The Premier Selection of Zero-Cost Sound Balancers

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

“Discovering the Free World of Vocal Transformation: Rankings & Reviews - Top 7 List “

Modulating a voice recording and changing how your voice sounds can be a great way of having fun with your friends on social media. You can use countless voice changers for free on the Internet, but their scope of voice filters and voice recording capabilities vary. Moreover, the process of saving or sharing the audio files you create with these platforms can be more or less complicated.

In this article, we are going to help you find the best online voice changer you can use to modulate voices in just a few quick and easy steps. But first, you can start from a offline voice changer.

Looking For a Tool for Changing Voice while Making a Video? Here is the one!

Filmora Video Editor gives you 3 ways to change your voice, tune up and down, change the audio equalizer, and apply voice effects. Find the specific tutorial in the following video. Use the comprehensive video editing tool to discover the magic of videomaking! [Offline Program]

Try Voice Changer - Voice Editor Try Voice Changer - Voice Editor

Try It Free >>

Note: Filmora’s online version is upcoming this October! Stay tuned!

Best Free Voice Changer Online

Adding effects to voice recordings you made with an online tool or recorded with a digital audio workstation isn’t a technical or complicated process. However, the number of audio files you can upload to a voice changer platform, the maximum duration of a voice recording, or the selection of voice affects the platform offers can all help you if the online voice changer you are considering is the right choice for you.

1 - VoiceChanger.io	2 - Myvoicemod
3 - Media.io	4 - Voice-changer
5 - Online Tone Generator	6 - LingoJam
7 - Voice Spice Recorder

1. VoiceChanger.io

As its name suggests, VoiceChanger.io is designed with just one task in mind. If you are looking for a way to change voices in a pre-recorded audio file or create a new one Voice Changer is one of your best choices.

All you need to start a new audio recording session is a microphone and a web browser, but you should keep in mind that the quality of the voice recording depends on your microphone. In addition, the Voice Changer tool only allows you to upload files that are stored on the hard drive of the device you are using to browse the Internet.

Once you’ve completed the voice recording session you can choose from dozens of voice effects that can make you sound like an alien or a villain from a superhero movie. You can’t share your creations on social media directly from this Voice Changer, as you must first download a voice recording you created with this online tool and then upload it to your accounts on social media.

2. Myvoicemod

Recording and modulating voices with this online tool is a quick and effortless process anyone can complete in just a few clicks. You can either choose to record a new audio file or upload an existing one, but before you start a new recording session you must ensure that a microphone is connected to your computer.

Afterward, you can proceed to record the voices you would like to modulate, and once you’re done you can just click on one of the available voice effects. The recording to which you applied the effect will start playing as soon as you click on Space, Fast, or Under Water effects, which enables you to preview the results before downloading the voice recording you modified. Myvoicemod offers only twelve voice effects and you cannot specify the portion of the audio file to which you would like to apply an effect you selected.

Filmora Voice Changer

Change Voice and Edit Audio with Ease

Easily change your voice from your sound to another person’s sound, as well as get more funny sound effects.

Modify & Change Voice Recording Modify & Change Voice Recording Learn More >

Try It Free >>

3. Media.io

Media.io is a rising comprehensive media editing websites. It’s Voice Changer functions offers various voice filter for changing sound.

You can easily switch gender voice with a couple of clicks. Go high-pitched with anime girls or kids’ screams. Media.io is powered by AI, which give you more options to perform voice like the animation actor, cartoon character, or pop star that you want.

4. Voice-changer

Voice-changer is a simple and fun tool that reduces the amount of time you have to spend modulating a voice to the very minimum. You just have to upload the file from your computer or record a new one and then click on one of the effects displayed at the bottom of the page.

This online voice changer doesn’t let you adjust the bit rate or any other audio recording setting, which makes it difficult to control the noise or the peak levels in the audio files you are creating. Additionally, Voice-changer features only a limited range of voice effects and it doesn’t offer much more than the standard options that make your voice sound robotic or like you were talking from a cave. In addition, the voice recordings you modulate with this tool can only be saved in WAV format, since Voice-changer doesn’t allow its users to choose the file format of the output audio files.

Best Voice Changer for Offline Use

Convert voice to another voice by using different ways. Customize and re-edit audio with powerful audio and video editor!

Edit Video Free Edit Video Free

Learn More >>

Try It Free >>

5. Online Tone Generator

Besides primarily being a noise generating platform, Online Tone Generator also offers a tool you can use to modulate voices. However, you can’t record audio with this tool, and you must use another online platform or DAW to create an audio file you would like to modulate with this platform. Furthermore, the Pitch Shifter tool only lets you change the pitch of an audio file by using the Pitch Shift slider or inserting a new value into the box next to the Semitones option.

The download process is needlessly complicated since you make sure that the Save output to downloadable file checkbox is selected, then play the audio file for as long as you would like the output file to be, and then click on the link that is displayed in the Recordings section of the screen. All audio files you edit with the Pitch Shifter tool are going to be saved in MP3 format.

6. LingoJam – Female to Male Voice Changer

LingoJam is a website where you can create your own online translator, or discover translators that were created by LingoJam’s users. The platform’s Female to Male Voice Changer tool lets you record or upload an audio clip and then select one of the available pitch options.

Besides selecting a low or high pitch you can also apply the Chipmunk or Mountain Troll preset voice effects to your audio recordings. As soon as you upload an audio file or finish an audio recording session the file will be displayed in the Output Audio section of the screen where you can listen to the result before you download them to your computer. You can’t choose the output file format, and all voice recordings you edit with this tool are going to be saved in the WAV file format.

7. Voice Spice Recorder

You can record new audio or use the platform’s Text-to-Speech option to start the voice changing process, but uploading a file to Voice Spice Recorder from your computer isn’t available. The platform provides you with a basic set of audio recording settings that enable you to choose how loud your microphone will be or if you want to apply an effect like Hell Demon, Space Squirrel, or change the voice from male to male female.

After recording your voice, you can click on the Save button and add the title of the file, its author, or comments. Voice Spice Recorder lets you choose to share your audio file on Facebook, Twitter or create a sharable link. Optionally, you can also use Voice Spice Recorder to browse through the recordings created by other platform users.

Conclusion

Changing voices in your audio recordings online is a free and simple process that takes a minimum amount of time and effort. Most of the voice changers you can find on the Internet offer different preset voice effects but fail to provide the tools you need to edit audio files you create with them.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Try It Free >>

Note: Filmora’s online version is upcoming this October! Stay tuned!

Best Free Voice Changer Online

Adding effects to voice recordings you made with an online tool or recorded with a digital audio workstation isn’t a technical or complicated process. However, the number of audio files you can upload to a voice changer platform, the maximum duration of a voice recording, or the selection of voice affects the platform offers can all help you if the online voice changer you are considering is the right choice for you.

1 - VoiceChanger.io	2 - Myvoicemod
3 - Media.io	4 - Voice-changer
5 - Online Tone Generator	6 - LingoJam
7 - Voice Spice Recorder

1. VoiceChanger.io

As its name suggests, VoiceChanger.io is designed with just one task in mind. If you are looking for a way to change voices in a pre-recorded audio file or create a new one Voice Changer is one of your best choices.

All you need to start a new audio recording session is a microphone and a web browser, but you should keep in mind that the quality of the voice recording depends on your microphone. In addition, the Voice Changer tool only allows you to upload files that are stored on the hard drive of the device you are using to browse the Internet.

Once you’ve completed the voice recording session you can choose from dozens of voice effects that can make you sound like an alien or a villain from a superhero movie. You can’t share your creations on social media directly from this Voice Changer, as you must first download a voice recording you created with this online tool and then upload it to your accounts on social media.

2. Myvoicemod

Recording and modulating voices with this online tool is a quick and effortless process anyone can complete in just a few clicks. You can either choose to record a new audio file or upload an existing one, but before you start a new recording session you must ensure that a microphone is connected to your computer.

Afterward, you can proceed to record the voices you would like to modulate, and once you’re done you can just click on one of the available voice effects. The recording to which you applied the effect will start playing as soon as you click on Space, Fast, or Under Water effects, which enables you to preview the results before downloading the voice recording you modified. Myvoicemod offers only twelve voice effects and you cannot specify the portion of the audio file to which you would like to apply an effect you selected.

Filmora Voice Changer

Change Voice and Edit Audio with Ease

Easily change your voice from your sound to another person’s sound, as well as get more funny sound effects.

Modify & Change Voice Recording Modify & Change Voice Recording Learn More >

Try It Free >>

3. Media.io

Media.io is a rising comprehensive media editing websites. It’s Voice Changer functions offers various voice filter for changing sound.

You can easily switch gender voice with a couple of clicks. Go high-pitched with anime girls or kids’ screams. Media.io is powered by AI, which give you more options to perform voice like the animation actor, cartoon character, or pop star that you want.

4. Voice-changer

Voice-changer is a simple and fun tool that reduces the amount of time you have to spend modulating a voice to the very minimum. You just have to upload the file from your computer or record a new one and then click on one of the effects displayed at the bottom of the page.

This online voice changer doesn’t let you adjust the bit rate or any other audio recording setting, which makes it difficult to control the noise or the peak levels in the audio files you are creating. Additionally, Voice-changer features only a limited range of voice effects and it doesn’t offer much more than the standard options that make your voice sound robotic or like you were talking from a cave. In addition, the voice recordings you modulate with this tool can only be saved in WAV format, since Voice-changer doesn’t allow its users to choose the file format of the output audio files.

Best Voice Changer for Offline Use

Convert voice to another voice by using different ways. Customize and re-edit audio with powerful audio and video editor!

Edit Video Free Edit Video Free

Learn More >>

Try It Free >>

5. Online Tone Generator

Besides primarily being a noise generating platform, Online Tone Generator also offers a tool you can use to modulate voices. However, you can’t record audio with this tool, and you must use another online platform or DAW to create an audio file you would like to modulate with this platform. Furthermore, the Pitch Shifter tool only lets you change the pitch of an audio file by using the Pitch Shift slider or inserting a new value into the box next to the Semitones option.

The download process is needlessly complicated since you make sure that the Save output to downloadable file checkbox is selected, then play the audio file for as long as you would like the output file to be, and then click on the link that is displayed in the Recordings section of the screen. All audio files you edit with the Pitch Shifter tool are going to be saved in MP3 format.

6. LingoJam – Female to Male Voice Changer

LingoJam is a website where you can create your own online translator, or discover translators that were created by LingoJam’s users. The platform’s Female to Male Voice Changer tool lets you record or upload an audio clip and then select one of the available pitch options.

Besides selecting a low or high pitch you can also apply the Chipmunk or Mountain Troll preset voice effects to your audio recordings. As soon as you upload an audio file or finish an audio recording session the file will be displayed in the Output Audio section of the screen where you can listen to the result before you download them to your computer. You can’t choose the output file format, and all voice recordings you edit with this tool are going to be saved in the WAV file format.

7. Voice Spice Recorder

You can record new audio or use the platform’s Text-to-Speech option to start the voice changing process, but uploading a file to Voice Spice Recorder from your computer isn’t available. The platform provides you with a basic set of audio recording settings that enable you to choose how loud your microphone will be or if you want to apply an effect like Hell Demon, Space Squirrel, or change the voice from male to male female.

After recording your voice, you can click on the Save button and add the title of the file, its author, or comments. Voice Spice Recorder lets you choose to share your audio file on Facebook, Twitter or create a sharable link. Optionally, you can also use Voice Spice Recorder to browse through the recordings created by other platform users.

Conclusion

Changing voices in your audio recordings online is a free and simple process that takes a minimum amount of time and effort. Most of the voice changers you can find on the Internet offer different preset voice effects but fail to provide the tools you need to edit audio files you create with them.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Try It Free >>

Note: Filmora’s online version is upcoming this October! Stay tuned!

Best Free Voice Changer Online

Adding effects to voice recordings you made with an online tool or recorded with a digital audio workstation isn’t a technical or complicated process. However, the number of audio files you can upload to a voice changer platform, the maximum duration of a voice recording, or the selection of voice affects the platform offers can all help you if the online voice changer you are considering is the right choice for you.

1 - VoiceChanger.io	2 - Myvoicemod
3 - Media.io	4 - Voice-changer
5 - Online Tone Generator	6 - LingoJam
7 - Voice Spice Recorder

1. VoiceChanger.io

As its name suggests, VoiceChanger.io is designed with just one task in mind. If you are looking for a way to change voices in a pre-recorded audio file or create a new one Voice Changer is one of your best choices.

All you need to start a new audio recording session is a microphone and a web browser, but you should keep in mind that the quality of the voice recording depends on your microphone. In addition, the Voice Changer tool only allows you to upload files that are stored on the hard drive of the device you are using to browse the Internet.

Once you’ve completed the voice recording session you can choose from dozens of voice effects that can make you sound like an alien or a villain from a superhero movie. You can’t share your creations on social media directly from this Voice Changer, as you must first download a voice recording you created with this online tool and then upload it to your accounts on social media.

2. Myvoicemod

Recording and modulating voices with this online tool is a quick and effortless process anyone can complete in just a few clicks. You can either choose to record a new audio file or upload an existing one, but before you start a new recording session you must ensure that a microphone is connected to your computer.

Afterward, you can proceed to record the voices you would like to modulate, and once you’re done you can just click on one of the available voice effects. The recording to which you applied the effect will start playing as soon as you click on Space, Fast, or Under Water effects, which enables you to preview the results before downloading the voice recording you modified. Myvoicemod offers only twelve voice effects and you cannot specify the portion of the audio file to which you would like to apply an effect you selected.

Filmora Voice Changer

Change Voice and Edit Audio with Ease

Easily change your voice from your sound to another person’s sound, as well as get more funny sound effects.

Modify & Change Voice Recording Modify & Change Voice Recording Learn More >

Try It Free >>

3. Media.io

Media.io is a rising comprehensive media editing websites. It’s Voice Changer functions offers various voice filter for changing sound.

You can easily switch gender voice with a couple of clicks. Go high-pitched with anime girls or kids’ screams. Media.io is powered by AI, which give you more options to perform voice like the animation actor, cartoon character, or pop star that you want.

4. Voice-changer

Voice-changer is a simple and fun tool that reduces the amount of time you have to spend modulating a voice to the very minimum. You just have to upload the file from your computer or record a new one and then click on one of the effects displayed at the bottom of the page.

This online voice changer doesn’t let you adjust the bit rate or any other audio recording setting, which makes it difficult to control the noise or the peak levels in the audio files you are creating. Additionally, Voice-changer features only a limited range of voice effects and it doesn’t offer much more than the standard options that make your voice sound robotic or like you were talking from a cave. In addition, the voice recordings you modulate with this tool can only be saved in WAV format, since Voice-changer doesn’t allow its users to choose the file format of the output audio files.

Best Voice Changer for Offline Use

Convert voice to another voice by using different ways. Customize and re-edit audio with powerful audio and video editor!

Edit Video Free Edit Video Free

Learn More >>

Try It Free >>

5. Online Tone Generator

Besides primarily being a noise generating platform, Online Tone Generator also offers a tool you can use to modulate voices. However, you can’t record audio with this tool, and you must use another online platform or DAW to create an audio file you would like to modulate with this platform. Furthermore, the Pitch Shifter tool only lets you change the pitch of an audio file by using the Pitch Shift slider or inserting a new value into the box next to the Semitones option.

The download process is needlessly complicated since you make sure that the Save output to downloadable file checkbox is selected, then play the audio file for as long as you would like the output file to be, and then click on the link that is displayed in the Recordings section of the screen. All audio files you edit with the Pitch Shifter tool are going to be saved in MP3 format.

6. LingoJam – Female to Male Voice Changer

LingoJam is a website where you can create your own online translator, or discover translators that were created by LingoJam’s users. The platform’s Female to Male Voice Changer tool lets you record or upload an audio clip and then select one of the available pitch options.

Besides selecting a low or high pitch you can also apply the Chipmunk or Mountain Troll preset voice effects to your audio recordings. As soon as you upload an audio file or finish an audio recording session the file will be displayed in the Output Audio section of the screen where you can listen to the result before you download them to your computer. You can’t choose the output file format, and all voice recordings you edit with this tool are going to be saved in the WAV file format.

7. Voice Spice Recorder

You can record new audio or use the platform’s Text-to-Speech option to start the voice changing process, but uploading a file to Voice Spice Recorder from your computer isn’t available. The platform provides you with a basic set of audio recording settings that enable you to choose how loud your microphone will be or if you want to apply an effect like Hell Demon, Space Squirrel, or change the voice from male to male female.

After recording your voice, you can click on the Save button and add the title of the file, its author, or comments. Voice Spice Recorder lets you choose to share your audio file on Facebook, Twitter or create a sharable link. Optionally, you can also use Voice Spice Recorder to browse through the recordings created by other platform users.

Conclusion

Changing voices in your audio recordings online is a free and simple process that takes a minimum amount of time and effort. Most of the voice changers you can find on the Internet offer different preset voice effects but fail to provide the tools you need to edit audio files you create with them.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Try It Free >>

Note: Filmora’s online version is upcoming this October! Stay tuned!

Best Free Voice Changer Online

Adding effects to voice recordings you made with an online tool or recorded with a digital audio workstation isn’t a technical or complicated process. However, the number of audio files you can upload to a voice changer platform, the maximum duration of a voice recording, or the selection of voice affects the platform offers can all help you if the online voice changer you are considering is the right choice for you.

1 - VoiceChanger.io	2 - Myvoicemod
3 - Media.io	4 - Voice-changer
5 - Online Tone Generator	6 - LingoJam
7 - Voice Spice Recorder

1. VoiceChanger.io

As its name suggests, VoiceChanger.io is designed with just one task in mind. If you are looking for a way to change voices in a pre-recorded audio file or create a new one Voice Changer is one of your best choices.

All you need to start a new audio recording session is a microphone and a web browser, but you should keep in mind that the quality of the voice recording depends on your microphone. In addition, the Voice Changer tool only allows you to upload files that are stored on the hard drive of the device you are using to browse the Internet.

Once you’ve completed the voice recording session you can choose from dozens of voice effects that can make you sound like an alien or a villain from a superhero movie. You can’t share your creations on social media directly from this Voice Changer, as you must first download a voice recording you created with this online tool and then upload it to your accounts on social media.

2. Myvoicemod

Recording and modulating voices with this online tool is a quick and effortless process anyone can complete in just a few clicks. You can either choose to record a new audio file or upload an existing one, but before you start a new recording session you must ensure that a microphone is connected to your computer.

Afterward, you can proceed to record the voices you would like to modulate, and once you’re done you can just click on one of the available voice effects. The recording to which you applied the effect will start playing as soon as you click on Space, Fast, or Under Water effects, which enables you to preview the results before downloading the voice recording you modified. Myvoicemod offers only twelve voice effects and you cannot specify the portion of the audio file to which you would like to apply an effect you selected.

Filmora Voice Changer

Change Voice and Edit Audio with Ease

Easily change your voice from your sound to another person’s sound, as well as get more funny sound effects.

Modify & Change Voice Recording Modify & Change Voice Recording Learn More >

Try It Free >>

3. Media.io

Media.io is a rising comprehensive media editing websites. It’s Voice Changer functions offers various voice filter for changing sound.

You can easily switch gender voice with a couple of clicks. Go high-pitched with anime girls or kids’ screams. Media.io is powered by AI, which give you more options to perform voice like the animation actor, cartoon character, or pop star that you want.

4. Voice-changer

Voice-changer is a simple and fun tool that reduces the amount of time you have to spend modulating a voice to the very minimum. You just have to upload the file from your computer or record a new one and then click on one of the effects displayed at the bottom of the page.

This online voice changer doesn’t let you adjust the bit rate or any other audio recording setting, which makes it difficult to control the noise or the peak levels in the audio files you are creating. Additionally, Voice-changer features only a limited range of voice effects and it doesn’t offer much more than the standard options that make your voice sound robotic or like you were talking from a cave. In addition, the voice recordings you modulate with this tool can only be saved in WAV format, since Voice-changer doesn’t allow its users to choose the file format of the output audio files.

Best Voice Changer for Offline Use

Convert voice to another voice by using different ways. Customize and re-edit audio with powerful audio and video editor!

Edit Video Free Edit Video Free

Learn More >>

Try It Free >>

5. Online Tone Generator

Besides primarily being a noise generating platform, Online Tone Generator also offers a tool you can use to modulate voices. However, you can’t record audio with this tool, and you must use another online platform or DAW to create an audio file you would like to modulate with this platform. Furthermore, the Pitch Shifter tool only lets you change the pitch of an audio file by using the Pitch Shift slider or inserting a new value into the box next to the Semitones option.

The download process is needlessly complicated since you make sure that the Save output to downloadable file checkbox is selected, then play the audio file for as long as you would like the output file to be, and then click on the link that is displayed in the Recordings section of the screen. All audio files you edit with the Pitch Shifter tool are going to be saved in MP3 format.

6. LingoJam – Female to Male Voice Changer

LingoJam is a website where you can create your own online translator, or discover translators that were created by LingoJam’s users. The platform’s Female to Male Voice Changer tool lets you record or upload an audio clip and then select one of the available pitch options.

Besides selecting a low or high pitch you can also apply the Chipmunk or Mountain Troll preset voice effects to your audio recordings. As soon as you upload an audio file or finish an audio recording session the file will be displayed in the Output Audio section of the screen where you can listen to the result before you download them to your computer. You can’t choose the output file format, and all voice recordings you edit with this tool are going to be saved in the WAV file format.

7. Voice Spice Recorder

You can record new audio or use the platform’s Text-to-Speech option to start the voice changing process, but uploading a file to Voice Spice Recorder from your computer isn’t available. The platform provides you with a basic set of audio recording settings that enable you to choose how loud your microphone will be or if you want to apply an effect like Hell Demon, Space Squirrel, or change the voice from male to male female.

After recording your voice, you can click on the Save button and add the title of the file, its author, or comments. Voice Spice Recorder lets you choose to share your audio file on Facebook, Twitter or create a sharable link. Optionally, you can also use Voice Spice Recorder to browse through the recordings created by other platform users.

Conclusion

Changing voices in your audio recordings online is a free and simple process that takes a minimum amount of time and effort. Most of the voice changers you can find on the Internet offer different preset voice effects but fail to provide the tools you need to edit audio files you create with them.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

A Practical Walkthrough for Logging Your Google Voice Calls Using Phone Applications and Desktop Operating Systems

Many people think that the call-recording feature is only helpful to deal with stalkers and obsessive exes. However, there are several other reasons as well.

Call recording features help you in numerous ways such as conducting remote interviews, keeping track of verbal agreements, and recording important meetings for later reference. A myriad of applications are available on iPhone and android.

Since most voice recording applications are expensive, Google voice turns out to be one of the best apps to record calls.

What Is Google Voice?

The Google voice recording app is available on Android and iOS app stores and enables users to record calls, send text messages, customize voicemails, and save call recording transcripts. Previously, this app required a Google Voice invite code for registration. But, now as a Gmail user, you can download and record your calls with Google Voice for free.

How to Use Google Voice

When you will register with Google voice recorder, you will receive a mobile number that connects your work phone, desk phone, mobile phone, and even VoIP lines. Using this app, you can allocate different callers on different phones. Furthermore, the application enables you to record calls and save call transcripts.

How Does Google Voice Work?

When you create a new account on Google voice, you receive a phone number for voicemails, texts, and calls. The number enables you to make international and domestic calls from your mobile devices and web browser. Google audio recorder allows users to choose their existing number. Now let’s explore some features of Google Voice:

• Call routing
• Call blocking
• Listen to voicemail before responding to a call
• Voicemail transcripts
• Google voice call recording
• Conference calling
• Choose a different ringtone for different users
• Free PC to phone calls within North America
• Free PC to PC video and voice calls
• Receive notifications

How to Record Calls with Google Voice?

Google voice is a built-in recording tool for iOS and android devices. This tool enables you to capture and record calls so that you don’t miss any important conversations. For instance, if you are taking an on-call session with your professor, you can record your calls with Google Voice and save them for later reference.

Also, you can use Google voice recording as a default application for incoming calls. However, before that, you should enable the application from Settings. Follow these steps to record your calls with Google Voice:

• Open the application and visit the homepage
• From the upper left corner choose settings
• Click on the ‘Calls’ option from the menu
• Find enable the incoming call options
• Once activated you can record your calls with Google Voice by pressing number 4 on the keypad.

How to Record a Google Voice Call on Android

Here are some steps to Google voice record call on Android:

1. Install Google Voice

Google voice is better than various paid voice recording applications that you can download from Google Play. Initially, most call recording application work fine, but after a while, the apps stop working. In this case, you can download a new app or purchase the subscription.

Therefore, make sure you record your calls with Google Voice and save t money. One drawback of Google Voice is that you can record incoming calls only. Google voice recorder doesn’t support outgoing calls.

2. Create a Google Voice Number

Now open the app and press the ‘Get Started’ tab on the landing page. This will open the ‘Manage accounts page. On this page, you have to choose your Google account to link with your new Google Voice number. After you choose an account, the app leads you to the Terms and Conditions page, where you can read the policy and Accept to proceed.

Alt Text: welcome to Google voice

A new page will open where you should choose a Google Voice number. Tap on ‘Search’ and find your city to pick a number. Also, you can choose suggested cities to get started. A list of numbers will appear on the following page. You can select any number you want to link with your Google account. Now a confirmation page will appear. On this page select the options and click ‘Next’.

Once you choose a new number, you have to verify your account with the existing number. Enter your mobile number and click on ‘Send Code’ to receive a verification code. The app’s algorithm will generate a six-digit code and send it to your existing number. Use this code to verify your identity. If the code is correct, your new Google voice recording number will activate. Now click on ‘Finish’ and you can record your calls with Google Voice.

3. Set Up Incoming Call Recordings

Still, there is a step left to record your calls. You need to go to mobile settings and enable call recording. To enable call recordings, you need to click on the menu icon and navigate to the ‘settings’ from the sidebar menu. Now select the ‘Incoming calls options’ and turn on the recordings.

4. Record Incoming Calls

After completing the setup, you can record incoming calls on your phone using Google Voice. However, every time you receive a call, you must open the dial pad and press 4 to start recording. As soon as you start recording, the caller will receive a verbal alert that notifies that the call is on recording mode. You can stop recording by pressing 4 one more time. This will also inform the user that you stopped the recording.

5. Access Recordings

You can easily check voice recordings for each call. All you need to do is open the last call details and press ‘Voicemail’. This will expand the list of recordings. Now tap on the play button and listen to the audio.

6. Save Transcripts

When you record your calls with Google Voice, the recordings will save in the app storage. However, you can save and share those recordings in your mobile phone storage by selecting the ellipsis (•••) button. You will find the button on the recording page as some options will appear on the screen. You have to choose ‘Copy transcript’ and paste it in the message or notepad. Keep in mind that you can only save transcripts of recorded calls.

Closing Word

Now that you know simple and easy steps to record your calls with Google Voice, you can grab your device and get started. The Google voice recorder is a significantly helpful app with built-in features. You can also create a video out of the recordings using a simple video editor, Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora editing video empowers your story and allows you to splice multiple audio and videos. Learn how to edit audio using Filmora and transform your call recordings into something creative. Here are some benefits of using Wondershare Filmora:

• Audio equalize
• Audio enhancement
• Advanced text editing
• Video and audio controls
• Audio separation
• Audio-mixer
• Speed control
• Add background music

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

How to Record Calls with Google Voice?

Google voice is a built-in recording tool for iOS and android devices. This tool enables you to capture and record calls so that you don’t miss any important conversations. For instance, if you are taking an on-call session with your professor, you can record your calls with Google Voice and save them for later reference.

Also, you can use Google voice recording as a default application for incoming calls. However, before that, you should enable the application from Settings. Follow these steps to record your calls with Google Voice:

• Open the application and visit the homepage
• From the upper left corner choose settings
• Click on the ‘Calls’ option from the menu
• Find enable the incoming call options
• Once activated you can record your calls with Google Voice by pressing number 4 on the keypad.

How to Record a Google Voice Call on Android

Here are some steps to Google voice record call on Android:

1. Install Google Voice

Google voice is better than various paid voice recording applications that you can download from Google Play. Initially, most call recording application work fine, but after a while, the apps stop working. In this case, you can download a new app or purchase the subscription.

Therefore, make sure you record your calls with Google Voice and save t money. One drawback of Google Voice is that you can record incoming calls only. Google voice recorder doesn’t support outgoing calls.

2. Create a Google Voice Number

Now open the app and press the ‘Get Started’ tab on the landing page. This will open the ‘Manage accounts page. On this page, you have to choose your Google account to link with your new Google Voice number. After you choose an account, the app leads you to the Terms and Conditions page, where you can read the policy and Accept to proceed.

Alt Text: welcome to Google voice

A new page will open where you should choose a Google Voice number. Tap on ‘Search’ and find your city to pick a number. Also, you can choose suggested cities to get started. A list of numbers will appear on the following page. You can select any number you want to link with your Google account. Now a confirmation page will appear. On this page select the options and click ‘Next’.

Once you choose a new number, you have to verify your account with the existing number. Enter your mobile number and click on ‘Send Code’ to receive a verification code. The app’s algorithm will generate a six-digit code and send it to your existing number. Use this code to verify your identity. If the code is correct, your new Google voice recording number will activate. Now click on ‘Finish’ and you can record your calls with Google Voice.

3. Set Up Incoming Call Recordings

Still, there is a step left to record your calls. You need to go to mobile settings and enable call recording. To enable call recordings, you need to click on the menu icon and navigate to the ‘settings’ from the sidebar menu. Now select the ‘Incoming calls options’ and turn on the recordings.

4. Record Incoming Calls

After completing the setup, you can record incoming calls on your phone using Google Voice. However, every time you receive a call, you must open the dial pad and press 4 to start recording. As soon as you start recording, the caller will receive a verbal alert that notifies that the call is on recording mode. You can stop recording by pressing 4 one more time. This will also inform the user that you stopped the recording.

5. Access Recordings

You can easily check voice recordings for each call. All you need to do is open the last call details and press ‘Voicemail’. This will expand the list of recordings. Now tap on the play button and listen to the audio.

6. Save Transcripts

When you record your calls with Google Voice, the recordings will save in the app storage. However, you can save and share those recordings in your mobile phone storage by selecting the ellipsis (•••) button. You will find the button on the recording page as some options will appear on the screen. You have to choose ‘Copy transcript’ and paste it in the message or notepad. Keep in mind that you can only save transcripts of recorded calls.

Closing Word

Now that you know simple and easy steps to record your calls with Google Voice, you can grab your device and get started. The Google voice recorder is a significantly helpful app with built-in features. You can also create a video out of the recordings using a simple video editor, Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora editing video empowers your story and allows you to splice multiple audio and videos. Learn how to edit audio using Filmora and transform your call recordings into something creative. Here are some benefits of using Wondershare Filmora:

• Audio equalize
• Audio enhancement
• Advanced text editing
• Video and audio controls
• Audio separation
• Audio-mixer
• Speed control
• Add background music

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

How to Record Calls with Google Voice?

Google voice is a built-in recording tool for iOS and android devices. This tool enables you to capture and record calls so that you don’t miss any important conversations. For instance, if you are taking an on-call session with your professor, you can record your calls with Google Voice and save them for later reference.

Also, you can use Google voice recording as a default application for incoming calls. However, before that, you should enable the application from Settings. Follow these steps to record your calls with Google Voice:

• Open the application and visit the homepage
• From the upper left corner choose settings
• Click on the ‘Calls’ option from the menu
• Find enable the incoming call options
• Once activated you can record your calls with Google Voice by pressing number 4 on the keypad.

How to Record a Google Voice Call on Android

Here are some steps to Google voice record call on Android:

1. Install Google Voice

Google voice is better than various paid voice recording applications that you can download from Google Play. Initially, most call recording application work fine, but after a while, the apps stop working. In this case, you can download a new app or purchase the subscription.

Therefore, make sure you record your calls with Google Voice and save t money. One drawback of Google Voice is that you can record incoming calls only. Google voice recorder doesn’t support outgoing calls.

2. Create a Google Voice Number

Now open the app and press the ‘Get Started’ tab on the landing page. This will open the ‘Manage accounts page. On this page, you have to choose your Google account to link with your new Google Voice number. After you choose an account, the app leads you to the Terms and Conditions page, where you can read the policy and Accept to proceed.

Alt Text: welcome to Google voice

A new page will open where you should choose a Google Voice number. Tap on ‘Search’ and find your city to pick a number. Also, you can choose suggested cities to get started. A list of numbers will appear on the following page. You can select any number you want to link with your Google account. Now a confirmation page will appear. On this page select the options and click ‘Next’.

Once you choose a new number, you have to verify your account with the existing number. Enter your mobile number and click on ‘Send Code’ to receive a verification code. The app’s algorithm will generate a six-digit code and send it to your existing number. Use this code to verify your identity. If the code is correct, your new Google voice recording number will activate. Now click on ‘Finish’ and you can record your calls with Google Voice.

3. Set Up Incoming Call Recordings

Still, there is a step left to record your calls. You need to go to mobile settings and enable call recording. To enable call recordings, you need to click on the menu icon and navigate to the ‘settings’ from the sidebar menu. Now select the ‘Incoming calls options’ and turn on the recordings.

4. Record Incoming Calls

After completing the setup, you can record incoming calls on your phone using Google Voice. However, every time you receive a call, you must open the dial pad and press 4 to start recording. As soon as you start recording, the caller will receive a verbal alert that notifies that the call is on recording mode. You can stop recording by pressing 4 one more time. This will also inform the user that you stopped the recording.

5. Access Recordings

You can easily check voice recordings for each call. All you need to do is open the last call details and press ‘Voicemail’. This will expand the list of recordings. Now tap on the play button and listen to the audio.

6. Save Transcripts

When you record your calls with Google Voice, the recordings will save in the app storage. However, you can save and share those recordings in your mobile phone storage by selecting the ellipsis (•••) button. You will find the button on the recording page as some options will appear on the screen. You have to choose ‘Copy transcript’ and paste it in the message or notepad. Keep in mind that you can only save transcripts of recorded calls.

Closing Word

Now that you know simple and easy steps to record your calls with Google Voice, you can grab your device and get started. The Google voice recorder is a significantly helpful app with built-in features. You can also create a video out of the recordings using a simple video editor, Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora editing video empowers your story and allows you to splice multiple audio and videos. Learn how to edit audio using Filmora and transform your call recordings into something creative. Here are some benefits of using Wondershare Filmora:

• Audio equalize
• Audio enhancement
• Advanced text editing
• Video and audio controls
• Audio separation
• Audio-mixer
• Speed control
• Add background music

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

How to Record Calls with Google Voice?

Google voice is a built-in recording tool for iOS and android devices. This tool enables you to capture and record calls so that you don’t miss any important conversations. For instance, if you are taking an on-call session with your professor, you can record your calls with Google Voice and save them for later reference.

Also, you can use Google voice recording as a default application for incoming calls. However, before that, you should enable the application from Settings. Follow these steps to record your calls with Google Voice:

• Open the application and visit the homepage
• From the upper left corner choose settings
• Click on the ‘Calls’ option from the menu
• Find enable the incoming call options
• Once activated you can record your calls with Google Voice by pressing number 4 on the keypad.

How to Record a Google Voice Call on Android

Here are some steps to Google voice record call on Android:

1. Install Google Voice

Google voice is better than various paid voice recording applications that you can download from Google Play. Initially, most call recording application work fine, but after a while, the apps stop working. In this case, you can download a new app or purchase the subscription.

Therefore, make sure you record your calls with Google Voice and save t money. One drawback of Google Voice is that you can record incoming calls only. Google voice recorder doesn’t support outgoing calls.

2. Create a Google Voice Number

Now open the app and press the ‘Get Started’ tab on the landing page. This will open the ‘Manage accounts page. On this page, you have to choose your Google account to link with your new Google Voice number. After you choose an account, the app leads you to the Terms and Conditions page, where you can read the policy and Accept to proceed.

Alt Text: welcome to Google voice

A new page will open where you should choose a Google Voice number. Tap on ‘Search’ and find your city to pick a number. Also, you can choose suggested cities to get started. A list of numbers will appear on the following page. You can select any number you want to link with your Google account. Now a confirmation page will appear. On this page select the options and click ‘Next’.

Once you choose a new number, you have to verify your account with the existing number. Enter your mobile number and click on ‘Send Code’ to receive a verification code. The app’s algorithm will generate a six-digit code and send it to your existing number. Use this code to verify your identity. If the code is correct, your new Google voice recording number will activate. Now click on ‘Finish’ and you can record your calls with Google Voice.

3. Set Up Incoming Call Recordings

Still, there is a step left to record your calls. You need to go to mobile settings and enable call recording. To enable call recordings, you need to click on the menu icon and navigate to the ‘settings’ from the sidebar menu. Now select the ‘Incoming calls options’ and turn on the recordings.

4. Record Incoming Calls

After completing the setup, you can record incoming calls on your phone using Google Voice. However, every time you receive a call, you must open the dial pad and press 4 to start recording. As soon as you start recording, the caller will receive a verbal alert that notifies that the call is on recording mode. You can stop recording by pressing 4 one more time. This will also inform the user that you stopped the recording.

5. Access Recordings

You can easily check voice recordings for each call. All you need to do is open the last call details and press ‘Voicemail’. This will expand the list of recordings. Now tap on the play button and listen to the audio.

6. Save Transcripts

When you record your calls with Google Voice, the recordings will save in the app storage. However, you can save and share those recordings in your mobile phone storage by selecting the ellipsis (•••) button. You will find the button on the recording page as some options will appear on the screen. You have to choose ‘Copy transcript’ and paste it in the message or notepad. Keep in mind that you can only save transcripts of recorded calls.

Closing Word

Now that you know simple and easy steps to record your calls with Google Voice, you can grab your device and get started. The Google voice recorder is a significantly helpful app with built-in features. You can also create a video out of the recordings using a simple video editor, Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora editing video empowers your story and allows you to splice multiple audio and videos. Learn how to edit audio using Filmora and transform your call recordings into something creative. Here are some benefits of using Wondershare Filmora:

• Audio equalize
• Audio enhancement
• Advanced text editing
• Video and audio controls
• Audio separation
• Audio-mixer
• Speed control
• Add background music

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Also read: