“Suspend Voice Recording Features & Embed Original Tunes Using Windows Movie Maker”

How to Mute Audio in Windows Movie Maker?

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Elite Sound Silencers for Online Streaming Content (Windows/Mac 2024 Release)

If you are using the wrong tool, then working with videos can be tough and frustrating. This is because not every tool offers the same features and functionalities that an amazing tool can offer. Let’s take a scenario; imagine you come across a video, but you don’t like the sound of it. What will you do now? Are you going to compromise on the sound, or are you going to find another video?

What if you get a chance to remove sound from the video? This option sounds a lot better than the other options. The next thing you need to look for is a good sound remover. There are a few brilliant tools that allow video editing and are also great sound remover from video. Keep reading the article if you are interested in learning more about this.

In this article

01 How to Remove Sound from Video on Windows and Mac

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

“The Unsung Heroes: Key Contributions of Each Cinematic Craftsperson”

When shooting a small-scale video, only one person handles all department workings. He or she works not only as a director, but also a cinematographer and the camera operator.

However, as the production grows and needs large-scale filming, more specific members are needed for different departments. Whether you want to set up a filming studio, or join a movie-making workshop, you’d better figure out the entire composition of the film crew and choose the best one according to your capabilities.

To simplify the scenario, we have divided the crew into these major departments, as shown below, with their work areas.

What Is the Role of a Producer?

The producer is the main handler of the filming. Before filming, he finds out the content and directions and links with the director and DP for each direction to get the best vision of the music video. The producer are responsible for:

1. Schedule the crew members

Producers can make the call sheets for the crew members to maintain their schedule according to the specific timelines.

2. Find the studio space

To find the studio space, the producers work with the directors to get the exact location according to the script of their music video for better illustrations.

3. Find the gear

Producers found the gear for the studio space and handled the renting of the equipment from the warehouse.

4. Build relationships with the industries

If the filming is starting and you don’t know who to choose, you should build a relationship with the appropriate people in the industry. So that when you are in trouble, you can call them off to get the solution.

Roles of a Director Department

The director is considered to be in charge of filmmaking. His main responsibility is creatively giving the idea to the production and communicating to the crew and characters to check out what they want in their scenes to play out.

The director department mainly consists of the director and the first assistant director, and sometimes there is a 2nd, a 3rd, and 4th AD. For example,

1st AD

The first lead is mainly in charge of time management, communicate with the crew member, and ensuring that the shorts get done safely and readily.

Note: If there is no dialogue in the shorts, then the director usually gives reference pictures of the scenes and moods to act in that way.

You need to work with different people in the industry to check their personalities and work according to them. There is no need to work with the same people repeatedly.

Team for Production Designing

The next and foremost department is the production design. In this the production designer is the leader of all and has to work with the art director. He is mainly in charge of the set builders, set dressers, prop makers, hair and makeup, and costume and wardrobe departments.

In this department, the production designer is mainly involved in decorating the sets, making props, and setting up the lighting.

Cinematographers Department

The cinematic department comes to the frontline to give the shots and the lit music video final touches. In this, the head of the department is also known as the director of photography.

Director of photography

He mainly decides how the shots and the music video footage look. The main action is to handle the lightning and interact with the lights with the environment and the characters. He should build relationships with each other for better illusions.

Director’s monitor

The director’s monitor is the screen that displays a live shoot and filming of everything happening on camera. It mainly gives each take’s exact position and views for coordinating with the director and the DP.

Due to this, they can change the direction and the setup wherever they want and whenever they want.

Camera operators

To operate the camera, the DPs are not involved, but there is a specific job of the camera operators, which handle the shots and moves according to the director’s directions. There are also 1st and 2nd Assistant Cameras (AC) with the camera operators.

1st Assistant Camera

The duty of the 1st AC is to focus on the required target, pulling, swapping the lenses from the camera. He is ensuring that the camera is all set and workable on the shoot day without any trouble.

2nd Assistant Camera

The 2nd AC has to consider the slates of the shots, place exact locations and markers for the characters, and give exposed footage to save for the backup.

Gaffers and key grip

Gaffers and key grip have their own teams for maintaining the lighting and grip work assigned by the DP according to the creative plans.

Digital media technician

It is essential to get the backup of footage of every shot. If you are working on a large scale, the backup planner is recognized as the Digital Media Technician (DMT).

DMT will handle the exposed footage, which Digital Memory Card will do with tapes denoting the card’s number. Make sure to make two backups of the footage to prevent any trouble.

Note: Making two copies for the backup will reduce the risk of corrupted files and physical accidents of losing the footage.

Additional Roles

If you are the music video director, you need a Cinematographer with Camera Operators. He will be in charge of pulling and adjusting all the camera alignments. If you have enough budget, go with the co-producer to help you direct the talents.

To make your subject looks good and modern according to the theme, you should hire hair and makeup artist. If you have more budget, you can do it professionally with more and more crew members.

Conclusion

If you are a starter, then there is no need to worry to pull-off all the roles in a crew; you just need two to three people for the start-up. That’s all about the large production, but whenever you scale up, you should know how to manage all the members with their required areas.

You need to work with different people in the industry to check their personalities and work according to them. There is no need to work with the same people repeatedly.

Team for Production Designing

The next and foremost department is the production design. In this the production designer is the leader of all and has to work with the art director. He is mainly in charge of the set builders, set dressers, prop makers, hair and makeup, and costume and wardrobe departments.

In this department, the production designer is mainly involved in decorating the sets, making props, and setting up the lighting.

Cinematographers Department

The cinematic department comes to the frontline to give the shots and the lit music video final touches. In this, the head of the department is also known as the director of photography.

Director of photography

He mainly decides how the shots and the music video footage look. The main action is to handle the lightning and interact with the lights with the environment and the characters. He should build relationships with each other for better illusions.

Director’s monitor

The director’s monitor is the screen that displays a live shoot and filming of everything happening on camera. It mainly gives each take’s exact position and views for coordinating with the director and the DP.

Due to this, they can change the direction and the setup wherever they want and whenever they want.

Camera operators

To operate the camera, the DPs are not involved, but there is a specific job of the camera operators, which handle the shots and moves according to the director’s directions. There are also 1st and 2nd Assistant Cameras (AC) with the camera operators.

1st Assistant Camera

The duty of the 1st AC is to focus on the required target, pulling, swapping the lenses from the camera. He is ensuring that the camera is all set and workable on the shoot day without any trouble.

2nd Assistant Camera

The 2nd AC has to consider the slates of the shots, place exact locations and markers for the characters, and give exposed footage to save for the backup.

Gaffers and key grip

Gaffers and key grip have their own teams for maintaining the lighting and grip work assigned by the DP according to the creative plans.

Digital media technician

It is essential to get the backup of footage of every shot. If you are working on a large scale, the backup planner is recognized as the Digital Media Technician (DMT).

DMT will handle the exposed footage, which Digital Memory Card will do with tapes denoting the card’s number. Make sure to make two backups of the footage to prevent any trouble.

Note: Making two copies for the backup will reduce the risk of corrupted files and physical accidents of losing the footage.

Additional Roles

If you are the music video director, you need a Cinematographer with Camera Operators. He will be in charge of pulling and adjusting all the camera alignments. If you have enough budget, go with the co-producer to help you direct the talents.

To make your subject looks good and modern according to the theme, you should hire hair and makeup artist. If you have more budget, you can do it professionally with more and more crew members.

Conclusion

If you are a starter, then there is no need to worry to pull-off all the roles in a crew; you just need two to three people for the start-up. That’s all about the large production, but whenever you scale up, you should know how to manage all the members with their required areas.

Also read: