Enhancing Audio Quality: Practical Methods to Eradicate Low-Frequency Rumble

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

The Triumvirate of Premium MP3 Sound Enhancement Services Online

No matter how high-end your speakers are, there are certain audio files you will come across that sound uncomfortably low. Even when you put the volume at its peak, the sound seems to be dampened for those audio files. For example, if you have an old music file, you will find it sound lower in comparison to a modern music file. That is when you will need an MP3 volume booster that can be highly useful. You can boost the volume of the audio file so that the music as well as the voice becomes prominent.

Such an MP3 audio booster is useful for podcasters, music producers, and voiceover recorders. If you want to boost audio for a few files, you can opt for an online tool. But if you are making a professional video where you need to boost the audio, we recommend a professional video editor with audio booster. Here is the list of the top 3 MP3 volume booster online that you can use on your computer as well as smartphone.

Filmora Audio Editor

Edit system and microphone audio seperately

One click to match your sound with your video

Automatically lower the volume of one track to make another track clearer

Try It Free Try It Free

1. FileConverto Boost MP3 Volume

FileConverto has the most popular mp3 volume booster online tool. This is because FileConverto has all the different tools to modify audio and video files in one place. You have to opt for Boost MP3 Volume tool to enhance the volume of your audio file. You can not only increase the volume but also decrease the volume as per your requirements. Most importantly, you can select decibel of increment or decrement. Moreover, you can select the audio channel whose volume you want to boost. Here are the key features of File Boost MP3 Volume tool.

• Allows uploading audio files of up to 150 MB.
• Option to choose decibel value as per requirement.
• Select audio channel for boosting volume.
• Increase as well as decrease volume.
• Easy user interface and quick boosting process.

How to boost audio volume with FileConverto?

Step 1: You need to visit “fileconverto.com/boost-mp3-volume” from your web browser.

Step 2: You need to click on Browse button and select the MP3 file whose volume you want to boost.

Step 3: You will have to select Increase Volume option from Select Action.

Step 4: Select the decibel value by which you want the increment.

Step 5: Select the appropriate audio channel(s) for the boost.

Step 6: Click on ‘Submit Now’ for the file to get uploaded and volume to get boosted.

Once completed, you can select the file name and download it.

2. Audio Alter Volume Changer

Audio Alter is a versatile online tool through which you can boost the volume of your audio files. The platform supports not just MP3 files but also WAV, FLAC, and OGG audio files. Therefore, it has become a preferred destination for the concerned users. You can increase or decrease volume using decibel slider. Moreover, you can listen to the modified audio file before downloading to ensure that you have the correct volume level. Here are all the key features of Audio Alter Volume Changer.

• Drag and drop files directly.
• Supports multiple file formats.
• Allows uploading audio file up to 50 MB.
• Raise or lower volume as required.
• Live preview of modifications before downloading.
• Various presets available on bass boost.

How to boost sound online with Audio Alter?

Step 1: On your web browser, you need to navigate to audioalter.com/volume

Step 2: Add your file by clicking on Browse Computer. You can even drag and drop the file on the user interface.

Step 3: Now you can use the slider and select the dB value. You can click on Play button for live preview.

Step 4: Click on Submit button to make the changes in your audio file. Once done, you can download the file.

3. Online Converter MP3 Audio Booster

This is another simple but effective online tool to boost the volume of any MP3 audio file. The best part is that you can upload an MP3 file of size 200 MB which is the largest among all online tools. You should keep in mind that the platform supports only MP3 files. You can increase as well as decrease the volume of your audio file. Besides, you can select the percentage or the decibel by which you the appreciation or depression on the audio volume. Here are the key features of Online Converter MP3 volume booster.

• Allows boost by decibel or percentage.
• Maximum upload file size of 200 MB.
• Allows increase or decreasing volume.
• Various other audio file based tools available.

How to boost audio volume with Online Converter?

Step 1: You will have visit “www.onlineconverter.com/increase-mp3-volume“ from your web browser.

Step 2: Click on Choose File button to upload MP3 file whose volume you want to boost.

Step 3: Select the Volume boost percentage or decibel as per your preference.

Step 4: Finally, click on Convert button for its volume to get boosted as per selected parameters.

Bonus: Boost Volume Of Any Audio File With A Professional Software

You can see that all these online audio booster tools have certain limitations. First of all, there is a limitation of file size. Secondly, you have to waste your internet data to upload and download files. At times, the uploading gets stuck which could be annoying. Besides, you cannot edit different aspects of audio to enhance the overall pleasantness of the audio. That is where a professional audio editor can be useful.

We recommend Wondershare Filmora where you can edit audio and video as per requirement. The software supports various types of audio files instead of just MP3 files. You can combine and sync audio and video and edit all the different aspects of audio as per requirement. Here are the steps to boost audio volume using Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Open Filmora and go to File > Import Media > Import Media Files option.

Step 3: From your hard drive select the audio file whose volume you want to boost.

Step 4: Thereafter, drag the audio file on the timeline and right-click on it to select Adjust Audio option.

Step 5: You can adjust the volume on the left side of the screen as well as tweak with other available parameters.

Step 6: Click on Export button and save the file to your hard drive.

Conclusion –

Boosting the volume of an MP3 audio file is no more an esoteric task. You do not need to download any software as there are mp3 volume booster online tools available to get the job done perfectly. Starting from boosting the background music to increasing and decreasing voice, you can modify MP3 as well as other audio files. If you are looking for a professional software to tweak various aspects of audio, we recommend Wondershare Filmora.

Try It Free Try It Free

1. FileConverto Boost MP3 Volume

FileConverto has the most popular mp3 volume booster online tool. This is because FileConverto has all the different tools to modify audio and video files in one place. You have to opt for Boost MP3 Volume tool to enhance the volume of your audio file. You can not only increase the volume but also decrease the volume as per your requirements. Most importantly, you can select decibel of increment or decrement. Moreover, you can select the audio channel whose volume you want to boost. Here are the key features of File Boost MP3 Volume tool.

• Allows uploading audio files of up to 150 MB.
• Option to choose decibel value as per requirement.
• Select audio channel for boosting volume.
• Increase as well as decrease volume.
• Easy user interface and quick boosting process.

How to boost audio volume with FileConverto?

Step 1: You need to visit “fileconverto.com/boost-mp3-volume” from your web browser.

Step 2: You need to click on Browse button and select the MP3 file whose volume you want to boost.

Step 3: You will have to select Increase Volume option from Select Action.

Step 4: Select the decibel value by which you want the increment.

Step 5: Select the appropriate audio channel(s) for the boost.

Step 6: Click on ‘Submit Now’ for the file to get uploaded and volume to get boosted.

Once completed, you can select the file name and download it.

2. Audio Alter Volume Changer

Audio Alter is a versatile online tool through which you can boost the volume of your audio files. The platform supports not just MP3 files but also WAV, FLAC, and OGG audio files. Therefore, it has become a preferred destination for the concerned users. You can increase or decrease volume using decibel slider. Moreover, you can listen to the modified audio file before downloading to ensure that you have the correct volume level. Here are all the key features of Audio Alter Volume Changer.

• Drag and drop files directly.
• Supports multiple file formats.
• Allows uploading audio file up to 50 MB.
• Raise or lower volume as required.
• Live preview of modifications before downloading.
• Various presets available on bass boost.

How to boost sound online with Audio Alter?

Step 1: On your web browser, you need to navigate to audioalter.com/volume

Step 2: Add your file by clicking on Browse Computer. You can even drag and drop the file on the user interface.

Step 3: Now you can use the slider and select the dB value. You can click on Play button for live preview.

Step 4: Click on Submit button to make the changes in your audio file. Once done, you can download the file.

3. Online Converter MP3 Audio Booster

This is another simple but effective online tool to boost the volume of any MP3 audio file. The best part is that you can upload an MP3 file of size 200 MB which is the largest among all online tools. You should keep in mind that the platform supports only MP3 files. You can increase as well as decrease the volume of your audio file. Besides, you can select the percentage or the decibel by which you the appreciation or depression on the audio volume. Here are the key features of Online Converter MP3 volume booster.

• Allows boost by decibel or percentage.
• Maximum upload file size of 200 MB.
• Allows increase or decreasing volume.
• Various other audio file based tools available.

How to boost audio volume with Online Converter?

Step 1: You will have visit “www.onlineconverter.com/increase-mp3-volume“ from your web browser.

Step 2: Click on Choose File button to upload MP3 file whose volume you want to boost.

Step 3: Select the Volume boost percentage or decibel as per your preference.

Step 4: Finally, click on Convert button for its volume to get boosted as per selected parameters.

Bonus: Boost Volume Of Any Audio File With A Professional Software

You can see that all these online audio booster tools have certain limitations. First of all, there is a limitation of file size. Secondly, you have to waste your internet data to upload and download files. At times, the uploading gets stuck which could be annoying. Besides, you cannot edit different aspects of audio to enhance the overall pleasantness of the audio. That is where a professional audio editor can be useful.

We recommend Wondershare Filmora where you can edit audio and video as per requirement. The software supports various types of audio files instead of just MP3 files. You can combine and sync audio and video and edit all the different aspects of audio as per requirement. Here are the steps to boost audio volume using Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Open Filmora and go to File > Import Media > Import Media Files option.

Step 3: From your hard drive select the audio file whose volume you want to boost.

Step 4: Thereafter, drag the audio file on the timeline and right-click on it to select Adjust Audio option.

Step 5: You can adjust the volume on the left side of the screen as well as tweak with other available parameters.

Step 6: Click on Export button and save the file to your hard drive.

Conclusion –

Boosting the volume of an MP3 audio file is no more an esoteric task. You do not need to download any software as there are mp3 volume booster online tools available to get the job done perfectly. Starting from boosting the background music to increasing and decreasing voice, you can modify MP3 as well as other audio files. If you are looking for a professional software to tweak various aspects of audio, we recommend Wondershare Filmora.

Try It Free Try It Free

1. FileConverto Boost MP3 Volume

FileConverto has the most popular mp3 volume booster online tool. This is because FileConverto has all the different tools to modify audio and video files in one place. You have to opt for Boost MP3 Volume tool to enhance the volume of your audio file. You can not only increase the volume but also decrease the volume as per your requirements. Most importantly, you can select decibel of increment or decrement. Moreover, you can select the audio channel whose volume you want to boost. Here are the key features of File Boost MP3 Volume tool.

• Allows uploading audio files of up to 150 MB.
• Option to choose decibel value as per requirement.
• Select audio channel for boosting volume.
• Increase as well as decrease volume.
• Easy user interface and quick boosting process.

How to boost audio volume with FileConverto?

Step 1: You need to visit “fileconverto.com/boost-mp3-volume” from your web browser.

Step 2: You need to click on Browse button and select the MP3 file whose volume you want to boost.

Step 3: You will have to select Increase Volume option from Select Action.

Step 4: Select the decibel value by which you want the increment.

Step 5: Select the appropriate audio channel(s) for the boost.

Step 6: Click on ‘Submit Now’ for the file to get uploaded and volume to get boosted.

Once completed, you can select the file name and download it.

2. Audio Alter Volume Changer

Audio Alter is a versatile online tool through which you can boost the volume of your audio files. The platform supports not just MP3 files but also WAV, FLAC, and OGG audio files. Therefore, it has become a preferred destination for the concerned users. You can increase or decrease volume using decibel slider. Moreover, you can listen to the modified audio file before downloading to ensure that you have the correct volume level. Here are all the key features of Audio Alter Volume Changer.

• Drag and drop files directly.
• Supports multiple file formats.
• Allows uploading audio file up to 50 MB.
• Raise or lower volume as required.
• Live preview of modifications before downloading.
• Various presets available on bass boost.

How to boost sound online with Audio Alter?

Step 1: On your web browser, you need to navigate to audioalter.com/volume

Step 2: Add your file by clicking on Browse Computer. You can even drag and drop the file on the user interface.

Step 3: Now you can use the slider and select the dB value. You can click on Play button for live preview.

Step 4: Click on Submit button to make the changes in your audio file. Once done, you can download the file.

3. Online Converter MP3 Audio Booster

This is another simple but effective online tool to boost the volume of any MP3 audio file. The best part is that you can upload an MP3 file of size 200 MB which is the largest among all online tools. You should keep in mind that the platform supports only MP3 files. You can increase as well as decrease the volume of your audio file. Besides, you can select the percentage or the decibel by which you the appreciation or depression on the audio volume. Here are the key features of Online Converter MP3 volume booster.

• Allows boost by decibel or percentage.
• Maximum upload file size of 200 MB.
• Allows increase or decreasing volume.
• Various other audio file based tools available.

How to boost audio volume with Online Converter?

Step 1: You will have visit “www.onlineconverter.com/increase-mp3-volume“ from your web browser.

Step 2: Click on Choose File button to upload MP3 file whose volume you want to boost.

Step 3: Select the Volume boost percentage or decibel as per your preference.

Step 4: Finally, click on Convert button for its volume to get boosted as per selected parameters.

Bonus: Boost Volume Of Any Audio File With A Professional Software

You can see that all these online audio booster tools have certain limitations. First of all, there is a limitation of file size. Secondly, you have to waste your internet data to upload and download files. At times, the uploading gets stuck which could be annoying. Besides, you cannot edit different aspects of audio to enhance the overall pleasantness of the audio. That is where a professional audio editor can be useful.

We recommend Wondershare Filmora where you can edit audio and video as per requirement. The software supports various types of audio files instead of just MP3 files. You can combine and sync audio and video and edit all the different aspects of audio as per requirement. Here are the steps to boost audio volume using Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Open Filmora and go to File > Import Media > Import Media Files option.

Step 3: From your hard drive select the audio file whose volume you want to boost.

Step 4: Thereafter, drag the audio file on the timeline and right-click on it to select Adjust Audio option.

Step 5: You can adjust the volume on the left side of the screen as well as tweak with other available parameters.

Step 6: Click on Export button and save the file to your hard drive.

Conclusion –

Boosting the volume of an MP3 audio file is no more an esoteric task. You do not need to download any software as there are mp3 volume booster online tools available to get the job done perfectly. Starting from boosting the background music to increasing and decreasing voice, you can modify MP3 as well as other audio files. If you are looking for a professional software to tweak various aspects of audio, we recommend Wondershare Filmora.

Try It Free Try It Free

1. FileConverto Boost MP3 Volume

FileConverto has the most popular mp3 volume booster online tool. This is because FileConverto has all the different tools to modify audio and video files in one place. You have to opt for Boost MP3 Volume tool to enhance the volume of your audio file. You can not only increase the volume but also decrease the volume as per your requirements. Most importantly, you can select decibel of increment or decrement. Moreover, you can select the audio channel whose volume you want to boost. Here are the key features of File Boost MP3 Volume tool.

• Allows uploading audio files of up to 150 MB.
• Option to choose decibel value as per requirement.
• Select audio channel for boosting volume.
• Increase as well as decrease volume.
• Easy user interface and quick boosting process.

How to boost audio volume with FileConverto?

Step 1: You need to visit “fileconverto.com/boost-mp3-volume” from your web browser.

Step 2: You need to click on Browse button and select the MP3 file whose volume you want to boost.

Step 3: You will have to select Increase Volume option from Select Action.

Step 4: Select the decibel value by which you want the increment.

Step 5: Select the appropriate audio channel(s) for the boost.

Step 6: Click on ‘Submit Now’ for the file to get uploaded and volume to get boosted.

Once completed, you can select the file name and download it.

2. Audio Alter Volume Changer

Audio Alter is a versatile online tool through which you can boost the volume of your audio files. The platform supports not just MP3 files but also WAV, FLAC, and OGG audio files. Therefore, it has become a preferred destination for the concerned users. You can increase or decrease volume using decibel slider. Moreover, you can listen to the modified audio file before downloading to ensure that you have the correct volume level. Here are all the key features of Audio Alter Volume Changer.

• Drag and drop files directly.
• Supports multiple file formats.
• Allows uploading audio file up to 50 MB.
• Raise or lower volume as required.
• Live preview of modifications before downloading.
• Various presets available on bass boost.

How to boost sound online with Audio Alter?

Step 1: On your web browser, you need to navigate to audioalter.com/volume

Step 2: Add your file by clicking on Browse Computer. You can even drag and drop the file on the user interface.

Step 3: Now you can use the slider and select the dB value. You can click on Play button for live preview.

Step 4: Click on Submit button to make the changes in your audio file. Once done, you can download the file.

3. Online Converter MP3 Audio Booster

This is another simple but effective online tool to boost the volume of any MP3 audio file. The best part is that you can upload an MP3 file of size 200 MB which is the largest among all online tools. You should keep in mind that the platform supports only MP3 files. You can increase as well as decrease the volume of your audio file. Besides, you can select the percentage or the decibel by which you the appreciation or depression on the audio volume. Here are the key features of Online Converter MP3 volume booster.

• Allows boost by decibel or percentage.
• Maximum upload file size of 200 MB.
• Allows increase or decreasing volume.
• Various other audio file based tools available.

How to boost audio volume with Online Converter?

Step 1: You will have visit “www.onlineconverter.com/increase-mp3-volume“ from your web browser.

Step 2: Click on Choose File button to upload MP3 file whose volume you want to boost.

Step 3: Select the Volume boost percentage or decibel as per your preference.

Step 4: Finally, click on Convert button for its volume to get boosted as per selected parameters.

Bonus: Boost Volume Of Any Audio File With A Professional Software

You can see that all these online audio booster tools have certain limitations. First of all, there is a limitation of file size. Secondly, you have to waste your internet data to upload and download files. At times, the uploading gets stuck which could be annoying. Besides, you cannot edit different aspects of audio to enhance the overall pleasantness of the audio. That is where a professional audio editor can be useful.

We recommend Wondershare Filmora where you can edit audio and video as per requirement. The software supports various types of audio files instead of just MP3 files. You can combine and sync audio and video and edit all the different aspects of audio as per requirement. Here are the steps to boost audio volume using Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Open Filmora and go to File > Import Media > Import Media Files option.

Step 3: From your hard drive select the audio file whose volume you want to boost.

Step 4: Thereafter, drag the audio file on the timeline and right-click on it to select Adjust Audio option.

Step 5: You can adjust the volume on the left side of the screen as well as tweak with other available parameters.

Step 6: Click on Export button and save the file to your hard drive.

Conclusion –

Boosting the volume of an MP3 audio file is no more an esoteric task. You do not need to download any software as there are mp3 volume booster online tools available to get the job done perfectly. Starting from boosting the background music to increasing and decreasing voice, you can modify MP3 as well as other audio files. If you are looking for a professional software to tweak various aspects of audio, we recommend Wondershare Filmora.

Mastering Sound: Integrating Audio with Visuals in Film Production

How to Add Audio to Your Video (with Steps)

Shanoon Cox

Mar 27, 2024• Proven solutions

Videos are everywhere around us, to promote a brand, create an Ad, or for larger programs like movies. Only a voice-over or a clip fails to grab attention of the audience, so you got to add music to the video and make it spectacularly fascinating. By adding background music to a video, you kill its monotony and make it more appealing to touch people’s heart and evoke the response your video is intended to.

If you want to explore the numerous options to edit and add audio to videos with free audio editor , then you have come to the right spot.

Through this article, we are going to introduce you to various desktop, and phone based applications as well as free online methods to help you add audio to your videos and make them strikingly beautiful.

• Part1: How to add music to videos on Desktop
• Part2: How to add audio to video online
• Part3: How to add music to videos on Mobile Phone
• Part4: How to download royalty free music from website
• Part5: Audio editing - 5 tips for mixing audio

You may also like

15 Free Music Sites to Use (Royalty Free) >>

Part 1: How to add music to videos on Desktop

1. How to add audio to videos with for Windows 10, 8, 7

Filmora

When you need a video editing software application that comes with a brilliant built-in audio library, you can undoubtedly pick Filmora to save you.

This is a perfect application for Windows PC, which enables you to add music to video (.MP3, .WMA, or .OGG audio files to .AVI, .MP4, .MKV videos) files while allowing you to remove any existing background music from the videos as well. Its intuitive design with drag and drop features makes editing videos cake walk.

Isn’t it great when the software supports such wide varieties of audio and video formats and helps you create the most enthralling videos for you?

Explore the way it transforms your mundane videos to an exquisite piece of art, within no time. Here is the step-by-step guide for Filmora –

Step 1: Where to import audio

Install Wondershare Filmora from the official website on your computer and launch it. Once the software gets launched tap ‘MEDIA’ and then click the ‘IMPORT’ tab just below the menu bar. Now, from the drop down list click on ‘Import Media Files’ to choose the video file, and then repeat the process to pick a desired background music file.

Note: You can also use the in-built music tracks to add music to your video by selecting the ‘MUSIC’ tab.

Step 2: How to add music to timeline

Now, hover the mouse over the audio and video files you have just imported to Filmora and then tap the ‘+’ sign on it (displays ‘Add to Project’). You can also drag the media files down to the timeline.

Step 3: Edit music file

You can edit the music by double tapping the audio from the timeline. It will show you the audio panel at the top of the screen. You can the audio to fade in or fade out, manage the volume, pitch, speed, and set the desired equalizer as well.

Step 4: Export

Now that you have made the desired changes to your video, tap on the ‘EXPORT’ tab on the toolbar to export the video. The exported file can be saved in .MP4, and .WMV formats and rename, define the resolution as well.

2. How to add audio to videos on Mac

VLC

Most people have no idea that VLC is not only a media player but a video editor as well, which allows you to add music to video. This open source cross-platform multimedia player supports almost all multimedia files and various streaming protocols.

VLC step-by-step guide to add audio to video –

Step 1: Add audio file

First of all install VLC media player on your computer and launch it. Now, tap the click file tab from the menu bar at the top. After that, pick the ‘Advanced Open File’ option from the drop down menu.

Step 2: Import audio and video

You need to click the ‘Browse…’ button for importing video, and select the ‘Play another media synchronously’. Now, click the ‘Choose…’ button for importing an audio file for editing. After that, you need to click the ‘Open’ button. You also have the option for adding sub-titles to your video. Now that you have imported and merged both the audio and video files, you can also enhance the audio settings.

Step 3: Quick Tip

Tap the ‘Window’ from the top bar and click on ‘Audio Effects…’ for applying the various audio effects to your edited video.

QuickTime

QuickTime Player is the default media player for Mac computer that supports older medial formats including QTVR, MIDI files on Snow Leopard and OS X Lion, and interactive QuickTime movies.

Entering QuickTime 7 Pro registration codes, you can unlock the QuickTime Pro functions that will enable you to add music to video files. If you don’t have it on your computer, then install it and find under the ‘Utilities’ folder within the ‘Applications’ folder. Here is the step-by-step guide for QuickTime to add audio to video –

Step 1: Import the files

First of all, launch QuickTime Player and tap ‘File’ and then click ‘Open File’. Pick your desired audio file to be imported. On the subsequent window of QuickTime Player, select ‘Edit’ and then tap ‘Select All’ to import the complete audio file. Hit ‘Edit’ and tap on the ‘Copy’ option.

Step 2: Import video and add audio to QuickTime movie

Now, you need to open the desired video that you are going to add audio to. For that, you need to first open the video in QuickTime and the click ‘Edit’ and ‘Add Clip to End’.

Note: You can add a part of the audio to the video by tapping ‘Edit’ and then ‘Add to Selection and Scale’. ‘Add to Selection and Scale’ fastens or lowers down the pace of the audio track to fit with the video’s length (that you have selected to add audio to).

3. How to add audio to videos with on Linux

Mkvmerge

This software for the Linux system is broadly known for editing the Matroska Multimedia Container. The GUI of this tool is much appealing but is rather simple and basic.

The software helps you to merge the audio or video multimedia streams into one single Matroska file. Matroska acts exactly like AVI, ASF, or MP4 the common container files. The Matroska files have .MKV extension for videos which includes audio and subtitles as well, files with a .MK3D extension represent stereoscopic video, .MKS for only subtitles, and .MKA for audio-only files.

Step-by-step guide for merging audio into video: (MKV ONLY)

Step 1: Add audio to video files

Download the software and launch it on your Linux computer. From the mkvtoolnix-gui package, open the mkvmerge GUI. Click the ‘add’ button for importing the audio and video files to the software interface.

Step 2: Choose the audio track

After importing the audio and video files, select the new audio tracks by marking the check boxes against them, under the ‘Tracks, chapters and tags’ section. You can also set the language in the ‘General track options’ and delay under ‘Format specific options’ tab.

Step 3: Merge the files

Mention the output format under ‘Output filename’ section and then tap ‘Start muxing’. This process will save the video file. Using this program you can also remover tracks from a video and fix the default audio track as well.

Part 2: How to add music to videos online

Mp3Care

MP3Care is an online video editing application that people mostly use to add audio to video files. This application wipes out the existing audio track from the video file and mixes the new audio file that you upload to create an interesting video.

The supported audio input format is MP3, whereas the supported video files include MKV, FLV, AVI, MOV, MP4, and WMV. You can record a video on your mobile phone or tablet and merge a desired audio background with this using MP3Care. All you need to do is select this recorded video and a preferred audio track in this website and get going.

Steps for adding audio track to video –

Step 1: Launch the web browser and open this application, then choose the audio and video file as per the online instruction.

Step 2: After you are done with the video selection, tap ‘ADD MUSIC TO VIDEO’ and then download your edited video file.

AddAudioToVideo

AddAudioToVideo is an online application for adding music/audio to a video. MP3 audio and AVI, WMV, MOV, and MP4 video formats are only supported with this program. It replaces the MP3 audio from any video and the uploaded files get removed after a while from the web.

Step-by-step guide –

Step 1: Choose a video file

You need to first select the video file from your local drive after browsing to this site.

Step 2: Choose audio files

Select the MP3 audio file after the video file. Tap ‘Upload’ to get the files uploaded to the program and wait for some time to get them merged together.

Tip: The video file size limit is up to 500 MB.

Check out more ways of adding music to video online >>

Part 3: How to add music to videos on Mobile Phone

1. How to add audio to video on Android

Filmora

The best method to add music to video files on Android devices is none other than Filmora. A video editing app that has no time limit to edit a video and leaves no watermark on videos either is always the talk of the show.

Using the music and effects, you can indeed make hilarious funny-videos to entertain yourself and your friends. You can create videos simply by selecting pictures and videos from your phone, Instagram, or Facebook and select a theme, template, mix some music, transitions, subtitles, filters etc. and then get the video saved on your phone or shared over popular social media platforms like Facebook, Instagram, WhatsApp, Vimeo, Email, Tumblr, or YouTube.

The best part about this app is it supports multiple international languages, fits the popular ratios of Instagram and YouTube during exporting of video, allows real-time preview of clips, exports HD videos, and provides overlay elements for the best video editing experience.

Let’s go through the step-by-step guide –

Step 1: Select video and audio

Install Filmora on your Android device and launch it. Click the ‘CREATE NEW VIDEO’ over there and select the desired video. After that, tap on the ‘Add’ button found on the right side of the screen and click ‘NEXT’ on the top right part of the mobile screen.

Step 2: Add audio to video

You will be navigated to the editing interface. Click on ‘MUSIC’ from the right toolbar and then choose the desired audio after pressing plus icon. Play and confirm the audio by clicking ‘OKAY’ on the top right corner.

Step 3: Export

You can swap the music by clicking the thumbnail icon at the bottom of the screen. Save the edited video by tapping ‘Save’

KineMaster

It is a fully-featured app in Android Play store that supports numerous images, video, and text layers along with multi-track audio, precise trimming and cutting, volume envelope control, 3D transition, color LUT features and the likes.

It allows a great amount of control for an app that does editing over a mobile. Artists and educators will make use of the handwriting layers for drawing directly over the video. It supports most of the video, audio, and image formats.

Tutorial Guide for KineMaster –

Step 1: Launch KineMaster

Install and launch the app on your Android phone. Click the ‘+’ icon found in the middle of the app screen and then tap ‘Empty Project’ for a new project or ‘Project Assistant’ otherwise.

Step 2: Select media

Under the media tab, choose the desired video file and then tap ‘Background Audio’ tab. From the left panel you can choose almost 8 categories for audio.

Tips: Without tapping the plus ‘+’ icon on the music, the audio will be added to the desired video.

Step 3: Edit and export

Now, select the preferred audio track and click the share icon from the left panel. Confirm your actions by tapping ‘Export’.

Note: Voice change, looping music, or setting up the fade in/out effect is a cake walk with this app. You can also set resolution, frame rate, and bitrate using this video editing app.

2. How to add audio to video on iPhone/iPad

iMovie

If you want to add music to video in your iPhone, then the in-built iMovie option helps you import music from Theme, iTunes and your own music. Your videos will be turned into exhilarating master pieces.

You can effortlessly browse through the music files and create awesome 4K-resolution movie and Hollywood-style trailers to amaze your friends. iMovie is built to work in sync with your iOS and Mac devices.

It doesn’t matter where you are working, we mean from your iPhone to your iPad or Mac system, the project can be synced automatically as you move ahead. Once you are done editing, the movie will show up on iMovie Theatre across your iOS and Mac devices.

The step-by-step guide to add music to video using iMovie –

Step 1: On your iPhone launch the iMovie app and click ‘Project’ from the top of the screen, and tap ‘Create Project’ represented by a ‘+’ icon.

Step 2: Now, click ‘Create’ and then ‘Movie’ to open the project interface on screen. Browse the ‘Media’ option from the top left corner of the timeline and explore the video gallery on screen and pick the desired video for editing then hit ‘Add’ and then ‘Use’.

Step 3: The source video gets added to the timeline. You need to reach to the starting point of the video, so that you can add audio from there. Add audio by following similar process to that of adding video from the gallery, but tap ‘Audio’ after clicking the ‘Add Media’ button. Ensure that music has been placed at background, by tapping the ‘Background’ button from the bottom of the screen. By clicking the ‘Theme Music’ option you can find the synced media on your device.

Step 4: Click ‘Play’ for previewing the audio visual, and click ‘Done’ if satisfied with your new creation.

Tip: iMovie will loop the background audio automatically, in case the video runs longer than the audio. It is recommended to adjust their lengths while merging them.

Part 4: How to download royalty free music from website

Few of the video editing software comes up with in-built library for music but not all of them. When there is no music with the software, you might import music from an external source to add audio to your video.

The biggest problem while using the audio tracks is copyright issues, they are not always copyright free. But, there is nothing to worry about. There are sites that offer free of cost stock music/audio tracks across genres that you can use and make a breath-taking audio visual. Let’s go through the most popular royalty free music sites.

Free Stock Music

Free Stock Music contains a library full of audio tracks across genres that you can avail for free. MP3, AIFF, and WAV audio formats are available within this site and asks you for free sign-up. You don’t have to provide any attribution to download the music.

Machinima Sound

Though this site doesn’t offer free music for you, few tracks might be there to suit your needs. You can find them under ‘LEGACY TRACKS’ at the bottom of the page. This site has a huge collection of tracks divided into genres, moods, and stingers. The audio is available in MP3 format and for attributions you might need specific license.

Free Soundtrack Music

Free Soundtrack Music enables you to access numerous royalty-free music tracks that you can make use of in your audio-visuals. Brilliant audio tracks are available with this audio library that you can download and add to your videos. When they say add credit, it usually means the music is paid and you need to buy the credits.

Part 5: Audio editing - 5 tips for mixing audio

Keyframe audio Levels

After fixing the primary audio, you shift your task to the new audio that you are adding to the video. Preview your track and make adjustments, then add the music to timeline and start balancing everything that seems out of place by managing the keyframes. Either work with the clip keyframes, or with the entire track, do whatever seems more pleasing with the composition.

Use filters and effects

You can apply filters/effects as you require, and keep in mind that an audio should only be added for enhanced effects, when you have a clear source for that effect. They shouldn’t make the composition weird. Use appropriate filters that separate a voice-over and a telephonic voice from usual dialogue in a video/audio.

Volume is important

Editing video or audio clip is just like attending a live concert. If not paid attention, the surrounding music will overpower the vocalist, or the guitar might be too low to be audible due to the dominant bass effect. The volume should be properly tuned to match with the rest of the audio visuals while adding audio to video. You can pick portions of the audio and balance audio level accordingly to allow a drop in volume during vocals and rise when there are no vocals.

Change tempo

The change in tempo enhances the composition. You can get creative and experiment. Let’s say there is a portion in your video that is slow and has music at a regular pace. Then why not stretch the tempo and slow it down to blend properly with your video? Altering the tempo brings more creative aspects to create better audio visuals.

Use fade in and fade out

While adding audio to video, if the new one music is instrumental whereas the existing one in the video is a quiet background track, the sudden change in volume might sound weird. Effective use of fades can lower the aural unexpectedness of the instruments.

Final Verdict

Coming towards the end of the discussion and after going through an elaborated list of video editing applications, we came to a final verdict that Filmora sound to be the best out of them. It allows you to flawlessly edit audio and video files on your desktop, with multiple in-built royalty free music tracks to choose from that can enhance your video’s beauty.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Videos are everywhere around us, to promote a brand, create an Ad, or for larger programs like movies. Only a voice-over or a clip fails to grab attention of the audience, so you got to add music to the video and make it spectacularly fascinating. By adding background music to a video, you kill its monotony and make it more appealing to touch people’s heart and evoke the response your video is intended to.

If you want to explore the numerous options to edit and add audio to videos with free audio editor , then you have come to the right spot.

Through this article, we are going to introduce you to various desktop, and phone based applications as well as free online methods to help you add audio to your videos and make them strikingly beautiful.

• Part1: How to add music to videos on Desktop
• Part2: How to add audio to video online
• Part3: How to add music to videos on Mobile Phone
• Part4: How to download royalty free music from website
• Part5: Audio editing - 5 tips for mixing audio

You may also like

15 Free Music Sites to Use (Royalty Free) >>

Part 1: How to add music to videos on Desktop

1. How to add audio to videos with for Windows 10, 8, 7

Filmora

When you need a video editing software application that comes with a brilliant built-in audio library, you can undoubtedly pick Filmora to save you.

This is a perfect application for Windows PC, which enables you to add music to video (.MP3, .WMA, or .OGG audio files to .AVI, .MP4, .MKV videos) files while allowing you to remove any existing background music from the videos as well. Its intuitive design with drag and drop features makes editing videos cake walk.

Isn’t it great when the software supports such wide varieties of audio and video formats and helps you create the most enthralling videos for you?

Explore the way it transforms your mundane videos to an exquisite piece of art, within no time. Here is the step-by-step guide for Filmora –

Step 1: Where to import audio

Install Wondershare Filmora from the official website on your computer and launch it. Once the software gets launched tap ‘MEDIA’ and then click the ‘IMPORT’ tab just below the menu bar. Now, from the drop down list click on ‘Import Media Files’ to choose the video file, and then repeat the process to pick a desired background music file.

Note: You can also use the in-built music tracks to add music to your video by selecting the ‘MUSIC’ tab.

Step 2: How to add music to timeline

Now, hover the mouse over the audio and video files you have just imported to Filmora and then tap the ‘+’ sign on it (displays ‘Add to Project’). You can also drag the media files down to the timeline.

Step 3: Edit music file

You can edit the music by double tapping the audio from the timeline. It will show you the audio panel at the top of the screen. You can the audio to fade in or fade out, manage the volume, pitch, speed, and set the desired equalizer as well.

Step 4: Export

Now that you have made the desired changes to your video, tap on the ‘EXPORT’ tab on the toolbar to export the video. The exported file can be saved in .MP4, and .WMV formats and rename, define the resolution as well.

2. How to add audio to videos on Mac

VLC

Most people have no idea that VLC is not only a media player but a video editor as well, which allows you to add music to video. This open source cross-platform multimedia player supports almost all multimedia files and various streaming protocols.

VLC step-by-step guide to add audio to video –

Step 1: Add audio file

First of all install VLC media player on your computer and launch it. Now, tap the click file tab from the menu bar at the top. After that, pick the ‘Advanced Open File’ option from the drop down menu.

Step 2: Import audio and video

You need to click the ‘Browse…’ button for importing video, and select the ‘Play another media synchronously’. Now, click the ‘Choose…’ button for importing an audio file for editing. After that, you need to click the ‘Open’ button. You also have the option for adding sub-titles to your video. Now that you have imported and merged both the audio and video files, you can also enhance the audio settings.

Step 3: Quick Tip

Tap the ‘Window’ from the top bar and click on ‘Audio Effects…’ for applying the various audio effects to your edited video.

QuickTime

QuickTime Player is the default media player for Mac computer that supports older medial formats including QTVR, MIDI files on Snow Leopard and OS X Lion, and interactive QuickTime movies.

Entering QuickTime 7 Pro registration codes, you can unlock the QuickTime Pro functions that will enable you to add music to video files. If you don’t have it on your computer, then install it and find under the ‘Utilities’ folder within the ‘Applications’ folder. Here is the step-by-step guide for QuickTime to add audio to video –

Step 1: Import the files

First of all, launch QuickTime Player and tap ‘File’ and then click ‘Open File’. Pick your desired audio file to be imported. On the subsequent window of QuickTime Player, select ‘Edit’ and then tap ‘Select All’ to import the complete audio file. Hit ‘Edit’ and tap on the ‘Copy’ option.

Step 2: Import video and add audio to QuickTime movie

Now, you need to open the desired video that you are going to add audio to. For that, you need to first open the video in QuickTime and the click ‘Edit’ and ‘Add Clip to End’.

Note: You can add a part of the audio to the video by tapping ‘Edit’ and then ‘Add to Selection and Scale’. ‘Add to Selection and Scale’ fastens or lowers down the pace of the audio track to fit with the video’s length (that you have selected to add audio to).

3. How to add audio to videos with on Linux

Mkvmerge

This software for the Linux system is broadly known for editing the Matroska Multimedia Container. The GUI of this tool is much appealing but is rather simple and basic.

The software helps you to merge the audio or video multimedia streams into one single Matroska file. Matroska acts exactly like AVI, ASF, or MP4 the common container files. The Matroska files have .MKV extension for videos which includes audio and subtitles as well, files with a .MK3D extension represent stereoscopic video, .MKS for only subtitles, and .MKA for audio-only files.

Step-by-step guide for merging audio into video: (MKV ONLY)

Step 1: Add audio to video files

Download the software and launch it on your Linux computer. From the mkvtoolnix-gui package, open the mkvmerge GUI. Click the ‘add’ button for importing the audio and video files to the software interface.

Step 2: Choose the audio track

After importing the audio and video files, select the new audio tracks by marking the check boxes against them, under the ‘Tracks, chapters and tags’ section. You can also set the language in the ‘General track options’ and delay under ‘Format specific options’ tab.

Step 3: Merge the files

Mention the output format under ‘Output filename’ section and then tap ‘Start muxing’. This process will save the video file. Using this program you can also remover tracks from a video and fix the default audio track as well.

Part 2: How to add music to videos online

Mp3Care

MP3Care is an online video editing application that people mostly use to add audio to video files. This application wipes out the existing audio track from the video file and mixes the new audio file that you upload to create an interesting video.

The supported audio input format is MP3, whereas the supported video files include MKV, FLV, AVI, MOV, MP4, and WMV. You can record a video on your mobile phone or tablet and merge a desired audio background with this using MP3Care. All you need to do is select this recorded video and a preferred audio track in this website and get going.

Steps for adding audio track to video –

Step 1: Launch the web browser and open this application, then choose the audio and video file as per the online instruction.

Step 2: After you are done with the video selection, tap ‘ADD MUSIC TO VIDEO’ and then download your edited video file.

AddAudioToVideo

AddAudioToVideo is an online application for adding music/audio to a video. MP3 audio and AVI, WMV, MOV, and MP4 video formats are only supported with this program. It replaces the MP3 audio from any video and the uploaded files get removed after a while from the web.

Step-by-step guide –

Step 1: Choose a video file

You need to first select the video file from your local drive after browsing to this site.

Step 2: Choose audio files

Select the MP3 audio file after the video file. Tap ‘Upload’ to get the files uploaded to the program and wait for some time to get them merged together.

Tip: The video file size limit is up to 500 MB.

Check out more ways of adding music to video online >>

Part 3: How to add music to videos on Mobile Phone

1. How to add audio to video on Android

Filmora

The best method to add music to video files on Android devices is none other than Filmora. A video editing app that has no time limit to edit a video and leaves no watermark on videos either is always the talk of the show.

Using the music and effects, you can indeed make hilarious funny-videos to entertain yourself and your friends. You can create videos simply by selecting pictures and videos from your phone, Instagram, or Facebook and select a theme, template, mix some music, transitions, subtitles, filters etc. and then get the video saved on your phone or shared over popular social media platforms like Facebook, Instagram, WhatsApp, Vimeo, Email, Tumblr, or YouTube.

The best part about this app is it supports multiple international languages, fits the popular ratios of Instagram and YouTube during exporting of video, allows real-time preview of clips, exports HD videos, and provides overlay elements for the best video editing experience.

Let’s go through the step-by-step guide –

Step 1: Select video and audio

Install Filmora on your Android device and launch it. Click the ‘CREATE NEW VIDEO’ over there and select the desired video. After that, tap on the ‘Add’ button found on the right side of the screen and click ‘NEXT’ on the top right part of the mobile screen.

Step 2: Add audio to video

You will be navigated to the editing interface. Click on ‘MUSIC’ from the right toolbar and then choose the desired audio after pressing plus icon. Play and confirm the audio by clicking ‘OKAY’ on the top right corner.

Step 3: Export

You can swap the music by clicking the thumbnail icon at the bottom of the screen. Save the edited video by tapping ‘Save’

KineMaster

It is a fully-featured app in Android Play store that supports numerous images, video, and text layers along with multi-track audio, precise trimming and cutting, volume envelope control, 3D transition, color LUT features and the likes.

It allows a great amount of control for an app that does editing over a mobile. Artists and educators will make use of the handwriting layers for drawing directly over the video. It supports most of the video, audio, and image formats.

Tutorial Guide for KineMaster –

Step 1: Launch KineMaster

Install and launch the app on your Android phone. Click the ‘+’ icon found in the middle of the app screen and then tap ‘Empty Project’ for a new project or ‘Project Assistant’ otherwise.

Step 2: Select media

Under the media tab, choose the desired video file and then tap ‘Background Audio’ tab. From the left panel you can choose almost 8 categories for audio.

Tips: Without tapping the plus ‘+’ icon on the music, the audio will be added to the desired video.

Step 3: Edit and export

Now, select the preferred audio track and click the share icon from the left panel. Confirm your actions by tapping ‘Export’.

Note: Voice change, looping music, or setting up the fade in/out effect is a cake walk with this app. You can also set resolution, frame rate, and bitrate using this video editing app.

2. How to add audio to video on iPhone/iPad

iMovie

If you want to add music to video in your iPhone, then the in-built iMovie option helps you import music from Theme, iTunes and your own music. Your videos will be turned into exhilarating master pieces.

You can effortlessly browse through the music files and create awesome 4K-resolution movie and Hollywood-style trailers to amaze your friends. iMovie is built to work in sync with your iOS and Mac devices.

It doesn’t matter where you are working, we mean from your iPhone to your iPad or Mac system, the project can be synced automatically as you move ahead. Once you are done editing, the movie will show up on iMovie Theatre across your iOS and Mac devices.

The step-by-step guide to add music to video using iMovie –

Step 1: On your iPhone launch the iMovie app and click ‘Project’ from the top of the screen, and tap ‘Create Project’ represented by a ‘+’ icon.

Step 2: Now, click ‘Create’ and then ‘Movie’ to open the project interface on screen. Browse the ‘Media’ option from the top left corner of the timeline and explore the video gallery on screen and pick the desired video for editing then hit ‘Add’ and then ‘Use’.

Step 3: The source video gets added to the timeline. You need to reach to the starting point of the video, so that you can add audio from there. Add audio by following similar process to that of adding video from the gallery, but tap ‘Audio’ after clicking the ‘Add Media’ button. Ensure that music has been placed at background, by tapping the ‘Background’ button from the bottom of the screen. By clicking the ‘Theme Music’ option you can find the synced media on your device.

Step 4: Click ‘Play’ for previewing the audio visual, and click ‘Done’ if satisfied with your new creation.

Tip: iMovie will loop the background audio automatically, in case the video runs longer than the audio. It is recommended to adjust their lengths while merging them.

Part 4: How to download royalty free music from website

Few of the video editing software comes up with in-built library for music but not all of them. When there is no music with the software, you might import music from an external source to add audio to your video.

The biggest problem while using the audio tracks is copyright issues, they are not always copyright free. But, there is nothing to worry about. There are sites that offer free of cost stock music/audio tracks across genres that you can use and make a breath-taking audio visual. Let’s go through the most popular royalty free music sites.

Free Stock Music

Free Stock Music contains a library full of audio tracks across genres that you can avail for free. MP3, AIFF, and WAV audio formats are available within this site and asks you for free sign-up. You don’t have to provide any attribution to download the music.

Machinima Sound

Though this site doesn’t offer free music for you, few tracks might be there to suit your needs. You can find them under ‘LEGACY TRACKS’ at the bottom of the page. This site has a huge collection of tracks divided into genres, moods, and stingers. The audio is available in MP3 format and for attributions you might need specific license.

Free Soundtrack Music

Free Soundtrack Music enables you to access numerous royalty-free music tracks that you can make use of in your audio-visuals. Brilliant audio tracks are available with this audio library that you can download and add to your videos. When they say add credit, it usually means the music is paid and you need to buy the credits.

Part 5: Audio editing - 5 tips for mixing audio

Keyframe audio Levels

After fixing the primary audio, you shift your task to the new audio that you are adding to the video. Preview your track and make adjustments, then add the music to timeline and start balancing everything that seems out of place by managing the keyframes. Either work with the clip keyframes, or with the entire track, do whatever seems more pleasing with the composition.

Use filters and effects

You can apply filters/effects as you require, and keep in mind that an audio should only be added for enhanced effects, when you have a clear source for that effect. They shouldn’t make the composition weird. Use appropriate filters that separate a voice-over and a telephonic voice from usual dialogue in a video/audio.

Volume is important

Editing video or audio clip is just like attending a live concert. If not paid attention, the surrounding music will overpower the vocalist, or the guitar might be too low to be audible due to the dominant bass effect. The volume should be properly tuned to match with the rest of the audio visuals while adding audio to video. You can pick portions of the audio and balance audio level accordingly to allow a drop in volume during vocals and rise when there are no vocals.

Change tempo

The change in tempo enhances the composition. You can get creative and experiment. Let’s say there is a portion in your video that is slow and has music at a regular pace. Then why not stretch the tempo and slow it down to blend properly with your video? Altering the tempo brings more creative aspects to create better audio visuals.

Use fade in and fade out

While adding audio to video, if the new one music is instrumental whereas the existing one in the video is a quiet background track, the sudden change in volume might sound weird. Effective use of fades can lower the aural unexpectedness of the instruments.

Final Verdict

Coming towards the end of the discussion and after going through an elaborated list of video editing applications, we came to a final verdict that Filmora sound to be the best out of them. It allows you to flawlessly edit audio and video files on your desktop, with multiple in-built royalty free music tracks to choose from that can enhance your video’s beauty.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Videos are everywhere around us, to promote a brand, create an Ad, or for larger programs like movies. Only a voice-over or a clip fails to grab attention of the audience, so you got to add music to the video and make it spectacularly fascinating. By adding background music to a video, you kill its monotony and make it more appealing to touch people’s heart and evoke the response your video is intended to.

If you want to explore the numerous options to edit and add audio to videos with free audio editor , then you have come to the right spot.

Through this article, we are going to introduce you to various desktop, and phone based applications as well as free online methods to help you add audio to your videos and make them strikingly beautiful.

• Part1: How to add music to videos on Desktop
• Part2: How to add audio to video online
• Part3: How to add music to videos on Mobile Phone
• Part4: How to download royalty free music from website
• Part5: Audio editing - 5 tips for mixing audio

You may also like

15 Free Music Sites to Use (Royalty Free) >>

Part 1: How to add music to videos on Desktop

1. How to add audio to videos with for Windows 10, 8, 7

Filmora

When you need a video editing software application that comes with a brilliant built-in audio library, you can undoubtedly pick Filmora to save you.

This is a perfect application for Windows PC, which enables you to add music to video (.MP3, .WMA, or .OGG audio files to .AVI, .MP4, .MKV videos) files while allowing you to remove any existing background music from the videos as well. Its intuitive design with drag and drop features makes editing videos cake walk.

Isn’t it great when the software supports such wide varieties of audio and video formats and helps you create the most enthralling videos for you?

Explore the way it transforms your mundane videos to an exquisite piece of art, within no time. Here is the step-by-step guide for Filmora –

Step 1: Where to import audio

Install Wondershare Filmora from the official website on your computer and launch it. Once the software gets launched tap ‘MEDIA’ and then click the ‘IMPORT’ tab just below the menu bar. Now, from the drop down list click on ‘Import Media Files’ to choose the video file, and then repeat the process to pick a desired background music file.

Note: You can also use the in-built music tracks to add music to your video by selecting the ‘MUSIC’ tab.

Step 2: How to add music to timeline

Now, hover the mouse over the audio and video files you have just imported to Filmora and then tap the ‘+’ sign on it (displays ‘Add to Project’). You can also drag the media files down to the timeline.

Step 3: Edit music file

You can edit the music by double tapping the audio from the timeline. It will show you the audio panel at the top of the screen. You can the audio to fade in or fade out, manage the volume, pitch, speed, and set the desired equalizer as well.

Step 4: Export

Now that you have made the desired changes to your video, tap on the ‘EXPORT’ tab on the toolbar to export the video. The exported file can be saved in .MP4, and .WMV formats and rename, define the resolution as well.

2. How to add audio to videos on Mac

VLC

Most people have no idea that VLC is not only a media player but a video editor as well, which allows you to add music to video. This open source cross-platform multimedia player supports almost all multimedia files and various streaming protocols.

VLC step-by-step guide to add audio to video –

Step 1: Add audio file

First of all install VLC media player on your computer and launch it. Now, tap the click file tab from the menu bar at the top. After that, pick the ‘Advanced Open File’ option from the drop down menu.

Step 2: Import audio and video

You need to click the ‘Browse…’ button for importing video, and select the ‘Play another media synchronously’. Now, click the ‘Choose…’ button for importing an audio file for editing. After that, you need to click the ‘Open’ button. You also have the option for adding sub-titles to your video. Now that you have imported and merged both the audio and video files, you can also enhance the audio settings.

Step 3: Quick Tip

Tap the ‘Window’ from the top bar and click on ‘Audio Effects…’ for applying the various audio effects to your edited video.

QuickTime

QuickTime Player is the default media player for Mac computer that supports older medial formats including QTVR, MIDI files on Snow Leopard and OS X Lion, and interactive QuickTime movies.

Entering QuickTime 7 Pro registration codes, you can unlock the QuickTime Pro functions that will enable you to add music to video files. If you don’t have it on your computer, then install it and find under the ‘Utilities’ folder within the ‘Applications’ folder. Here is the step-by-step guide for QuickTime to add audio to video –

Step 1: Import the files

First of all, launch QuickTime Player and tap ‘File’ and then click ‘Open File’. Pick your desired audio file to be imported. On the subsequent window of QuickTime Player, select ‘Edit’ and then tap ‘Select All’ to import the complete audio file. Hit ‘Edit’ and tap on the ‘Copy’ option.

Step 2: Import video and add audio to QuickTime movie

Now, you need to open the desired video that you are going to add audio to. For that, you need to first open the video in QuickTime and the click ‘Edit’ and ‘Add Clip to End’.

Note: You can add a part of the audio to the video by tapping ‘Edit’ and then ‘Add to Selection and Scale’. ‘Add to Selection and Scale’ fastens or lowers down the pace of the audio track to fit with the video’s length (that you have selected to add audio to).

3. How to add audio to videos with on Linux

Mkvmerge

This software for the Linux system is broadly known for editing the Matroska Multimedia Container. The GUI of this tool is much appealing but is rather simple and basic.

The software helps you to merge the audio or video multimedia streams into one single Matroska file. Matroska acts exactly like AVI, ASF, or MP4 the common container files. The Matroska files have .MKV extension for videos which includes audio and subtitles as well, files with a .MK3D extension represent stereoscopic video, .MKS for only subtitles, and .MKA for audio-only files.

Step-by-step guide for merging audio into video: (MKV ONLY)

Step 1: Add audio to video files

Download the software and launch it on your Linux computer. From the mkvtoolnix-gui package, open the mkvmerge GUI. Click the ‘add’ button for importing the audio and video files to the software interface.

Step 2: Choose the audio track

After importing the audio and video files, select the new audio tracks by marking the check boxes against them, under the ‘Tracks, chapters and tags’ section. You can also set the language in the ‘General track options’ and delay under ‘Format specific options’ tab.

Step 3: Merge the files

Mention the output format under ‘Output filename’ section and then tap ‘Start muxing’. This process will save the video file. Using this program you can also remover tracks from a video and fix the default audio track as well.

Part 2: How to add music to videos online

Mp3Care

MP3Care is an online video editing application that people mostly use to add audio to video files. This application wipes out the existing audio track from the video file and mixes the new audio file that you upload to create an interesting video.

The supported audio input format is MP3, whereas the supported video files include MKV, FLV, AVI, MOV, MP4, and WMV. You can record a video on your mobile phone or tablet and merge a desired audio background with this using MP3Care. All you need to do is select this recorded video and a preferred audio track in this website and get going.

Steps for adding audio track to video –

Step 1: Launch the web browser and open this application, then choose the audio and video file as per the online instruction.

Step 2: After you are done with the video selection, tap ‘ADD MUSIC TO VIDEO’ and then download your edited video file.

AddAudioToVideo

AddAudioToVideo is an online application for adding music/audio to a video. MP3 audio and AVI, WMV, MOV, and MP4 video formats are only supported with this program. It replaces the MP3 audio from any video and the uploaded files get removed after a while from the web.

Step-by-step guide –

Step 1: Choose a video file

You need to first select the video file from your local drive after browsing to this site.

Step 2: Choose audio files

Select the MP3 audio file after the video file. Tap ‘Upload’ to get the files uploaded to the program and wait for some time to get them merged together.

Tip: The video file size limit is up to 500 MB.

Check out more ways of adding music to video online >>

Part 3: How to add music to videos on Mobile Phone

1. How to add audio to video on Android

Filmora

The best method to add music to video files on Android devices is none other than Filmora. A video editing app that has no time limit to edit a video and leaves no watermark on videos either is always the talk of the show.

Using the music and effects, you can indeed make hilarious funny-videos to entertain yourself and your friends. You can create videos simply by selecting pictures and videos from your phone, Instagram, or Facebook and select a theme, template, mix some music, transitions, subtitles, filters etc. and then get the video saved on your phone or shared over popular social media platforms like Facebook, Instagram, WhatsApp, Vimeo, Email, Tumblr, or YouTube.

The best part about this app is it supports multiple international languages, fits the popular ratios of Instagram and YouTube during exporting of video, allows real-time preview of clips, exports HD videos, and provides overlay elements for the best video editing experience.

Let’s go through the step-by-step guide –

Step 1: Select video and audio

Install Filmora on your Android device and launch it. Click the ‘CREATE NEW VIDEO’ over there and select the desired video. After that, tap on the ‘Add’ button found on the right side of the screen and click ‘NEXT’ on the top right part of the mobile screen.

Step 2: Add audio to video

You will be navigated to the editing interface. Click on ‘MUSIC’ from the right toolbar and then choose the desired audio after pressing plus icon. Play and confirm the audio by clicking ‘OKAY’ on the top right corner.

Step 3: Export

You can swap the music by clicking the thumbnail icon at the bottom of the screen. Save the edited video by tapping ‘Save’

KineMaster

It is a fully-featured app in Android Play store that supports numerous images, video, and text layers along with multi-track audio, precise trimming and cutting, volume envelope control, 3D transition, color LUT features and the likes.

It allows a great amount of control for an app that does editing over a mobile. Artists and educators will make use of the handwriting layers for drawing directly over the video. It supports most of the video, audio, and image formats.

Tutorial Guide for KineMaster –

Step 1: Launch KineMaster

Install and launch the app on your Android phone. Click the ‘+’ icon found in the middle of the app screen and then tap ‘Empty Project’ for a new project or ‘Project Assistant’ otherwise.

Step 2: Select media

Under the media tab, choose the desired video file and then tap ‘Background Audio’ tab. From the left panel you can choose almost 8 categories for audio.

Tips: Without tapping the plus ‘+’ icon on the music, the audio will be added to the desired video.

Step 3: Edit and export

Now, select the preferred audio track and click the share icon from the left panel. Confirm your actions by tapping ‘Export’.

Note: Voice change, looping music, or setting up the fade in/out effect is a cake walk with this app. You can also set resolution, frame rate, and bitrate using this video editing app.

2. How to add audio to video on iPhone/iPad

iMovie

If you want to add music to video in your iPhone, then the in-built iMovie option helps you import music from Theme, iTunes and your own music. Your videos will be turned into exhilarating master pieces.

You can effortlessly browse through the music files and create awesome 4K-resolution movie and Hollywood-style trailers to amaze your friends. iMovie is built to work in sync with your iOS and Mac devices.

It doesn’t matter where you are working, we mean from your iPhone to your iPad or Mac system, the project can be synced automatically as you move ahead. Once you are done editing, the movie will show up on iMovie Theatre across your iOS and Mac devices.

The step-by-step guide to add music to video using iMovie –

Step 1: On your iPhone launch the iMovie app and click ‘Project’ from the top of the screen, and tap ‘Create Project’ represented by a ‘+’ icon.

Step 2: Now, click ‘Create’ and then ‘Movie’ to open the project interface on screen. Browse the ‘Media’ option from the top left corner of the timeline and explore the video gallery on screen and pick the desired video for editing then hit ‘Add’ and then ‘Use’.

Step 3: The source video gets added to the timeline. You need to reach to the starting point of the video, so that you can add audio from there. Add audio by following similar process to that of adding video from the gallery, but tap ‘Audio’ after clicking the ‘Add Media’ button. Ensure that music has been placed at background, by tapping the ‘Background’ button from the bottom of the screen. By clicking the ‘Theme Music’ option you can find the synced media on your device.

Step 4: Click ‘Play’ for previewing the audio visual, and click ‘Done’ if satisfied with your new creation.

Tip: iMovie will loop the background audio automatically, in case the video runs longer than the audio. It is recommended to adjust their lengths while merging them.

Part 4: How to download royalty free music from website

Few of the video editing software comes up with in-built library for music but not all of them. When there is no music with the software, you might import music from an external source to add audio to your video.

The biggest problem while using the audio tracks is copyright issues, they are not always copyright free. But, there is nothing to worry about. There are sites that offer free of cost stock music/audio tracks across genres that you can use and make a breath-taking audio visual. Let’s go through the most popular royalty free music sites.

Free Stock Music

Free Stock Music contains a library full of audio tracks across genres that you can avail for free. MP3, AIFF, and WAV audio formats are available within this site and asks you for free sign-up. You don’t have to provide any attribution to download the music.

Machinima Sound

Though this site doesn’t offer free music for you, few tracks might be there to suit your needs. You can find them under ‘LEGACY TRACKS’ at the bottom of the page. This site has a huge collection of tracks divided into genres, moods, and stingers. The audio is available in MP3 format and for attributions you might need specific license.

Free Soundtrack Music

Free Soundtrack Music enables you to access numerous royalty-free music tracks that you can make use of in your audio-visuals. Brilliant audio tracks are available with this audio library that you can download and add to your videos. When they say add credit, it usually means the music is paid and you need to buy the credits.

Part 5: Audio editing - 5 tips for mixing audio

Keyframe audio Levels

After fixing the primary audio, you shift your task to the new audio that you are adding to the video. Preview your track and make adjustments, then add the music to timeline and start balancing everything that seems out of place by managing the keyframes. Either work with the clip keyframes, or with the entire track, do whatever seems more pleasing with the composition.

Use filters and effects

You can apply filters/effects as you require, and keep in mind that an audio should only be added for enhanced effects, when you have a clear source for that effect. They shouldn’t make the composition weird. Use appropriate filters that separate a voice-over and a telephonic voice from usual dialogue in a video/audio.

Volume is important

Editing video or audio clip is just like attending a live concert. If not paid attention, the surrounding music will overpower the vocalist, or the guitar might be too low to be audible due to the dominant bass effect. The volume should be properly tuned to match with the rest of the audio visuals while adding audio to video. You can pick portions of the audio and balance audio level accordingly to allow a drop in volume during vocals and rise when there are no vocals.

Change tempo

The change in tempo enhances the composition. You can get creative and experiment. Let’s say there is a portion in your video that is slow and has music at a regular pace. Then why not stretch the tempo and slow it down to blend properly with your video? Altering the tempo brings more creative aspects to create better audio visuals.

Use fade in and fade out

While adding audio to video, if the new one music is instrumental whereas the existing one in the video is a quiet background track, the sudden change in volume might sound weird. Effective use of fades can lower the aural unexpectedness of the instruments.

Final Verdict

Coming towards the end of the discussion and after going through an elaborated list of video editing applications, we came to a final verdict that Filmora sound to be the best out of them. It allows you to flawlessly edit audio and video files on your desktop, with multiple in-built royalty free music tracks to choose from that can enhance your video’s beauty.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Videos are everywhere around us, to promote a brand, create an Ad, or for larger programs like movies. Only a voice-over or a clip fails to grab attention of the audience, so you got to add music to the video and make it spectacularly fascinating. By adding background music to a video, you kill its monotony and make it more appealing to touch people’s heart and evoke the response your video is intended to.

If you want to explore the numerous options to edit and add audio to videos with free audio editor , then you have come to the right spot.

Through this article, we are going to introduce you to various desktop, and phone based applications as well as free online methods to help you add audio to your videos and make them strikingly beautiful.

• Part1: How to add music to videos on Desktop
• Part2: How to add audio to video online
• Part3: How to add music to videos on Mobile Phone
• Part4: How to download royalty free music from website
• Part5: Audio editing - 5 tips for mixing audio

You may also like

15 Free Music Sites to Use (Royalty Free) >>

Part 1: How to add music to videos on Desktop

1. How to add audio to videos with for Windows 10, 8, 7

Filmora

When you need a video editing software application that comes with a brilliant built-in audio library, you can undoubtedly pick Filmora to save you.

This is a perfect application for Windows PC, which enables you to add music to video (.MP3, .WMA, or .OGG audio files to .AVI, .MP4, .MKV videos) files while allowing you to remove any existing background music from the videos as well. Its intuitive design with drag and drop features makes editing videos cake walk.

Isn’t it great when the software supports such wide varieties of audio and video formats and helps you create the most enthralling videos for you?

Explore the way it transforms your mundane videos to an exquisite piece of art, within no time. Here is the step-by-step guide for Filmora –

Step 1: Where to import audio

Install Wondershare Filmora from the official website on your computer and launch it. Once the software gets launched tap ‘MEDIA’ and then click the ‘IMPORT’ tab just below the menu bar. Now, from the drop down list click on ‘Import Media Files’ to choose the video file, and then repeat the process to pick a desired background music file.

Note: You can also use the in-built music tracks to add music to your video by selecting the ‘MUSIC’ tab.

Step 2: How to add music to timeline

Now, hover the mouse over the audio and video files you have just imported to Filmora and then tap the ‘+’ sign on it (displays ‘Add to Project’). You can also drag the media files down to the timeline.

Step 3: Edit music file

You can edit the music by double tapping the audio from the timeline. It will show you the audio panel at the top of the screen. You can the audio to fade in or fade out, manage the volume, pitch, speed, and set the desired equalizer as well.

Step 4: Export

Now that you have made the desired changes to your video, tap on the ‘EXPORT’ tab on the toolbar to export the video. The exported file can be saved in .MP4, and .WMV formats and rename, define the resolution as well.

2. How to add audio to videos on Mac

VLC

Most people have no idea that VLC is not only a media player but a video editor as well, which allows you to add music to video. This open source cross-platform multimedia player supports almost all multimedia files and various streaming protocols.

VLC step-by-step guide to add audio to video –

Step 1: Add audio file

First of all install VLC media player on your computer and launch it. Now, tap the click file tab from the menu bar at the top. After that, pick the ‘Advanced Open File’ option from the drop down menu.

Step 2: Import audio and video

You need to click the ‘Browse…’ button for importing video, and select the ‘Play another media synchronously’. Now, click the ‘Choose…’ button for importing an audio file for editing. After that, you need to click the ‘Open’ button. You also have the option for adding sub-titles to your video. Now that you have imported and merged both the audio and video files, you can also enhance the audio settings.

Step 3: Quick Tip

Tap the ‘Window’ from the top bar and click on ‘Audio Effects…’ for applying the various audio effects to your edited video.

QuickTime

QuickTime Player is the default media player for Mac computer that supports older medial formats including QTVR, MIDI files on Snow Leopard and OS X Lion, and interactive QuickTime movies.

Entering QuickTime 7 Pro registration codes, you can unlock the QuickTime Pro functions that will enable you to add music to video files. If you don’t have it on your computer, then install it and find under the ‘Utilities’ folder within the ‘Applications’ folder. Here is the step-by-step guide for QuickTime to add audio to video –

Step 1: Import the files

First of all, launch QuickTime Player and tap ‘File’ and then click ‘Open File’. Pick your desired audio file to be imported. On the subsequent window of QuickTime Player, select ‘Edit’ and then tap ‘Select All’ to import the complete audio file. Hit ‘Edit’ and tap on the ‘Copy’ option.

Step 2: Import video and add audio to QuickTime movie

Now, you need to open the desired video that you are going to add audio to. For that, you need to first open the video in QuickTime and the click ‘Edit’ and ‘Add Clip to End’.

Note: You can add a part of the audio to the video by tapping ‘Edit’ and then ‘Add to Selection and Scale’. ‘Add to Selection and Scale’ fastens or lowers down the pace of the audio track to fit with the video’s length (that you have selected to add audio to).

3. How to add audio to videos with on Linux

Mkvmerge

This software for the Linux system is broadly known for editing the Matroska Multimedia Container. The GUI of this tool is much appealing but is rather simple and basic.

The software helps you to merge the audio or video multimedia streams into one single Matroska file. Matroska acts exactly like AVI, ASF, or MP4 the common container files. The Matroska files have .MKV extension for videos which includes audio and subtitles as well, files with a .MK3D extension represent stereoscopic video, .MKS for only subtitles, and .MKA for audio-only files.

Step-by-step guide for merging audio into video: (MKV ONLY)

Step 1: Add audio to video files

Download the software and launch it on your Linux computer. From the mkvtoolnix-gui package, open the mkvmerge GUI. Click the ‘add’ button for importing the audio and video files to the software interface.

Step 2: Choose the audio track

After importing the audio and video files, select the new audio tracks by marking the check boxes against them, under the ‘Tracks, chapters and tags’ section. You can also set the language in the ‘General track options’ and delay under ‘Format specific options’ tab.

Step 3: Merge the files

Mention the output format under ‘Output filename’ section and then tap ‘Start muxing’. This process will save the video file. Using this program you can also remover tracks from a video and fix the default audio track as well.

Part 2: How to add music to videos online

Mp3Care

MP3Care is an online video editing application that people mostly use to add audio to video files. This application wipes out the existing audio track from the video file and mixes the new audio file that you upload to create an interesting video.

The supported audio input format is MP3, whereas the supported video files include MKV, FLV, AVI, MOV, MP4, and WMV. You can record a video on your mobile phone or tablet and merge a desired audio background with this using MP3Care. All you need to do is select this recorded video and a preferred audio track in this website and get going.

Steps for adding audio track to video –

Step 1: Launch the web browser and open this application, then choose the audio and video file as per the online instruction.

Step 2: After you are done with the video selection, tap ‘ADD MUSIC TO VIDEO’ and then download your edited video file.

AddAudioToVideo

AddAudioToVideo is an online application for adding music/audio to a video. MP3 audio and AVI, WMV, MOV, and MP4 video formats are only supported with this program. It replaces the MP3 audio from any video and the uploaded files get removed after a while from the web.

Step-by-step guide –

Step 1: Choose a video file

You need to first select the video file from your local drive after browsing to this site.

Step 2: Choose audio files

Select the MP3 audio file after the video file. Tap ‘Upload’ to get the files uploaded to the program and wait for some time to get them merged together.

Tip: The video file size limit is up to 500 MB.

Check out more ways of adding music to video online >>

Part 3: How to add music to videos on Mobile Phone

1. How to add audio to video on Android

Filmora

The best method to add music to video files on Android devices is none other than Filmora. A video editing app that has no time limit to edit a video and leaves no watermark on videos either is always the talk of the show.

Using the music and effects, you can indeed make hilarious funny-videos to entertain yourself and your friends. You can create videos simply by selecting pictures and videos from your phone, Instagram, or Facebook and select a theme, template, mix some music, transitions, subtitles, filters etc. and then get the video saved on your phone or shared over popular social media platforms like Facebook, Instagram, WhatsApp, Vimeo, Email, Tumblr, or YouTube.

The best part about this app is it supports multiple international languages, fits the popular ratios of Instagram and YouTube during exporting of video, allows real-time preview of clips, exports HD videos, and provides overlay elements for the best video editing experience.

Let’s go through the step-by-step guide –

Step 1: Select video and audio

Install Filmora on your Android device and launch it. Click the ‘CREATE NEW VIDEO’ over there and select the desired video. After that, tap on the ‘Add’ button found on the right side of the screen and click ‘NEXT’ on the top right part of the mobile screen.

Step 2: Add audio to video

You will be navigated to the editing interface. Click on ‘MUSIC’ from the right toolbar and then choose the desired audio after pressing plus icon. Play and confirm the audio by clicking ‘OKAY’ on the top right corner.

Step 3: Export

You can swap the music by clicking the thumbnail icon at the bottom of the screen. Save the edited video by tapping ‘Save’

KineMaster

It is a fully-featured app in Android Play store that supports numerous images, video, and text layers along with multi-track audio, precise trimming and cutting, volume envelope control, 3D transition, color LUT features and the likes.

It allows a great amount of control for an app that does editing over a mobile. Artists and educators will make use of the handwriting layers for drawing directly over the video. It supports most of the video, audio, and image formats.

Tutorial Guide for KineMaster –

Step 1: Launch KineMaster

Install and launch the app on your Android phone. Click the ‘+’ icon found in the middle of the app screen and then tap ‘Empty Project’ for a new project or ‘Project Assistant’ otherwise.

Step 2: Select media

Under the media tab, choose the desired video file and then tap ‘Background Audio’ tab. From the left panel you can choose almost 8 categories for audio.

Tips: Without tapping the plus ‘+’ icon on the music, the audio will be added to the desired video.

Step 3: Edit and export

Now, select the preferred audio track and click the share icon from the left panel. Confirm your actions by tapping ‘Export’.

Note: Voice change, looping music, or setting up the fade in/out effect is a cake walk with this app. You can also set resolution, frame rate, and bitrate using this video editing app.

2. How to add audio to video on iPhone/iPad

iMovie

If you want to add music to video in your iPhone, then the in-built iMovie option helps you import music from Theme, iTunes and your own music. Your videos will be turned into exhilarating master pieces.

You can effortlessly browse through the music files and create awesome 4K-resolution movie and Hollywood-style trailers to amaze your friends. iMovie is built to work in sync with your iOS and Mac devices.

It doesn’t matter where you are working, we mean from your iPhone to your iPad or Mac system, the project can be synced automatically as you move ahead. Once you are done editing, the movie will show up on iMovie Theatre across your iOS and Mac devices.

The step-by-step guide to add music to video using iMovie –

Step 1: On your iPhone launch the iMovie app and click ‘Project’ from the top of the screen, and tap ‘Create Project’ represented by a ‘+’ icon.

Step 2: Now, click ‘Create’ and then ‘Movie’ to open the project interface on screen. Browse the ‘Media’ option from the top left corner of the timeline and explore the video gallery on screen and pick the desired video for editing then hit ‘Add’ and then ‘Use’.

Step 3: The source video gets added to the timeline. You need to reach to the starting point of the video, so that you can add audio from there. Add audio by following similar process to that of adding video from the gallery, but tap ‘Audio’ after clicking the ‘Add Media’ button. Ensure that music has been placed at background, by tapping the ‘Background’ button from the bottom of the screen. By clicking the ‘Theme Music’ option you can find the synced media on your device.

Step 4: Click ‘Play’ for previewing the audio visual, and click ‘Done’ if satisfied with your new creation.

Tip: iMovie will loop the background audio automatically, in case the video runs longer than the audio. It is recommended to adjust their lengths while merging them.

Part 4: How to download royalty free music from website

Few of the video editing software comes up with in-built library for music but not all of them. When there is no music with the software, you might import music from an external source to add audio to your video.

The biggest problem while using the audio tracks is copyright issues, they are not always copyright free. But, there is nothing to worry about. There are sites that offer free of cost stock music/audio tracks across genres that you can use and make a breath-taking audio visual. Let’s go through the most popular royalty free music sites.

Free Stock Music

Free Stock Music contains a library full of audio tracks across genres that you can avail for free. MP3, AIFF, and WAV audio formats are available within this site and asks you for free sign-up. You don’t have to provide any attribution to download the music.

Machinima Sound

Though this site doesn’t offer free music for you, few tracks might be there to suit your needs. You can find them under ‘LEGACY TRACKS’ at the bottom of the page. This site has a huge collection of tracks divided into genres, moods, and stingers. The audio is available in MP3 format and for attributions you might need specific license.

Free Soundtrack Music

Free Soundtrack Music enables you to access numerous royalty-free music tracks that you can make use of in your audio-visuals. Brilliant audio tracks are available with this audio library that you can download and add to your videos. When they say add credit, it usually means the music is paid and you need to buy the credits.

Part 5: Audio editing - 5 tips for mixing audio

Keyframe audio Levels

After fixing the primary audio, you shift your task to the new audio that you are adding to the video. Preview your track and make adjustments, then add the music to timeline and start balancing everything that seems out of place by managing the keyframes. Either work with the clip keyframes, or with the entire track, do whatever seems more pleasing with the composition.

Use filters and effects

You can apply filters/effects as you require, and keep in mind that an audio should only be added for enhanced effects, when you have a clear source for that effect. They shouldn’t make the composition weird. Use appropriate filters that separate a voice-over and a telephonic voice from usual dialogue in a video/audio.

Volume is important

Editing video or audio clip is just like attending a live concert. If not paid attention, the surrounding music will overpower the vocalist, or the guitar might be too low to be audible due to the dominant bass effect. The volume should be properly tuned to match with the rest of the audio visuals while adding audio to video. You can pick portions of the audio and balance audio level accordingly to allow a drop in volume during vocals and rise when there are no vocals.

Change tempo

The change in tempo enhances the composition. You can get creative and experiment. Let’s say there is a portion in your video that is slow and has music at a regular pace. Then why not stretch the tempo and slow it down to blend properly with your video? Altering the tempo brings more creative aspects to create better audio visuals.

Use fade in and fade out

While adding audio to video, if the new one music is instrumental whereas the existing one in the video is a quiet background track, the sudden change in volume might sound weird. Effective use of fades can lower the aural unexpectedness of the instruments.

Final Verdict

Coming towards the end of the discussion and after going through an elaborated list of video editing applications, we came to a final verdict that Filmora sound to be the best out of them. It allows you to flawlessly edit audio and video files on your desktop, with multiple in-built royalty free music tracks to choose from that can enhance your video’s beauty.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: