How to Remove Hiss From Audio: Tips and Tricks

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

**Part 3. Remove Hiss from Audio with Wondershare Filmora

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

**Part 3. Remove Hiss from Audio with Wondershare Filmora

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Click here

Cutting-Edge Techniques for Pitch Modification in Audacity: Keeping the Sound Crisp

You may raise or lower the pitch of a pre-recorded song. Likewise, you may apply the pitch-changing effect in real-time sound recording. Change in pitch affects your noise in certain ways. For instance, it can help you sound younger. Similarly, it can convert the male voice into a female voice. Another notable use of the pitch-changing technique is that you can produce sounds like cartoons. So, changing pitch can add a unique touch to your voice. You can also change pitch when recording in Audacity. The following article covers details about the Audacity change pitch feature. Let’s get started.

In this article

01 What is pitch, and how does it work?

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

Deep Dive Into the Technological Framework of Sound Forge

In the music industry, the audio content version has changed drastically. As a result, music production and marketing are growing faster than ever, and only those with proper, updated tools and skills are capable of surviving in this era.

Audio editing tools are in demand for different purposes, such as adding effects to audio and removing pauses from a webinar session. Choosing an audio editor depends on many factors, such as price range, the purpose of using an editor, and skill level. The best editing program can help you get the best audio finishing - MAGIX Sound Forge.

If you are new to the music industry or a professional searching for an audio editor, this article will help you learn everything about Sound Forge.

Part 1. A Quick Verdict of Sound Forge

Sound Forge is one of the best software for professionals, beginners, and enthusiasts due to its simple and essential restoration tools that can help remove unnecessary background noises. However, this music software can remove 70% of the noise, leaving some cracks and pops, but still, users get a lot of improvement in the audio quality.

You can record and extract audio from video files. The customizable toolbars, interfaces, and a wide variety of presets give you a complete audio editing experience with Sound Forge.

The only drawback is that the software cannot handle multiple audio files and plugin effects together in the free version, making it useless for batch processing. However, you can get these features in the paid version.

Part 2. What is Sound Forge?

Sound Forge is an audio editor for newbies and professionals and has two versions, i.e., Sound Forge pro 12 and Sound Forge Audio Studio 13, released in April 2018 and January 2019, respectively. Although the software was developed in the US, MAGIX is doing further developments, so you get American originality and German modifications in one program.

The innovative features such as fast and powerful processing, editing, and workflow are why many producers, including Grammy winners, have chosen this tool globally for the past 20 years.

MAGIX has developed the latest version of this software, Sound Forge Pro 16 suite , setting new audio quality standards with advanced plug-ins.

Part 3. MAGIX Sound Forge 16 Review

Now that you know about Sound Forge and its origin, let’s review the software regarding price, features, and user ratings.

How much does Sound Forge cost?

Sound Forge is a paid software but excellent value for money and offers a wide range of features and plug-ins that make audio editing fun and easy.

The different versions are available at different pricing, and monthly or yearly subscriptions are also available.

Sound Forge Audio Studio 365 is available at 3-5$ per month per year with a starting price of 60$. Sound Forge Pro is available for 279$, Sound Forge Pro Suite for 399$, Sound Forge Pro 365 for 14.99$ per month, and Sound Forge Pro Suite 365 for 19.99$ per month.

Innovative features of Sound Forge

Here are some unique Sound Forge features that make it ideal for audio editing needs.

• Professional and Comprehensive audio editing: The improved workflow of the software allows you to edit, splice, and adjust audio files with just a few clicks and deliver a professional audio finish as precisely as you want.
• Audio restoration: Sound Forge restores vinyl and tapes into digital audio such as CDs, transforming outdated sound into exceptional studio quality. However, you need to have a vinyl converter turntable for this purpose.The Audio Studio version lacks the audio restoration plugins that the Pro Studio version offer.
• Recording any sound up to 32-bit/384 kHz: With Sound Forge, you can record podcasts, singing, webinars, and do a voice-over up to 32-bit/384 kHz and view the process with a live waveform display and real-time monitoring.
• Effects and effects presets: Sound Forge provide 11 DirectX audio effects and 90 effects preset to get the right sound for you. Furthermore, the software can let you preview the effects before applying them to your audio recordings.
• Import and export audio file: You can import or export any audio file into standard (MP3, FLAC, WAV, RAW, ASF, CDA, AIFF, VOX, OGG, MUS, and W64) formats with Sound Forge Audio Studio 16.

Score on G2

The overall G2 (a famous software review website) rating of Sound Forge is 4.3 out of 5. Users rated the software on the G2 platform as:

• 4 for “Ease of use
• 4 for “Quality Support
• 9 for “Ease of Setup

To help you have a better overview of MAGIX Sound Forge 16, we have prepared a review video below.

Video - New Features and Workflows of MAGIX Sound Forge 16

Part 4. Pros and Cons of MAGIX Sound Forge

Below are some Sound Forge pros and cons to help you make a quick decision about the software.

Pros of Sound Forge

• User-friendly: The top-notch software comes with a user-friendly interface, making it easy to learn and simple to control for beginners in the audio editing field.
• Compatibility: The high-quality audio software solution is available for both Windows and Mac operating systems.
• Customizable software: Sound Forge is the most customizable software, offering customization of toolbars to get the exact tools you need and letting you change audio editing windows arrangement.
• Support VST plugin: Sound Forge supports the VST plugin that is used to integrate software audio effects and effect plugins to help you create a more compelling final product.

Cons of Sound Forge

• No Batch Processing: one main drawback of Sound Forge is that it cannot do batch processing, making it useless to process multiple audio files and plug-ins together.
• Noise reduction/ Noise cancellation: The software does not do much for noise reduction; its “Noise Gate Technology” distort the recording instead of filtering the noise.

Part 5. MAGIX Sound Forge vs. Audacity

Both Sound Forge and Audacity are audio editing and mixing software. By comparing their features, you can get an idea to which one to use for your audio editing projects.

What is Audacity?

Audacity is free and open-source software developed by Dominic Mazzoni and Roger Dannenberg and released on May 28, 2000. In April 2021, Muse group acquired the Audacity trademark but kept the application free and open source.

Audacity offers a great variety of features, such as a playback/record tool, editing options, and a wide range of effects that help professionals to adjust soundtracks, import and export audio files in any standard format, and analyze sound frequencies.

Comparing Sound Forge and Audacity

Features	Sound Forge	Audacity
Price/ Value for money	4.7/5	4.5/5
Compatibility	Windows and Mac	Windows and Mac
Ease of Use	8.4/10	8.4/10
Advanced Features	DynamicEQLoudness visualizationOptimized multichannel workflow	Multiple tracksAuto audio duckingBackground noise removalAudio filters
Scores on G2	4.3/5	4.5/5

Our Recommendations

Due to the advanced features and high scores on G2, we recommend using Audacity. However, other factors always come into play as the audio editing demands and needs change with time. So, Sound Forge can be a good option for you as a nomad in the music editing industry.

Most companies (with 50-200 employees and 1M-10M revenue) and the higher education industry in the United States are using Sound Forge.

On the other hand, businesses often use Audacity for marketing purposes, such as making Podcasts. The software can record audio for PowerPoint presentations to help visually impaired employees.

Conclusion

In this article, we’ve introduced Sound Forge, its price, the software’s features, and what the users think about it. Later in the guide, we compared Sound Forge with one of the leading music editors, Audacity, and learned how they stack up against each other.

Hopefully, you can now decide better about choosing a music editing software for your audio recording and editing needs.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 4. Pros and Cons of MAGIX Sound Forge

Below are some Sound Forge pros and cons to help you make a quick decision about the software.

Pros of Sound Forge

• User-friendly: The top-notch software comes with a user-friendly interface, making it easy to learn and simple to control for beginners in the audio editing field.
• Compatibility: The high-quality audio software solution is available for both Windows and Mac operating systems.
• Customizable software: Sound Forge is the most customizable software, offering customization of toolbars to get the exact tools you need and letting you change audio editing windows arrangement.
• Support VST plugin: Sound Forge supports the VST plugin that is used to integrate software audio effects and effect plugins to help you create a more compelling final product.

Cons of Sound Forge

• No Batch Processing: one main drawback of Sound Forge is that it cannot do batch processing, making it useless to process multiple audio files and plug-ins together.
• Noise reduction/ Noise cancellation: The software does not do much for noise reduction; its “Noise Gate Technology” distort the recording instead of filtering the noise.

Part 5. MAGIX Sound Forge vs. Audacity

Both Sound Forge and Audacity are audio editing and mixing software. By comparing their features, you can get an idea to which one to use for your audio editing projects.

What is Audacity?

Audacity is free and open-source software developed by Dominic Mazzoni and Roger Dannenberg and released on May 28, 2000. In April 2021, Muse group acquired the Audacity trademark but kept the application free and open source.

Audacity offers a great variety of features, such as a playback/record tool, editing options, and a wide range of effects that help professionals to adjust soundtracks, import and export audio files in any standard format, and analyze sound frequencies.

Comparing Sound Forge and Audacity

Features	Sound Forge	Audacity
Price/ Value for money	4.7/5	4.5/5
Compatibility	Windows and Mac	Windows and Mac
Ease of Use	8.4/10	8.4/10
Advanced Features	DynamicEQLoudness visualizationOptimized multichannel workflow	Multiple tracksAuto audio duckingBackground noise removalAudio filters
Scores on G2	4.3/5	4.5/5

Our Recommendations

Due to the advanced features and high scores on G2, we recommend using Audacity. However, other factors always come into play as the audio editing demands and needs change with time. So, Sound Forge can be a good option for you as a nomad in the music editing industry.

Most companies (with 50-200 employees and 1M-10M revenue) and the higher education industry in the United States are using Sound Forge.

On the other hand, businesses often use Audacity for marketing purposes, such as making Podcasts. The software can record audio for PowerPoint presentations to help visually impaired employees.

Conclusion

In this article, we’ve introduced Sound Forge, its price, the software’s features, and what the users think about it. Later in the guide, we compared Sound Forge with one of the leading music editors, Audacity, and learned how they stack up against each other.

Hopefully, you can now decide better about choosing a music editing software for your audio recording and editing needs.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Also read: