Advanced Web Tools for Optimizing Audio Fidelity

In most cases, the most typical request you’ll get from video makers is to eliminate the unpleasant noises like rumble or hum from the completed piece of video. When filming, it’s tough to get good audio since the dialogue is often muffled by ambient noise, such as the dreaded whir of an air conditioning unit or fans. When combining and filming sound effects or other design aspects for the video, background noise is often removed.

Fortunately, there are a few approaches that you can take to remove noise from audio Online. You can denoise your video or audio by adding some background music or using audio or video editing software to reduce noise. If you’re looking for a technique to get rid of background noise, this article will serve you well in your quest. Let’s get started!

In this article

01 What Is Audio Noise And Why Is It Harmful?

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

Step-by-Step: Splitting Audio and Visuals in iMovie Using a Mac

How to Separate Audio from Video in iMovie on Mac?

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Acquiring Crush and Shatter Effects for Sound Design Projects

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

There are a few different places where you can find glass-breaking sound effects. One place is online, on websites like SoundCloud or YouTube. Many apps offer glass-breaking sound effects as part of their library of sounds. A quick internet search will reveal various sites to download these effects for free.

Keep in mind that not all of these sites are completely free. Some of them will only offer free glass-breaking sound effects for certain uses, while others may limit how many times you can use their sounds before charging a fee.

You can also find glass-breaking sounds in libraries of sound effects. These collections are available for purchase, or they may be available to download for free. If you are looking for a specific sound effect, it is often easiest to search for it by name. This will help you to find the right sound effect quickly and easily.

Finally, if you have access to a recording studio, you can record the sound yourself. In this article, we are going to help you with the whole matter with step by step guide. So read on to know more!

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Background Music in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Among many ways to download or create all kinds of sound effect including glass breaking/shattering sound effect, here are some of the ways for you to follow –

1. Freesound

This site has thousands of sound effects available under the Creative Commons 0 license. This means that they can be used for any purpose, personal or commercial, without attribution or permission required. To download music from Freesound, follow these steps.

Step 1: Go to the Freesound website.

Step 2: Search for the sound you want to download.

Step 3: Click on the sound to listen to it.

Step 4: Click on the Download button.

Step 5: Save the sound to your computer.

2. Incompetech

This site offers royalty-free music and sound effects used in a commercial or non-commercial project. All of the sounds are available for download in MP3 format.

Step 1: First of all, go to Incompetech and open up any page on the site. You’ll see that there are links on the left side.

Step 2: Click on one of those links, and you’ll see a list of songs of that category. Once again, click on one of the songs to open up another page where you can listen to it.

Step 3: Once you’re done listening, scroll down, and you’ll see a link that says “Download this song”. Click on the link, and it will start downloading automatically.

Step 4: Once downloaded, go into your project and put in the music track where you want the song to go in. If you want a song to be longer, re-download the song and find that “Download this song” link again. Put it where you want the new end of the music to be.

3. Orange Free Sounds

This site offers various sound effects that are free to download and use in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. Here is how to download a video from orange free sounds step by step.

Step 1: Go to the URL of the video. The URL is the address of the video that you want to download. Copy it and paste it in a new tab or window if your browser doesn’t automatically do it for you.

Step 2: The next step is to go to a website called SaveFrom.net. When the page has loaded, look for the big blue button that says “Download Video”. A new tab or window will open with the download page. It would be best to paste the video URL in the “Enter a video URL” bar.

Step 3: After pasting it, click on “Download this video” (the blue button). When it appears, press on one of them. I usually go for mp3 format because it keeps good quality and it’s the most used format that you can play on many devices.

Step 4: The next step is to wait until it downloads. Depending on your connection speed, it may take a few minutes, but it usually doesn’t even take one minute to download 100Mb videos. When it has finished downloading, look for the green button that says “Download to your computer” (you may have to scroll down the page).

Step 5: Click on it, and it will start downloading. You can click on “Open folder” or let it open automatically when the download is finished. When the download finishes, you can play it with any audio player that supports mp3 files.

4. SoundBible

This website offers free sound effects that can be downloaded and used in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. There is a free option and a premium option. Here is how to use SoundBible for collecting sound effects.

Step 1: Open SoundBible website.

Step 2: Look for the download button, which is located in the upper right-hand corner of your screen.

Step 3: Click on it to open another drop-down menu with “Royalty” and “Free” options, click the “Free” option.

Step 4: Scroll down to the bottom of the page.

Step 5: Click “Download”.

Step 6: You will be able to download your sound effect onto your computer.

Please note: These glass-breaking sound effects are in .mp3 format and can be used freely in your video games and animated projects under the terms of the Attribution 3.0 license.

5. ZapSplat

This website offers a wide variety of sound effects that are free to download and use in your projects. The sound effects are available in WAV format and can be used for personal or commercial purposes.

Step 1: Go to Zapslat website, click on ZapSplat.

Step 2: Type the name of your project, then go to the search tab and find your project.

Step 3: When the video has finished importing, you can change the playback speed and add effects.

Step 4: To export your project, click on the share button and select “Download”. You can then save your video to your computer.

Part 2 Use Filmora to Add Background Music in Your Video

Filmora is an easy video editing software that is easy to use and has a wide range of features. It is available for both Windows and Mac users. Some of the features of Filmora include adding text, music, and filters to your videos. You can also create slideshows, animated titles, and green screen effects. Filmora has a glass-breaking effect. This can be added to your video to give it a dramatic ending or a thrilling start. It can signify the end of a relationship or other momentous occasion. You can choose from different types of glass-breaking sound effects, like champagne glasses clinking together, breaking glass, or the sound of a window shattering.

Features:

• The software features a manual mode for advanced control over the video editing process and express mode for quick and easy creation of videos. It also supports 4K video editing.
• One of the program’s most distinctive features is the glass-breaking sound effect. When a clip is edited and played back, this sound can be heard whenever the clip is paused or stopped. This effect was added to make the editing process more realistic.
• Another distinctive feature of Filmora is the glass shutter sound effect. This sound can be heard when a clip is edited and played back. It was added to make the editing process more realistic and enhance the user’s experience.
• If you are looking for video editing software that offers a realistic editing experience, Filmora is the right choice for you. It features two unique sound effects that add a touch of realism and make the editing process more exciting.
  Some features include adding text, music, and audio effects and creating titles and intro/outros.

Step by Step Guide for How to Add Sound Effects to Video With Filmora:

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Glass-breaking sound effects are a great way to give your video or project some real, dramatic flair. These sounds for free online. Do an internet search, and you’ll come up with plenty of sites that offer them as downloads. Note that not all of those websites will be completely free; those that only provide their glass-breaking sounds for certain uses may charge a fee after using it more than a certain number of times.

Filmora is a video editing program that’s simple enough for beginners but powerful enough to satisfy even the most advanced editors. With features like manual mode and glass-breaking sound effects, you can easily create videos. Hope this article helps you with collecting glass breaking/shattering sound effects and adding them into videos using Filmora.

Try It Free Try It Free

There are a few different places where you can find glass-breaking sound effects. One place is online, on websites like SoundCloud or YouTube. Many apps offer glass-breaking sound effects as part of their library of sounds. A quick internet search will reveal various sites to download these effects for free.

Keep in mind that not all of these sites are completely free. Some of them will only offer free glass-breaking sound effects for certain uses, while others may limit how many times you can use their sounds before charging a fee.

You can also find glass-breaking sounds in libraries of sound effects. These collections are available for purchase, or they may be available to download for free. If you are looking for a specific sound effect, it is often easiest to search for it by name. This will help you to find the right sound effect quickly and easily.

Finally, if you have access to a recording studio, you can record the sound yourself. In this article, we are going to help you with the whole matter with step by step guide. So read on to know more!

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Background Music in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Among many ways to download or create all kinds of sound effect including glass breaking/shattering sound effect, here are some of the ways for you to follow –

1. Freesound

This site has thousands of sound effects available under the Creative Commons 0 license. This means that they can be used for any purpose, personal or commercial, without attribution or permission required. To download music from Freesound, follow these steps.

Step 1: Go to the Freesound website.

Step 2: Search for the sound you want to download.

Step 3: Click on the sound to listen to it.

Step 4: Click on the Download button.

Step 5: Save the sound to your computer.

2. Incompetech

This site offers royalty-free music and sound effects used in a commercial or non-commercial project. All of the sounds are available for download in MP3 format.

Step 1: First of all, go to Incompetech and open up any page on the site. You’ll see that there are links on the left side.

Step 2: Click on one of those links, and you’ll see a list of songs of that category. Once again, click on one of the songs to open up another page where you can listen to it.

Step 3: Once you’re done listening, scroll down, and you’ll see a link that says “Download this song”. Click on the link, and it will start downloading automatically.

Step 4: Once downloaded, go into your project and put in the music track where you want the song to go in. If you want a song to be longer, re-download the song and find that “Download this song” link again. Put it where you want the new end of the music to be.

3. Orange Free Sounds

This site offers various sound effects that are free to download and use in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. Here is how to download a video from orange free sounds step by step.

Step 1: Go to the URL of the video. The URL is the address of the video that you want to download. Copy it and paste it in a new tab or window if your browser doesn’t automatically do it for you.

Step 2: The next step is to go to a website called SaveFrom.net. When the page has loaded, look for the big blue button that says “Download Video”. A new tab or window will open with the download page. It would be best to paste the video URL in the “Enter a video URL” bar.

Step 3: After pasting it, click on “Download this video” (the blue button). When it appears, press on one of them. I usually go for mp3 format because it keeps good quality and it’s the most used format that you can play on many devices.

Step 4: The next step is to wait until it downloads. Depending on your connection speed, it may take a few minutes, but it usually doesn’t even take one minute to download 100Mb videos. When it has finished downloading, look for the green button that says “Download to your computer” (you may have to scroll down the page).

Step 5: Click on it, and it will start downloading. You can click on “Open folder” or let it open automatically when the download is finished. When the download finishes, you can play it with any audio player that supports mp3 files.

4. SoundBible

This website offers free sound effects that can be downloaded and used in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. There is a free option and a premium option. Here is how to use SoundBible for collecting sound effects.

Step 1: Open SoundBible website.

Step 2: Look for the download button, which is located in the upper right-hand corner of your screen.

Step 3: Click on it to open another drop-down menu with “Royalty” and “Free” options, click the “Free” option.

Step 4: Scroll down to the bottom of the page.

Step 5: Click “Download”.

Step 6: You will be able to download your sound effect onto your computer.

Please note: These glass-breaking sound effects are in .mp3 format and can be used freely in your video games and animated projects under the terms of the Attribution 3.0 license.

5. ZapSplat

This website offers a wide variety of sound effects that are free to download and use in your projects. The sound effects are available in WAV format and can be used for personal or commercial purposes.

Step 1: Go to Zapslat website, click on ZapSplat.

Step 2: Type the name of your project, then go to the search tab and find your project.

Step 3: When the video has finished importing, you can change the playback speed and add effects.

Step 4: To export your project, click on the share button and select “Download”. You can then save your video to your computer.

Part 2 Use Filmora to Add Background Music in Your Video

Filmora is an easy video editing software that is easy to use and has a wide range of features. It is available for both Windows and Mac users. Some of the features of Filmora include adding text, music, and filters to your videos. You can also create slideshows, animated titles, and green screen effects. Filmora has a glass-breaking effect. This can be added to your video to give it a dramatic ending or a thrilling start. It can signify the end of a relationship or other momentous occasion. You can choose from different types of glass-breaking sound effects, like champagne glasses clinking together, breaking glass, or the sound of a window shattering.

Features:

• The software features a manual mode for advanced control over the video editing process and express mode for quick and easy creation of videos. It also supports 4K video editing.
• One of the program’s most distinctive features is the glass-breaking sound effect. When a clip is edited and played back, this sound can be heard whenever the clip is paused or stopped. This effect was added to make the editing process more realistic.
• Another distinctive feature of Filmora is the glass shutter sound effect. This sound can be heard when a clip is edited and played back. It was added to make the editing process more realistic and enhance the user’s experience.
• If you are looking for video editing software that offers a realistic editing experience, Filmora is the right choice for you. It features two unique sound effects that add a touch of realism and make the editing process more exciting.
  Some features include adding text, music, and audio effects and creating titles and intro/outros.

Step by Step Guide for How to Add Sound Effects to Video With Filmora:

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Glass-breaking sound effects are a great way to give your video or project some real, dramatic flair. These sounds for free online. Do an internet search, and you’ll come up with plenty of sites that offer them as downloads. Note that not all of those websites will be completely free; those that only provide their glass-breaking sounds for certain uses may charge a fee after using it more than a certain number of times.

Filmora is a video editing program that’s simple enough for beginners but powerful enough to satisfy even the most advanced editors. With features like manual mode and glass-breaking sound effects, you can easily create videos. Hope this article helps you with collecting glass breaking/shattering sound effects and adding them into videos using Filmora.

Try It Free Try It Free

There are a few different places where you can find glass-breaking sound effects. One place is online, on websites like SoundCloud or YouTube. Many apps offer glass-breaking sound effects as part of their library of sounds. A quick internet search will reveal various sites to download these effects for free.

Keep in mind that not all of these sites are completely free. Some of them will only offer free glass-breaking sound effects for certain uses, while others may limit how many times you can use their sounds before charging a fee.

You can also find glass-breaking sounds in libraries of sound effects. These collections are available for purchase, or they may be available to download for free. If you are looking for a specific sound effect, it is often easiest to search for it by name. This will help you to find the right sound effect quickly and easily.

Finally, if you have access to a recording studio, you can record the sound yourself. In this article, we are going to help you with the whole matter with step by step guide. So read on to know more!

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Background Music in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Among many ways to download or create all kinds of sound effect including glass breaking/shattering sound effect, here are some of the ways for you to follow –

1. Freesound

This site has thousands of sound effects available under the Creative Commons 0 license. This means that they can be used for any purpose, personal or commercial, without attribution or permission required. To download music from Freesound, follow these steps.

Step 1: Go to the Freesound website.

Step 2: Search for the sound you want to download.

Step 3: Click on the sound to listen to it.

Step 4: Click on the Download button.

Step 5: Save the sound to your computer.

2. Incompetech

This site offers royalty-free music and sound effects used in a commercial or non-commercial project. All of the sounds are available for download in MP3 format.

Step 1: First of all, go to Incompetech and open up any page on the site. You’ll see that there are links on the left side.

Step 2: Click on one of those links, and you’ll see a list of songs of that category. Once again, click on one of the songs to open up another page where you can listen to it.

Step 3: Once you’re done listening, scroll down, and you’ll see a link that says “Download this song”. Click on the link, and it will start downloading automatically.

Step 4: Once downloaded, go into your project and put in the music track where you want the song to go in. If you want a song to be longer, re-download the song and find that “Download this song” link again. Put it where you want the new end of the music to be.

3. Orange Free Sounds

This site offers various sound effects that are free to download and use in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. Here is how to download a video from orange free sounds step by step.

Step 1: Go to the URL of the video. The URL is the address of the video that you want to download. Copy it and paste it in a new tab or window if your browser doesn’t automatically do it for you.

Step 2: The next step is to go to a website called SaveFrom.net. When the page has loaded, look for the big blue button that says “Download Video”. A new tab or window will open with the download page. It would be best to paste the video URL in the “Enter a video URL” bar.

Step 3: After pasting it, click on “Download this video” (the blue button). When it appears, press on one of them. I usually go for mp3 format because it keeps good quality and it’s the most used format that you can play on many devices.

Step 4: The next step is to wait until it downloads. Depending on your connection speed, it may take a few minutes, but it usually doesn’t even take one minute to download 100Mb videos. When it has finished downloading, look for the green button that says “Download to your computer” (you may have to scroll down the page).

Step 5: Click on it, and it will start downloading. You can click on “Open folder” or let it open automatically when the download is finished. When the download finishes, you can play it with any audio player that supports mp3 files.

4. SoundBible

This website offers free sound effects that can be downloaded and used in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. There is a free option and a premium option. Here is how to use SoundBible for collecting sound effects.

Step 1: Open SoundBible website.

Step 2: Look for the download button, which is located in the upper right-hand corner of your screen.

Step 3: Click on it to open another drop-down menu with “Royalty” and “Free” options, click the “Free” option.

Step 4: Scroll down to the bottom of the page.

Step 5: Click “Download”.

Step 6: You will be able to download your sound effect onto your computer.

Please note: These glass-breaking sound effects are in .mp3 format and can be used freely in your video games and animated projects under the terms of the Attribution 3.0 license.

5. ZapSplat

This website offers a wide variety of sound effects that are free to download and use in your projects. The sound effects are available in WAV format and can be used for personal or commercial purposes.

Step 1: Go to Zapslat website, click on ZapSplat.

Step 2: Type the name of your project, then go to the search tab and find your project.

Step 3: When the video has finished importing, you can change the playback speed and add effects.

Step 4: To export your project, click on the share button and select “Download”. You can then save your video to your computer.

Part 2 Use Filmora to Add Background Music in Your Video

Filmora is an easy video editing software that is easy to use and has a wide range of features. It is available for both Windows and Mac users. Some of the features of Filmora include adding text, music, and filters to your videos. You can also create slideshows, animated titles, and green screen effects. Filmora has a glass-breaking effect. This can be added to your video to give it a dramatic ending or a thrilling start. It can signify the end of a relationship or other momentous occasion. You can choose from different types of glass-breaking sound effects, like champagne glasses clinking together, breaking glass, or the sound of a window shattering.

Features:

• The software features a manual mode for advanced control over the video editing process and express mode for quick and easy creation of videos. It also supports 4K video editing.
• One of the program’s most distinctive features is the glass-breaking sound effect. When a clip is edited and played back, this sound can be heard whenever the clip is paused or stopped. This effect was added to make the editing process more realistic.
• Another distinctive feature of Filmora is the glass shutter sound effect. This sound can be heard when a clip is edited and played back. It was added to make the editing process more realistic and enhance the user’s experience.
• If you are looking for video editing software that offers a realistic editing experience, Filmora is the right choice for you. It features two unique sound effects that add a touch of realism and make the editing process more exciting.
  Some features include adding text, music, and audio effects and creating titles and intro/outros.

Step by Step Guide for How to Add Sound Effects to Video With Filmora:

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Glass-breaking sound effects are a great way to give your video or project some real, dramatic flair. These sounds for free online. Do an internet search, and you’ll come up with plenty of sites that offer them as downloads. Note that not all of those websites will be completely free; those that only provide their glass-breaking sounds for certain uses may charge a fee after using it more than a certain number of times.

Filmora is a video editing program that’s simple enough for beginners but powerful enough to satisfy even the most advanced editors. With features like manual mode and glass-breaking sound effects, you can easily create videos. Hope this article helps you with collecting glass breaking/shattering sound effects and adding them into videos using Filmora.

Try It Free Try It Free

There are a few different places where you can find glass-breaking sound effects. One place is online, on websites like SoundCloud or YouTube. Many apps offer glass-breaking sound effects as part of their library of sounds. A quick internet search will reveal various sites to download these effects for free.

Keep in mind that not all of these sites are completely free. Some of them will only offer free glass-breaking sound effects for certain uses, while others may limit how many times you can use their sounds before charging a fee.

You can also find glass-breaking sounds in libraries of sound effects. These collections are available for purchase, or they may be available to download for free. If you are looking for a specific sound effect, it is often easiest to search for it by name. This will help you to find the right sound effect quickly and easily.

Finally, if you have access to a recording studio, you can record the sound yourself. In this article, we are going to help you with the whole matter with step by step guide. So read on to know more!

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Background Music in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Among many ways to download or create all kinds of sound effect including glass breaking/shattering sound effect, here are some of the ways for you to follow –

1. Freesound

This site has thousands of sound effects available under the Creative Commons 0 license. This means that they can be used for any purpose, personal or commercial, without attribution or permission required. To download music from Freesound, follow these steps.

Step 1: Go to the Freesound website.

Step 2: Search for the sound you want to download.

Step 3: Click on the sound to listen to it.

Step 4: Click on the Download button.

Step 5: Save the sound to your computer.

2. Incompetech

This site offers royalty-free music and sound effects used in a commercial or non-commercial project. All of the sounds are available for download in MP3 format.

Step 1: First of all, go to Incompetech and open up any page on the site. You’ll see that there are links on the left side.

Step 2: Click on one of those links, and you’ll see a list of songs of that category. Once again, click on one of the songs to open up another page where you can listen to it.

Step 3: Once you’re done listening, scroll down, and you’ll see a link that says “Download this song”. Click on the link, and it will start downloading automatically.

Step 4: Once downloaded, go into your project and put in the music track where you want the song to go in. If you want a song to be longer, re-download the song and find that “Download this song” link again. Put it where you want the new end of the music to be.

3. Orange Free Sounds

This site offers various sound effects that are free to download and use in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. Here is how to download a video from orange free sounds step by step.

Step 1: Go to the URL of the video. The URL is the address of the video that you want to download. Copy it and paste it in a new tab or window if your browser doesn’t automatically do it for you.

Step 2: The next step is to go to a website called SaveFrom.net. When the page has loaded, look for the big blue button that says “Download Video”. A new tab or window will open with the download page. It would be best to paste the video URL in the “Enter a video URL” bar.

Step 3: After pasting it, click on “Download this video” (the blue button). When it appears, press on one of them. I usually go for mp3 format because it keeps good quality and it’s the most used format that you can play on many devices.

Step 4: The next step is to wait until it downloads. Depending on your connection speed, it may take a few minutes, but it usually doesn’t even take one minute to download 100Mb videos. When it has finished downloading, look for the green button that says “Download to your computer” (you may have to scroll down the page).

Step 5: Click on it, and it will start downloading. You can click on “Open folder” or let it open automatically when the download is finished. When the download finishes, you can play it with any audio player that supports mp3 files.

4. SoundBible

This website offers free sound effects that can be downloaded and used in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. There is a free option and a premium option. Here is how to use SoundBible for collecting sound effects.

Step 1: Open SoundBible website.

Step 2: Look for the download button, which is located in the upper right-hand corner of your screen.

Step 3: Click on it to open another drop-down menu with “Royalty” and “Free” options, click the “Free” option.

Step 4: Scroll down to the bottom of the page.

Step 5: Click “Download”.

Step 6: You will be able to download your sound effect onto your computer.

Please note: These glass-breaking sound effects are in .mp3 format and can be used freely in your video games and animated projects under the terms of the Attribution 3.0 license.

5. ZapSplat

This website offers a wide variety of sound effects that are free to download and use in your projects. The sound effects are available in WAV format and can be used for personal or commercial purposes.

Step 1: Go to Zapslat website, click on ZapSplat.

Step 2: Type the name of your project, then go to the search tab and find your project.

Step 3: When the video has finished importing, you can change the playback speed and add effects.

Step 4: To export your project, click on the share button and select “Download”. You can then save your video to your computer.

Part 2 Use Filmora to Add Background Music in Your Video

Filmora is an easy video editing software that is easy to use and has a wide range of features. It is available for both Windows and Mac users. Some of the features of Filmora include adding text, music, and filters to your videos. You can also create slideshows, animated titles, and green screen effects. Filmora has a glass-breaking effect. This can be added to your video to give it a dramatic ending or a thrilling start. It can signify the end of a relationship or other momentous occasion. You can choose from different types of glass-breaking sound effects, like champagne glasses clinking together, breaking glass, or the sound of a window shattering.

Features:

• The software features a manual mode for advanced control over the video editing process and express mode for quick and easy creation of videos. It also supports 4K video editing.
• One of the program’s most distinctive features is the glass-breaking sound effect. When a clip is edited and played back, this sound can be heard whenever the clip is paused or stopped. This effect was added to make the editing process more realistic.
• Another distinctive feature of Filmora is the glass shutter sound effect. This sound can be heard when a clip is edited and played back. It was added to make the editing process more realistic and enhance the user’s experience.
• If you are looking for video editing software that offers a realistic editing experience, Filmora is the right choice for you. It features two unique sound effects that add a touch of realism and make the editing process more exciting.
  Some features include adding text, music, and audio effects and creating titles and intro/outros.

Step by Step Guide for How to Add Sound Effects to Video With Filmora:

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Glass-breaking sound effects are a great way to give your video or project some real, dramatic flair. These sounds for free online. Do an internet search, and you’ll come up with plenty of sites that offer them as downloads. Note that not all of those websites will be completely free; those that only provide their glass-breaking sounds for certain uses may charge a fee after using it more than a certain number of times.

Filmora is a video editing program that’s simple enough for beginners but powerful enough to satisfy even the most advanced editors. With features like manual mode and glass-breaking sound effects, you can easily create videos. Hope this article helps you with collecting glass breaking/shattering sound effects and adding them into videos using Filmora.

Also read: