to choose Mute after right-clicking on the video clip. The audio on the video clip will delete due to this action, but the audio will remain for that particular clip.

2. How do you edit sound on TikTok?

If you choose the scissors symbol with your finger, you’ll see a waveform emerge at the bottom of the screen. You may go to the song segment you wish to hear using your finger. From that location, you can see the song’s time stamps. You may also control the volume of the sound by using the option “Volume,” located at the very bottom of the screen.

3. How do I repair a video muted on TikTok?

In case TikTok muted your video for any reason, you try these two options:

1. Delete the video, reupload it to TikTok, and then add sound to it while editing it so the video may get played. After that, reduce the sound level until it reaches zero, and you will be able to submit the video. You can include any sound in the video.
2. Ensure you do not reupload the exact video. You can use an external video editing tool like Filmora to add effects and cut the video into shorter clips. Once done, try reuploading the video and follow the TikTok guidelines this time.

Adding a sound to your video and lowering the level of that sound to zero is one way to prevent your video from being removed for violating copyright laws.

Conclusion

Thus, this tutorial covered how to mute your TikTok audio before and after you publish a video. You can instantly alter the level of the music already on the device or any additional sounds by using the built-in Sound function. Besides, we also listed the best tool, Filmora, via which you can generate silent movies for the social platform. In short, if a sound isn’t available on TikTok, you can get past TikTok’s limited library by producing your film using an additional editing tool like Filmora. This program also guides you on how to mute original audio in TikTok. It will help if you either get stuck composing your music or use the already available sounds on TikTok.

Part 2: Method 2: Use Filmora to Remove the Original Audio and Upload it to TikTok Directly

On TikTok, you cannot mute the video’s sound and then repost it. Instead, you will need to choose new music that works better with the movie and then sync the file. Filmora from Wondershare is a multifunctional audio editor that you can use to handle the sound files of TikTok. This editor offers features that include muting the music on TikTok, syncing the audio with the video, increasing the audio loudness, and many more. You can also modify the audio files, reduce the audio clip, combine several sound recordings, and use other complex capabilities.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Here is how to mute the original audio on TikTok using Filmora:

Step1 Download and Install Filmora

Launch the program and import the video you want to add to your TikTok.

You can insert another sound or mute the current sound completely. Adjust the Volume option slider to mute the audio of the TikTok video and go-to export. Click the TikTok Menu option.

Step2 Log in to your TikTok Account

Now, log in to your TikTok account and export your video directly to TikTok.

Part 3: FAQs

1. How do I mute a video in an editor?

You may mute a video by uploading it or importing it from a website like YouTube. Make sure your video has audio since turning the volume down won’t do anything if it doesn’t. Use the context menu to choose Mute after right-clicking on the video clip. The audio on the video clip will delete due to this action, but the audio will remain for that particular clip.

2. How do you edit sound on TikTok?

If you choose the scissors symbol with your finger, you’ll see a waveform emerge at the bottom of the screen. You may go to the song segment you wish to hear using your finger. From that location, you can see the song’s time stamps. You may also control the volume of the sound by using the option “Volume,” located at the very bottom of the screen.

3. How do I repair a video muted on TikTok?

In case TikTok muted your video for any reason, you try these two options:

1. Delete the video, reupload it to TikTok, and then add sound to it while editing it so the video may get played. After that, reduce the sound level until it reaches zero, and you will be able to submit the video. You can include any sound in the video.
2. Ensure you do not reupload the exact video. You can use an external video editing tool like Filmora to add effects and cut the video into shorter clips. Once done, try reuploading the video and follow the TikTok guidelines this time.

Adding a sound to your video and lowering the level of that sound to zero is one way to prevent your video from being removed for violating copyright laws.

Conclusion

Thus, this tutorial covered how to mute your TikTok audio before and after you publish a video. You can instantly alter the level of the music already on the device or any additional sounds by using the built-in Sound function. Besides, we also listed the best tool, Filmora, via which you can generate silent movies for the social platform. In short, if a sound isn’t available on TikTok, you can get past TikTok’s limited library by producing your film using an additional editing tool like Filmora. This program also guides you on how to mute original audio in TikTok. It will help if you either get stuck composing your music or use the already available sounds on TikTok.

Also read: