The Complete Manual of Sound Control: Enhancing Your Live Stream with OBS Ducking

How to Balance Your Stream Sound with OBS Audio Ducking?

Benjamin Arango

Oct 26, 2023• Proven solutions

Video making or filmmaking has now come to the level where the history of imperfections faded away a long time ago. Yes, while the animation is still ruling the floor, an inevitable back-end process might look off-screen and a little complicated. One such job is ducking sound that is the process of balancing voiceover and the background audio. If you aren’t a tech-savvy person, I hope to go in-depth isn’t needed, and hence we stop here. To depict how you need to work out this ducking music process, we have this post.

If you are a content creator, maybe you will be familiar with coordinating the right audio with the video. If not, it isn’t a problem anymore as I have included a detailed guide of implementing audio ducking in a step-wise way. With primary importance to the popular software OBS followed by a suitable alternative, let’s begin our article!

Part 1: How to Balance Your Stream Sound with OBS Audio Ducking?

OBS (Open Broadcaster Software) is free and open-source software reliable for Windows, Linux, and macOS 10.13+. With countless features like real video/audio capture, mixer, custom transitions, easy-to-use configurations, pre-source filters, VST plug-in support, noise suppression, and a lot more, you can accomplish audio ducking in OBS by adding a sidechain/ducking compression filter. Thus, perform OBS audio ducking in a clean manner by lowering the audio automatically once OBS detects audio on the other audio source.

Does this magic of OBS audio ducking seem new to you? It will not be anymore as the below step-by-step manual will guide you through the process.

Step 1: Add video files

Launch the OBS software on your system, and import the files into the workspace with the “File” menu. If you need to add voiceover from your microphone, you can click the “Start Recording” option under the main interface’s control section.

If the video plays on VLC in the background, it will appear on the mixer column.

Step 2: Choose filter and compressor

On the Settings icon next to the streaming video, click on it, and choose the “Filters” option from the drop-down.

You will reach the pop-up of the “Filters for Desktop Audio” whereby clicking on the “+” icon, choose the compressor option.

On the space bar, enter a name for the filter. For example, for ducking music, specify as “ducking,” and press “OK.”

Step 3: Change the parameters

You can now specify the values of the ratio, threshold, attack, release, output gain, and the ducking source, for example, “Mic” for microphone voiceover addition.

It’s complete. Yes, OBS audio ducking is over. Now you can check the video and alter the parameters if required after a preview.

Part 2: The Best Audio Ducking Alternative to OBS

Although OBS is preferable for being an open-source and free option with comprehensive abilities in video recording and live streaming strategies, the OBS ducking interface might seem a little unfriendly, making it difficult for newbies. Hence, we have come up with Wondershare Filmora in this session as the best alternative to Streamlabs OBS audio ducking. With an intuitive easy-to-use interface, and attractive video/audio features, Filmora stands as the recommended choice for professionals and beginners!

Developed for the inspired, Filmora follows its unique way of ducking sound, easy to handle for travel Vlogs, makeup tutorials, video lectures, presentations, and so on. Going through the below feature set can reveal why is Filmora is better than OBS.

• With simple steps, you can perform audio ducking in just on a single scale to attain the right audio balance on your video without complication.
• Get access to other in-built options like noise remover, after effects; fade in/out, equalizer, keyframing, and so on.
• Perfect your audio to the video along with tons of features like an audio mixer along with options like mute, detach, split, and background removal.
• Add voiceover, sprinkle magic with filters, detect beat, and create markers easily with Wondershare Filmora.

How to use the audio ducking feature in Wondershare Filmora?

Download and install Wondershare Filmora by clicking on the Try It Free button above. Once installed, follow the steps below.

Step 1: Launch the application

Open or launch the Wondershare Filmora application and choose “New Project“ or open the existing project from the primary dashboard.

Step 2: Import the video into the timeline

Drag the video file to which you need to balance the stream sound.

Another option to bring the video file into the timeline is by executing “File> Import Media> Import Media Files”.

Step 3: Ducking sound in the video

Select the clips with dialogue, whereby right-clicking or double-clicking on them, choose the “Adjust Audio” option.

On the following audio editing window, tick the “Lower the volume of other clips“ option to reduce background music or any other media volume.

Conclusion

I hope you have now come to know why ducking sound is a must and how well Streamlabs OBS and Wondershare Filmora carry out the job. Lastly, with the step-by-step guide to accomplish audio ducking with both the software, we can conclude that OBS performance is better, whereas Wondershare Filmora is the best choice in terms of interface and features!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Video making or filmmaking has now come to the level where the history of imperfections faded away a long time ago. Yes, while the animation is still ruling the floor, an inevitable back-end process might look off-screen and a little complicated. One such job is ducking sound that is the process of balancing voiceover and the background audio. If you aren’t a tech-savvy person, I hope to go in-depth isn’t needed, and hence we stop here. To depict how you need to work out this ducking music process, we have this post.

If you are a content creator, maybe you will be familiar with coordinating the right audio with the video. If not, it isn’t a problem anymore as I have included a detailed guide of implementing audio ducking in a step-wise way. With primary importance to the popular software OBS followed by a suitable alternative, let’s begin our article!

Part 1: How to Balance Your Stream Sound with OBS Audio Ducking?

OBS (Open Broadcaster Software) is free and open-source software reliable for Windows, Linux, and macOS 10.13+. With countless features like real video/audio capture, mixer, custom transitions, easy-to-use configurations, pre-source filters, VST plug-in support, noise suppression, and a lot more, you can accomplish audio ducking in OBS by adding a sidechain/ducking compression filter. Thus, perform OBS audio ducking in a clean manner by lowering the audio automatically once OBS detects audio on the other audio source.

Does this magic of OBS audio ducking seem new to you? It will not be anymore as the below step-by-step manual will guide you through the process.

Step 1: Add video files

Launch the OBS software on your system, and import the files into the workspace with the “File” menu. If you need to add voiceover from your microphone, you can click the “Start Recording” option under the main interface’s control section.

If the video plays on VLC in the background, it will appear on the mixer column.

Step 2: Choose filter and compressor

On the Settings icon next to the streaming video, click on it, and choose the “Filters” option from the drop-down.

You will reach the pop-up of the “Filters for Desktop Audio” whereby clicking on the “+” icon, choose the compressor option.

On the space bar, enter a name for the filter. For example, for ducking music, specify as “ducking,” and press “OK.”

Step 3: Change the parameters

You can now specify the values of the ratio, threshold, attack, release, output gain, and the ducking source, for example, “Mic” for microphone voiceover addition.

It’s complete. Yes, OBS audio ducking is over. Now you can check the video and alter the parameters if required after a preview.

Part 2: The Best Audio Ducking Alternative to OBS

Although OBS is preferable for being an open-source and free option with comprehensive abilities in video recording and live streaming strategies, the OBS ducking interface might seem a little unfriendly, making it difficult for newbies. Hence, we have come up with Wondershare Filmora in this session as the best alternative to Streamlabs OBS audio ducking. With an intuitive easy-to-use interface, and attractive video/audio features, Filmora stands as the recommended choice for professionals and beginners!

Developed for the inspired, Filmora follows its unique way of ducking sound, easy to handle for travel Vlogs, makeup tutorials, video lectures, presentations, and so on. Going through the below feature set can reveal why is Filmora is better than OBS.

• With simple steps, you can perform audio ducking in just on a single scale to attain the right audio balance on your video without complication.
• Get access to other in-built options like noise remover, after effects; fade in/out, equalizer, keyframing, and so on.
• Perfect your audio to the video along with tons of features like an audio mixer along with options like mute, detach, split, and background removal.
• Add voiceover, sprinkle magic with filters, detect beat, and create markers easily with Wondershare Filmora.

How to use the audio ducking feature in Wondershare Filmora?

Download and install Wondershare Filmora by clicking on the Try It Free button above. Once installed, follow the steps below.

Step 1: Launch the application

Open or launch the Wondershare Filmora application and choose “New Project“ or open the existing project from the primary dashboard.

Step 2: Import the video into the timeline

Drag the video file to which you need to balance the stream sound.

Another option to bring the video file into the timeline is by executing “File> Import Media> Import Media Files”.

Step 3: Ducking sound in the video

Select the clips with dialogue, whereby right-clicking or double-clicking on them, choose the “Adjust Audio” option.

On the following audio editing window, tick the “Lower the volume of other clips“ option to reduce background music or any other media volume.

Conclusion

I hope you have now come to know why ducking sound is a must and how well Streamlabs OBS and Wondershare Filmora carry out the job. Lastly, with the step-by-step guide to accomplish audio ducking with both the software, we can conclude that OBS performance is better, whereas Wondershare Filmora is the best choice in terms of interface and features!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Video making or filmmaking has now come to the level where the history of imperfections faded away a long time ago. Yes, while the animation is still ruling the floor, an inevitable back-end process might look off-screen and a little complicated. One such job is ducking sound that is the process of balancing voiceover and the background audio. If you aren’t a tech-savvy person, I hope to go in-depth isn’t needed, and hence we stop here. To depict how you need to work out this ducking music process, we have this post.

If you are a content creator, maybe you will be familiar with coordinating the right audio with the video. If not, it isn’t a problem anymore as I have included a detailed guide of implementing audio ducking in a step-wise way. With primary importance to the popular software OBS followed by a suitable alternative, let’s begin our article!

Part 1: How to Balance Your Stream Sound with OBS Audio Ducking?

OBS (Open Broadcaster Software) is free and open-source software reliable for Windows, Linux, and macOS 10.13+. With countless features like real video/audio capture, mixer, custom transitions, easy-to-use configurations, pre-source filters, VST plug-in support, noise suppression, and a lot more, you can accomplish audio ducking in OBS by adding a sidechain/ducking compression filter. Thus, perform OBS audio ducking in a clean manner by lowering the audio automatically once OBS detects audio on the other audio source.

Does this magic of OBS audio ducking seem new to you? It will not be anymore as the below step-by-step manual will guide you through the process.

Step 1: Add video files

Launch the OBS software on your system, and import the files into the workspace with the “File” menu. If you need to add voiceover from your microphone, you can click the “Start Recording” option under the main interface’s control section.

If the video plays on VLC in the background, it will appear on the mixer column.

Step 2: Choose filter and compressor

On the Settings icon next to the streaming video, click on it, and choose the “Filters” option from the drop-down.

You will reach the pop-up of the “Filters for Desktop Audio” whereby clicking on the “+” icon, choose the compressor option.

On the space bar, enter a name for the filter. For example, for ducking music, specify as “ducking,” and press “OK.”

Step 3: Change the parameters

You can now specify the values of the ratio, threshold, attack, release, output gain, and the ducking source, for example, “Mic” for microphone voiceover addition.

It’s complete. Yes, OBS audio ducking is over. Now you can check the video and alter the parameters if required after a preview.

Part 2: The Best Audio Ducking Alternative to OBS

Although OBS is preferable for being an open-source and free option with comprehensive abilities in video recording and live streaming strategies, the OBS ducking interface might seem a little unfriendly, making it difficult for newbies. Hence, we have come up with Wondershare Filmora in this session as the best alternative to Streamlabs OBS audio ducking. With an intuitive easy-to-use interface, and attractive video/audio features, Filmora stands as the recommended choice for professionals and beginners!

Developed for the inspired, Filmora follows its unique way of ducking sound, easy to handle for travel Vlogs, makeup tutorials, video lectures, presentations, and so on. Going through the below feature set can reveal why is Filmora is better than OBS.

• With simple steps, you can perform audio ducking in just on a single scale to attain the right audio balance on your video without complication.
• Get access to other in-built options like noise remover, after effects; fade in/out, equalizer, keyframing, and so on.
• Perfect your audio to the video along with tons of features like an audio mixer along with options like mute, detach, split, and background removal.
• Add voiceover, sprinkle magic with filters, detect beat, and create markers easily with Wondershare Filmora.

How to use the audio ducking feature in Wondershare Filmora?

Download and install Wondershare Filmora by clicking on the Try It Free button above. Once installed, follow the steps below.

Step 1: Launch the application

Open or launch the Wondershare Filmora application and choose “New Project“ or open the existing project from the primary dashboard.

Step 2: Import the video into the timeline

Drag the video file to which you need to balance the stream sound.

Another option to bring the video file into the timeline is by executing “File> Import Media> Import Media Files”.

Step 3: Ducking sound in the video

Select the clips with dialogue, whereby right-clicking or double-clicking on them, choose the “Adjust Audio” option.

On the following audio editing window, tick the “Lower the volume of other clips“ option to reduce background music or any other media volume.

Conclusion

I hope you have now come to know why ducking sound is a must and how well Streamlabs OBS and Wondershare Filmora carry out the job. Lastly, with the step-by-step guide to accomplish audio ducking with both the software, we can conclude that OBS performance is better, whereas Wondershare Filmora is the best choice in terms of interface and features!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Video making or filmmaking has now come to the level where the history of imperfections faded away a long time ago. Yes, while the animation is still ruling the floor, an inevitable back-end process might look off-screen and a little complicated. One such job is ducking sound that is the process of balancing voiceover and the background audio. If you aren’t a tech-savvy person, I hope to go in-depth isn’t needed, and hence we stop here. To depict how you need to work out this ducking music process, we have this post.

If you are a content creator, maybe you will be familiar with coordinating the right audio with the video. If not, it isn’t a problem anymore as I have included a detailed guide of implementing audio ducking in a step-wise way. With primary importance to the popular software OBS followed by a suitable alternative, let’s begin our article!

Part 1: How to Balance Your Stream Sound with OBS Audio Ducking?

OBS (Open Broadcaster Software) is free and open-source software reliable for Windows, Linux, and macOS 10.13+. With countless features like real video/audio capture, mixer, custom transitions, easy-to-use configurations, pre-source filters, VST plug-in support, noise suppression, and a lot more, you can accomplish audio ducking in OBS by adding a sidechain/ducking compression filter. Thus, perform OBS audio ducking in a clean manner by lowering the audio automatically once OBS detects audio on the other audio source.

Does this magic of OBS audio ducking seem new to you? It will not be anymore as the below step-by-step manual will guide you through the process.

Step 1: Add video files

Launch the OBS software on your system, and import the files into the workspace with the “File” menu. If you need to add voiceover from your microphone, you can click the “Start Recording” option under the main interface’s control section.

If the video plays on VLC in the background, it will appear on the mixer column.

Step 2: Choose filter and compressor

On the Settings icon next to the streaming video, click on it, and choose the “Filters” option from the drop-down.

You will reach the pop-up of the “Filters for Desktop Audio” whereby clicking on the “+” icon, choose the compressor option.

On the space bar, enter a name for the filter. For example, for ducking music, specify as “ducking,” and press “OK.”

Step 3: Change the parameters

You can now specify the values of the ratio, threshold, attack, release, output gain, and the ducking source, for example, “Mic” for microphone voiceover addition.

It’s complete. Yes, OBS audio ducking is over. Now you can check the video and alter the parameters if required after a preview.

Part 2: The Best Audio Ducking Alternative to OBS

Although OBS is preferable for being an open-source and free option with comprehensive abilities in video recording and live streaming strategies, the OBS ducking interface might seem a little unfriendly, making it difficult for newbies. Hence, we have come up with Wondershare Filmora in this session as the best alternative to Streamlabs OBS audio ducking. With an intuitive easy-to-use interface, and attractive video/audio features, Filmora stands as the recommended choice for professionals and beginners!

Developed for the inspired, Filmora follows its unique way of ducking sound, easy to handle for travel Vlogs, makeup tutorials, video lectures, presentations, and so on. Going through the below feature set can reveal why is Filmora is better than OBS.

• With simple steps, you can perform audio ducking in just on a single scale to attain the right audio balance on your video without complication.
• Get access to other in-built options like noise remover, after effects; fade in/out, equalizer, keyframing, and so on.
• Perfect your audio to the video along with tons of features like an audio mixer along with options like mute, detach, split, and background removal.
• Add voiceover, sprinkle magic with filters, detect beat, and create markers easily with Wondershare Filmora.

How to use the audio ducking feature in Wondershare Filmora?

Download and install Wondershare Filmora by clicking on the Try It Free button above. Once installed, follow the steps below.

Step 1: Launch the application

Open or launch the Wondershare Filmora application and choose “New Project“ or open the existing project from the primary dashboard.

Step 2: Import the video into the timeline

Drag the video file to which you need to balance the stream sound.

Another option to bring the video file into the timeline is by executing “File> Import Media> Import Media Files”.

Step 3: Ducking sound in the video

Select the clips with dialogue, whereby right-clicking or double-clicking on them, choose the “Adjust Audio” option.

On the following audio editing window, tick the “Lower the volume of other clips“ option to reduce background music or any other media volume.

Conclusion

I hope you have now come to know why ducking sound is a must and how well Streamlabs OBS and Wondershare Filmora carry out the job. Lastly, with the step-by-step guide to accomplish audio ducking with both the software, we can conclude that OBS performance is better, whereas Wondershare Filmora is the best choice in terms of interface and features!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Tips to Add Audio to Video in Premiere Pro

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Look at any of the spot commercials, wedding videos, or even some family candid videos. Adding audio makes them appealing and likable. To catch a potential customer or create an emotional connection with the viewer combination of audio and video is a must. This makes the footage attractive and exceptional.

Read on to know more about the step-by-step approach how to add audio to video in Adobe Premiere Pro.

In this article

01 [How to add audio to video in Premiere Pro](#Part 1)

02 [How to adjust audio in Premiere Pro](#Part 2)

03 [Adding Audio to Video files](#Part 3)

Part 1 How to add audio to video in Premiere Pro

Some essential pointers for all would-be videographers are:

● Before you add audio to video in Premiere Pro, be ready to see your file size increase to a large extent. If you add a background score of 15MB, your total video file size will increase by the same amount of 15MB. The best way to take care of such a problem is to use additional compression techniques to get a suitable file size.

● Most videographers use lots of software tools to add audio to video professionally. One such trending software tool is the Adobe Premiere Pro. Its simple to add audio to video in Premiere Pro, edit your audio and video, and fine-tune the audio volume of each video project.

Let’s learn how.

Step1 Find out the Audio option

Navigate to the Audio workspace, select Audio at the top on the tools bar

Step2 Choose the Workspace

Click Window select Workspace click on Audio

Step3 Check toolbar

Within Audio, click on Choose Window Media Browser to show the Media Browser toolbar.

Step4 Select audio files

Go to your audio file; for Windows OS, right-click or control-click the selected audio file for macOS.

Step5 Import and add

Please select the desired audio file, then click import to add it to your Project.

An important tip is to keep the Ingest box selected if you want to copy your audio file concurrently to your project folder.

Adding audio to your series

Step1 Go to the Project panel

Select Window, click on Project to open the Project panel.

Step2 Select audio file

Click on the audio file you imported to select it.

Step3 Check the waveform

Double click the file to open it in the Source panel to check the sound and waveform.

Step4 Check sounds

Play the audio file if you want to check the audio quality, volume, and overall sound.

Step5 Add audio to the video track

Hold the left click on your mouse to drag the audio file to the series in the Timeline panel. You can add any audio file to the video track listed in the panel window in this step.

Step6 Trim audio file

Select the Trim option to trim your audio file the same way you will edit the video file in the final step.

Part 2 How to adjust audio in Premiere Pro

Now that you have understood how to add audio to video in Adobe Premier Pro. Let’s know how to adjust audio in Premier Pro.

Step1 Activate the series

Press on the spacebar to activate your series in the Program panel (appears in the top right of the panel)

Step2 Stop playback

To stop the playback, press the space bar again.

Step3 Choose starting point of playback

Press down the left mouse button to hold and drag the Blue colored play head to wherever you desire the playback to start.

If you feel the audio track is mild or too harsh compared to the rest of the audio series, change each audio track’s volume separately.

Step1 Select Audio Track Mixer

Click Window selects Audio Track Mixer from the menu.

Step2 Click the series name to see the audio mixer

Click the series name of your audio file to show the audio mixer for your series.

Step3 Choose playback to play the audio

At the bottom of the panel is the Audio Track Mixer. Click on playback to star, pause or play your audio in-ring sequence.

Step4 Click on the slider

When your audio file plays or loops, click on the slider to move up or down. It will increase or reduce the volume of each separate audio track in your audio series.

Step5 Adjust the volume

Use the slider to adjust the overall audio volume

Tips

Always keep the audio projects within the -6 to 3 dB volume range to get the best quality of the audio effect. Any lower you won’t be able to hear the sound, or if it’s higher, the sound will hurt the listeners’ ears.

Professional advice to all beginner-level videographers is that as Premiere Pro is complex so you need more straightforward tools like Filmora for all your video editing work. Filmora is easy to use and much cheaper than Premiere Pro.

You may think now why or how Filmora can be the best as an alternative on how to add audio to video using Premiere Pro. Well! It will help you to transform your video into a piece of art incredibly by offering simple drag and drop options, including an easy-to-use interface and powerful editing tools. You can:

● Edit and create your videos with minimal effort

● Get a Music Library to add comedy, fear, tension, and love to every scene

● Get several royalty-free songs and sound effects

● Create videos with up to 800 stunning effects

● Unleash your creativity with its offered Hollywood effects

● Import and export in almost any type of video format

How to use Filmora to add audio to video

Adding sound to any video file enhances its viewability and the whole experience of watching any video. To do this, you need to add audio to video. The same can be done quickly in Filmora, a 3rd-party video editing software tool now the hot favorite of amateur and professional video editors. Below we describe how to add audio to video in Filmora.

Import Media

To start the process of adding audio to video follow these steps.

Step1 Select the audio, add using the Import option or drag and select

Import selected audio using the Filmora Media Panel and add it to your timeline. You can also choose and drag the audio file from the source folder to the Media Panel. Filmora supports multiple audio file formats to ease adding audio to video. The supported audio files are MP3, M4V, MPA, WAV, WMA.

Step2 Add and make the audio file

Adding the audio file to Filmora Media Panel makes it a media asset and can now be used multiple times in future projects. The original file remains as Filmora doesn’t change the original audio file.

Step3 Copying or deleting an audio file

In Filmora, using the feature of copying or deleting an audio file, you can work on the audio and video from any computer or remote PC.

Part 3 Adding Audio to Video files

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Step1 Click on Import in the Media Panel

Select the audio and video files to import them into Filmora.

Step2 Click on the video file to add audio

Press the Ctrl key (Windows) or Cmd key (Mac OS) and click on the audio file.

Step3 Add audio to video

Right-click on the files selected and choose the Merge audio & video option to add audio to the video.

Filmora analyzes audio and video files and replaces the existing audio with the newly selected audio file. Once the synchronization process is over, the new merged file will be available in the Media Panel for future processing.

The synchronized file will have the same terminology as the original video file with a difference. It will get an extension Merged to its name.

The original file will not get affected in Filmora. This software tool only references the files to generate a new file. The new file created when you add audio to the video can now be added to the timeline and exported.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

So, this article listed how to add audio to video in Premiere Pro via a step-by-step guide. The guide lets you know the easy method of adding audio to video in Adobe Premiere Pro to all potential videographers. Thus, you can now start your journey of video edition by putting your best click forward!

Try It Free Try It Free

Look at any of the spot commercials, wedding videos, or even some family candid videos. Adding audio makes them appealing and likable. To catch a potential customer or create an emotional connection with the viewer combination of audio and video is a must. This makes the footage attractive and exceptional.

Read on to know more about the step-by-step approach how to add audio to video in Adobe Premiere Pro.

In this article

01 [How to add audio to video in Premiere Pro](#Part 1)

02 [How to adjust audio in Premiere Pro](#Part 2)

03 [Adding Audio to Video files](#Part 3)

Part 1 How to add audio to video in Premiere Pro

Some essential pointers for all would-be videographers are:

● Before you add audio to video in Premiere Pro, be ready to see your file size increase to a large extent. If you add a background score of 15MB, your total video file size will increase by the same amount of 15MB. The best way to take care of such a problem is to use additional compression techniques to get a suitable file size.

● Most videographers use lots of software tools to add audio to video professionally. One such trending software tool is the Adobe Premiere Pro. Its simple to add audio to video in Premiere Pro, edit your audio and video, and fine-tune the audio volume of each video project.

Let’s learn how.

Step1 Find out the Audio option

Navigate to the Audio workspace, select Audio at the top on the tools bar

Step2 Choose the Workspace

Click Window select Workspace click on Audio

Step3 Check toolbar

Within Audio, click on Choose Window Media Browser to show the Media Browser toolbar.

Step4 Select audio files

Go to your audio file; for Windows OS, right-click or control-click the selected audio file for macOS.

Step5 Import and add

Please select the desired audio file, then click import to add it to your Project.

An important tip is to keep the Ingest box selected if you want to copy your audio file concurrently to your project folder.

Adding audio to your series

Step1 Go to the Project panel

Select Window, click on Project to open the Project panel.

Step2 Select audio file

Click on the audio file you imported to select it.

Step3 Check the waveform

Double click the file to open it in the Source panel to check the sound and waveform.

Step4 Check sounds

Play the audio file if you want to check the audio quality, volume, and overall sound.

Step5 Add audio to the video track

Hold the left click on your mouse to drag the audio file to the series in the Timeline panel. You can add any audio file to the video track listed in the panel window in this step.

Step6 Trim audio file

Select the Trim option to trim your audio file the same way you will edit the video file in the final step.

Part 2 How to adjust audio in Premiere Pro

Now that you have understood how to add audio to video in Adobe Premier Pro. Let’s know how to adjust audio in Premier Pro.

Step1 Activate the series

Press on the spacebar to activate your series in the Program panel (appears in the top right of the panel)

Step2 Stop playback

To stop the playback, press the space bar again.

Step3 Choose starting point of playback

Press down the left mouse button to hold and drag the Blue colored play head to wherever you desire the playback to start.

If you feel the audio track is mild or too harsh compared to the rest of the audio series, change each audio track’s volume separately.

Step1 Select Audio Track Mixer

Click Window selects Audio Track Mixer from the menu.

Step2 Click the series name to see the audio mixer

Click the series name of your audio file to show the audio mixer for your series.

Step3 Choose playback to play the audio

At the bottom of the panel is the Audio Track Mixer. Click on playback to star, pause or play your audio in-ring sequence.

Step4 Click on the slider

When your audio file plays or loops, click on the slider to move up or down. It will increase or reduce the volume of each separate audio track in your audio series.

Step5 Adjust the volume

Use the slider to adjust the overall audio volume

Tips

Always keep the audio projects within the -6 to 3 dB volume range to get the best quality of the audio effect. Any lower you won’t be able to hear the sound, or if it’s higher, the sound will hurt the listeners’ ears.

Professional advice to all beginner-level videographers is that as Premiere Pro is complex so you need more straightforward tools like Filmora for all your video editing work. Filmora is easy to use and much cheaper than Premiere Pro.

You may think now why or how Filmora can be the best as an alternative on how to add audio to video using Premiere Pro. Well! It will help you to transform your video into a piece of art incredibly by offering simple drag and drop options, including an easy-to-use interface and powerful editing tools. You can:

● Edit and create your videos with minimal effort

● Get a Music Library to add comedy, fear, tension, and love to every scene

● Get several royalty-free songs and sound effects

● Create videos with up to 800 stunning effects

● Unleash your creativity with its offered Hollywood effects

● Import and export in almost any type of video format

How to use Filmora to add audio to video

Adding sound to any video file enhances its viewability and the whole experience of watching any video. To do this, you need to add audio to video. The same can be done quickly in Filmora, a 3rd-party video editing software tool now the hot favorite of amateur and professional video editors. Below we describe how to add audio to video in Filmora.

Import Media

To start the process of adding audio to video follow these steps.

Step1 Select the audio, add using the Import option or drag and select

Import selected audio using the Filmora Media Panel and add it to your timeline. You can also choose and drag the audio file from the source folder to the Media Panel. Filmora supports multiple audio file formats to ease adding audio to video. The supported audio files are MP3, M4V, MPA, WAV, WMA.

Step2 Add and make the audio file

Adding the audio file to Filmora Media Panel makes it a media asset and can now be used multiple times in future projects. The original file remains as Filmora doesn’t change the original audio file.

Step3 Copying or deleting an audio file

In Filmora, using the feature of copying or deleting an audio file, you can work on the audio and video from any computer or remote PC.

Part 3 Adding Audio to Video files

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Step1 Click on Import in the Media Panel

Select the audio and video files to import them into Filmora.

Step2 Click on the video file to add audio

Press the Ctrl key (Windows) or Cmd key (Mac OS) and click on the audio file.

Step3 Add audio to video

Right-click on the files selected and choose the Merge audio & video option to add audio to the video.

Filmora analyzes audio and video files and replaces the existing audio with the newly selected audio file. Once the synchronization process is over, the new merged file will be available in the Media Panel for future processing.

The synchronized file will have the same terminology as the original video file with a difference. It will get an extension Merged to its name.

The original file will not get affected in Filmora. This software tool only references the files to generate a new file. The new file created when you add audio to the video can now be added to the timeline and exported.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

So, this article listed how to add audio to video in Premiere Pro via a step-by-step guide. The guide lets you know the easy method of adding audio to video in Adobe Premiere Pro to all potential videographers. Thus, you can now start your journey of video edition by putting your best click forward!

Try It Free Try It Free

Look at any of the spot commercials, wedding videos, or even some family candid videos. Adding audio makes them appealing and likable. To catch a potential customer or create an emotional connection with the viewer combination of audio and video is a must. This makes the footage attractive and exceptional.

Read on to know more about the step-by-step approach how to add audio to video in Adobe Premiere Pro.

In this article

01 [How to add audio to video in Premiere Pro](#Part 1)

02 [How to adjust audio in Premiere Pro](#Part 2)

03 [Adding Audio to Video files](#Part 3)

Part 1 How to add audio to video in Premiere Pro

Some essential pointers for all would-be videographers are:

● Before you add audio to video in Premiere Pro, be ready to see your file size increase to a large extent. If you add a background score of 15MB, your total video file size will increase by the same amount of 15MB. The best way to take care of such a problem is to use additional compression techniques to get a suitable file size.

● Most videographers use lots of software tools to add audio to video professionally. One such trending software tool is the Adobe Premiere Pro. Its simple to add audio to video in Premiere Pro, edit your audio and video, and fine-tune the audio volume of each video project.

Let’s learn how.

Step1 Find out the Audio option

Navigate to the Audio workspace, select Audio at the top on the tools bar

Step2 Choose the Workspace

Click Window select Workspace click on Audio

Step3 Check toolbar

Within Audio, click on Choose Window Media Browser to show the Media Browser toolbar.

Step4 Select audio files

Go to your audio file; for Windows OS, right-click or control-click the selected audio file for macOS.

Step5 Import and add

Please select the desired audio file, then click import to add it to your Project.

An important tip is to keep the Ingest box selected if you want to copy your audio file concurrently to your project folder.

Adding audio to your series

Step1 Go to the Project panel

Select Window, click on Project to open the Project panel.

Step2 Select audio file

Click on the audio file you imported to select it.

Step3 Check the waveform

Double click the file to open it in the Source panel to check the sound and waveform.

Step4 Check sounds

Play the audio file if you want to check the audio quality, volume, and overall sound.

Step5 Add audio to the video track

Hold the left click on your mouse to drag the audio file to the series in the Timeline panel. You can add any audio file to the video track listed in the panel window in this step.

Step6 Trim audio file

Select the Trim option to trim your audio file the same way you will edit the video file in the final step.

Part 2 How to adjust audio in Premiere Pro

Now that you have understood how to add audio to video in Adobe Premier Pro. Let’s know how to adjust audio in Premier Pro.

Step1 Activate the series

Press on the spacebar to activate your series in the Program panel (appears in the top right of the panel)

Step2 Stop playback

To stop the playback, press the space bar again.

Step3 Choose starting point of playback

Press down the left mouse button to hold and drag the Blue colored play head to wherever you desire the playback to start.

If you feel the audio track is mild or too harsh compared to the rest of the audio series, change each audio track’s volume separately.

Step1 Select Audio Track Mixer

Click Window selects Audio Track Mixer from the menu.

Step2 Click the series name to see the audio mixer

Click the series name of your audio file to show the audio mixer for your series.

Step3 Choose playback to play the audio

At the bottom of the panel is the Audio Track Mixer. Click on playback to star, pause or play your audio in-ring sequence.

Step4 Click on the slider

When your audio file plays or loops, click on the slider to move up or down. It will increase or reduce the volume of each separate audio track in your audio series.

Step5 Adjust the volume

Use the slider to adjust the overall audio volume

Tips

Always keep the audio projects within the -6 to 3 dB volume range to get the best quality of the audio effect. Any lower you won’t be able to hear the sound, or if it’s higher, the sound will hurt the listeners’ ears.

Professional advice to all beginner-level videographers is that as Premiere Pro is complex so you need more straightforward tools like Filmora for all your video editing work. Filmora is easy to use and much cheaper than Premiere Pro.

You may think now why or how Filmora can be the best as an alternative on how to add audio to video using Premiere Pro. Well! It will help you to transform your video into a piece of art incredibly by offering simple drag and drop options, including an easy-to-use interface and powerful editing tools. You can:

● Edit and create your videos with minimal effort

● Get a Music Library to add comedy, fear, tension, and love to every scene

● Get several royalty-free songs and sound effects

● Create videos with up to 800 stunning effects

● Unleash your creativity with its offered Hollywood effects

● Import and export in almost any type of video format

How to use Filmora to add audio to video

Adding sound to any video file enhances its viewability and the whole experience of watching any video. To do this, you need to add audio to video. The same can be done quickly in Filmora, a 3rd-party video editing software tool now the hot favorite of amateur and professional video editors. Below we describe how to add audio to video in Filmora.

Import Media

To start the process of adding audio to video follow these steps.

Step1 Select the audio, add using the Import option or drag and select

Import selected audio using the Filmora Media Panel and add it to your timeline. You can also choose and drag the audio file from the source folder to the Media Panel. Filmora supports multiple audio file formats to ease adding audio to video. The supported audio files are MP3, M4V, MPA, WAV, WMA.

Step2 Add and make the audio file

Adding the audio file to Filmora Media Panel makes it a media asset and can now be used multiple times in future projects. The original file remains as Filmora doesn’t change the original audio file.

Step3 Copying or deleting an audio file

In Filmora, using the feature of copying or deleting an audio file, you can work on the audio and video from any computer or remote PC.

Part 3 Adding Audio to Video files

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Step1 Click on Import in the Media Panel

Select the audio and video files to import them into Filmora.

Step2 Click on the video file to add audio

Press the Ctrl key (Windows) or Cmd key (Mac OS) and click on the audio file.

Step3 Add audio to video

Right-click on the files selected and choose the Merge audio & video option to add audio to the video.

Filmora analyzes audio and video files and replaces the existing audio with the newly selected audio file. Once the synchronization process is over, the new merged file will be available in the Media Panel for future processing.

The synchronized file will have the same terminology as the original video file with a difference. It will get an extension Merged to its name.

The original file will not get affected in Filmora. This software tool only references the files to generate a new file. The new file created when you add audio to the video can now be added to the timeline and exported.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

So, this article listed how to add audio to video in Premiere Pro via a step-by-step guide. The guide lets you know the easy method of adding audio to video in Adobe Premiere Pro to all potential videographers. Thus, you can now start your journey of video edition by putting your best click forward!

Try It Free Try It Free

Look at any of the spot commercials, wedding videos, or even some family candid videos. Adding audio makes them appealing and likable. To catch a potential customer or create an emotional connection with the viewer combination of audio and video is a must. This makes the footage attractive and exceptional.

Read on to know more about the step-by-step approach how to add audio to video in Adobe Premiere Pro.

In this article

01 [How to add audio to video in Premiere Pro](#Part 1)

02 [How to adjust audio in Premiere Pro](#Part 2)

03 [Adding Audio to Video files](#Part 3)

Part 1 How to add audio to video in Premiere Pro

Some essential pointers for all would-be videographers are:

● Before you add audio to video in Premiere Pro, be ready to see your file size increase to a large extent. If you add a background score of 15MB, your total video file size will increase by the same amount of 15MB. The best way to take care of such a problem is to use additional compression techniques to get a suitable file size.

● Most videographers use lots of software tools to add audio to video professionally. One such trending software tool is the Adobe Premiere Pro. Its simple to add audio to video in Premiere Pro, edit your audio and video, and fine-tune the audio volume of each video project.

Let’s learn how.

Step1 Find out the Audio option

Navigate to the Audio workspace, select Audio at the top on the tools bar

Step2 Choose the Workspace

Click Window select Workspace click on Audio

Step3 Check toolbar

Within Audio, click on Choose Window Media Browser to show the Media Browser toolbar.

Step4 Select audio files

Go to your audio file; for Windows OS, right-click or control-click the selected audio file for macOS.

Step5 Import and add

Please select the desired audio file, then click import to add it to your Project.

An important tip is to keep the Ingest box selected if you want to copy your audio file concurrently to your project folder.

Adding audio to your series

Step1 Go to the Project panel

Select Window, click on Project to open the Project panel.

Step2 Select audio file

Click on the audio file you imported to select it.

Step3 Check the waveform

Double click the file to open it in the Source panel to check the sound and waveform.

Step4 Check sounds

Play the audio file if you want to check the audio quality, volume, and overall sound.

Step5 Add audio to the video track

Hold the left click on your mouse to drag the audio file to the series in the Timeline panel. You can add any audio file to the video track listed in the panel window in this step.

Step6 Trim audio file

Select the Trim option to trim your audio file the same way you will edit the video file in the final step.

Part 2 How to adjust audio in Premiere Pro

Now that you have understood how to add audio to video in Adobe Premier Pro. Let’s know how to adjust audio in Premier Pro.

Step1 Activate the series

Press on the spacebar to activate your series in the Program panel (appears in the top right of the panel)

Step2 Stop playback

To stop the playback, press the space bar again.

Step3 Choose starting point of playback

Press down the left mouse button to hold and drag the Blue colored play head to wherever you desire the playback to start.

If you feel the audio track is mild or too harsh compared to the rest of the audio series, change each audio track’s volume separately.

Step1 Select Audio Track Mixer

Click Window selects Audio Track Mixer from the menu.

Step2 Click the series name to see the audio mixer

Click the series name of your audio file to show the audio mixer for your series.

Step3 Choose playback to play the audio

At the bottom of the panel is the Audio Track Mixer. Click on playback to star, pause or play your audio in-ring sequence.

Step4 Click on the slider

When your audio file plays or loops, click on the slider to move up or down. It will increase or reduce the volume of each separate audio track in your audio series.

Step5 Adjust the volume

Use the slider to adjust the overall audio volume

Tips

Always keep the audio projects within the -6 to 3 dB volume range to get the best quality of the audio effect. Any lower you won’t be able to hear the sound, or if it’s higher, the sound will hurt the listeners’ ears.

Professional advice to all beginner-level videographers is that as Premiere Pro is complex so you need more straightforward tools like Filmora for all your video editing work. Filmora is easy to use and much cheaper than Premiere Pro.

You may think now why or how Filmora can be the best as an alternative on how to add audio to video using Premiere Pro. Well! It will help you to transform your video into a piece of art incredibly by offering simple drag and drop options, including an easy-to-use interface and powerful editing tools. You can:

● Edit and create your videos with minimal effort

● Get a Music Library to add comedy, fear, tension, and love to every scene

● Get several royalty-free songs and sound effects

● Create videos with up to 800 stunning effects

● Unleash your creativity with its offered Hollywood effects

● Import and export in almost any type of video format

How to use Filmora to add audio to video

Adding sound to any video file enhances its viewability and the whole experience of watching any video. To do this, you need to add audio to video. The same can be done quickly in Filmora, a 3rd-party video editing software tool now the hot favorite of amateur and professional video editors. Below we describe how to add audio to video in Filmora.

Import Media

To start the process of adding audio to video follow these steps.

Step1 Select the audio, add using the Import option or drag and select

Import selected audio using the Filmora Media Panel and add it to your timeline. You can also choose and drag the audio file from the source folder to the Media Panel. Filmora supports multiple audio file formats to ease adding audio to video. The supported audio files are MP3, M4V, MPA, WAV, WMA.

Step2 Add and make the audio file

Adding the audio file to Filmora Media Panel makes it a media asset and can now be used multiple times in future projects. The original file remains as Filmora doesn’t change the original audio file.

Step3 Copying or deleting an audio file

In Filmora, using the feature of copying or deleting an audio file, you can work on the audio and video from any computer or remote PC.

Part 3 Adding Audio to Video files

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Step1 Click on Import in the Media Panel

Select the audio and video files to import them into Filmora.

Step2 Click on the video file to add audio

Press the Ctrl key (Windows) or Cmd key (Mac OS) and click on the audio file.

Step3 Add audio to video

Right-click on the files selected and choose the Merge audio & video option to add audio to the video.

Filmora analyzes audio and video files and replaces the existing audio with the newly selected audio file. Once the synchronization process is over, the new merged file will be available in the Media Panel for future processing.

The synchronized file will have the same terminology as the original video file with a difference. It will get an extension Merged to its name.

The original file will not get affected in Filmora. This software tool only references the files to generate a new file. The new file created when you add audio to the video can now be added to the timeline and exported.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

So, this article listed how to add audio to video in Premiere Pro via a step-by-step guide. The guide lets you know the easy method of adding audio to video in Adobe Premiere Pro to all potential videographers. Thus, you can now start your journey of video edition by putting your best click forward!

From Recording Studio to Playlist: Exporting Audacity Audio to High-Quality MP3

All of us have had to convert certain audio files, such as music, recordings, and the soundtrack of a film, to a different format at some point in our lives. It doesn’t matter what the situation is when it comes to dependable conversion. There are so many gadgets in the current world, such as mobile phones and iPods, and the DVD player, that we need to clarify the goal output format. Audacity mp3 is an excellent audio file format since it can be played on any device. Here, we’ll show you two different ways to convert an audacity audio recording file to an MP3 format.

How to Use Wondershare UniConverter For Audacity to mp3 converter

A video converter that can do it all: burn DVDs, save online films from video sharing sites, edit videos to your taste, and more. The easiest way to convert an audacity audio recording file to an MP3(audacity mp3) is by using Wondershare UniConverter. It can convert video to more than a thousand different formats. In addition, Wondershare UniConverter offers 30X quicker performance than any other program when converting aup3 to mp3(audacity mp3).

Step-by-step instructions on how to export aup3 to mp3 may be found here.

1.Launch audacity to mp3 converter (Uniconverter) on the computer

It’s as simple as downloading Wondershare UniConverter and following on-screen directions to finish the installation and then launching it.

2.Load Audacity file into Uniconverter

Navigate to the Converter section at the top of the screen and click the Add files button to browse your target Audacity files on your computer. Finally, click the Open button to ensure that the Audacity files have been successfully added to the application.

3.Choose output as MP3

Now, choose Output Format from the drop-down menu to see all possible formats. Select the audacity audio recording tab & Audacity mp3 as the output format from the drop-down menu. You may now convert aup3 to mp3 or Audacity mp3 format.

4.Convert Audacity Files to MP3 in just one click

Press the Start All button to begin converting aup3 to mp3. Once the conversion is complete, you may go to the Finished page to access the MP3 files that have been converted.

Using the LAME Library to Convert Audacity Files to MP3 format

What is the best course of action? Aside from those mentioned above simple Wondershare technique, we recommend converting aup3 to mp3 using the LAME library, which can be found in the LAME library. In case you don’t know, audacity seems to be a free multiplatform computer tool that can be used to record and edit audio and convert files to MP3 format. If it is compatible with the LAME library, which is an MP3 encoder, it will enable you to export Audacity files as MP3. The conversion method generally consists of downloading the LAME library & converting the Audacity file to MP3 2 characteristics using the LAME library.

Note:

• Audacity does not have the ability to immediately encode or save Audacity files; you must first download and install the LAME library.

1.Download LAME Library

• To download the appropriate version of LAME, go to the LAME library website & choose your computer system from the drop-down menu, then click Open.

• Now choose the location where you want the file stored & click on Save to begin the download. You may also rename the file, but keep in mind that this sort of file is a compressed folder, so it’s best to preserve it in its original format.

• When the downloading process is complete, just unzip the files as you would normally.

Tips: Alternatively, if you’re using Windows Vista, we suggest that you open the file in the explorer window, select it, and then click on Extract All Files from the command bar to see the contents of the extracted folder.

2.Converting Audacity files to MP3 format

Step 1: Due to the fact that this is your first time using audacity, you will be prompted to identify the location where you have stored the LAME library file.

Select file> Export as MP3 from the menu bar and select where you want to save the file in audacity.

Step 2: Then, choose where you want to store your file & rename it any way you like; now, leave Save as type: MP3 files as the only option available.

Step 3: After clicking on Save, you will be presented with a dialogue asking for your permission; choose Yes to start with the process of saving Audacity files as MP3.

Step 4: You must open the MP3 file in audacity and modify it by adding some particular information such as the artist (optional) and selecting OK to confirm saving as MP3 in Audacity. After that, the project will be exported, transformed, and the audacity files will be saved as MP3 files.

That’s all there is to it! You should now be able to export aup3 to mp3 format. But because of patent and licensing difficulties, LAME codes aren’t usually included with audacity when exporting files to Audacity mp3. LAME codes are alson’t always included when exporting files to MP3. For the sake of conclusion, after we have done editing a project in audacity, we will need to convert it to MP3 format for future convenience. However, you may download it individually for free by following the above methods. Furthermore, Wondershare UniConverter is a fantastic solution with comprehensive capabilities that can assist you in finishing your audacity audio recording projects and saving them as Audacity mp3 files in audacity, among other things.

Conclusions

It’s only natural to want to use audacity to mp3 converter audacity audio recording files since it is one of the greatest tools for editing audacity audio recording files. We also talk about the voice effects of Filmora and how the users can use filmora to change and modify the voice. Video/audio & recorded voiceover may be re-voiced using Filmora. The Pitch option is available for both video/audio files & voiceovers on the Timeline. Change the voice of a video or a recorded voiceover by using it. Here we discuss the Most important Guide to Change the Voices in Videos using Filmora. Add a voiceover or a video to your viral of. The Changing Pitch Option lets you alter your voice. Adjusting Video Speed Lets You Change Your Voice (Optional). Export the video/audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

It’s as simple as downloading Wondershare UniConverter and following on-screen directions to finish the installation and then launching it.

2.Load Audacity file into Uniconverter

Navigate to the Converter section at the top of the screen and click the Add files button to browse your target Audacity files on your computer. Finally, click the Open button to ensure that the Audacity files have been successfully added to the application.

3.Choose output as MP3

Now, choose Output Format from the drop-down menu to see all possible formats. Select the audacity audio recording tab & Audacity mp3 as the output format from the drop-down menu. You may now convert aup3 to mp3 or Audacity mp3 format.

4.Convert Audacity Files to MP3 in just one click

Press the Start All button to begin converting aup3 to mp3. Once the conversion is complete, you may go to the Finished page to access the MP3 files that have been converted.

Using the LAME Library to Convert Audacity Files to MP3 format

What is the best course of action? Aside from those mentioned above simple Wondershare technique, we recommend converting aup3 to mp3 using the LAME library, which can be found in the LAME library. In case you don’t know, audacity seems to be a free multiplatform computer tool that can be used to record and edit audio and convert files to MP3 format. If it is compatible with the LAME library, which is an MP3 encoder, it will enable you to export Audacity files as MP3. The conversion method generally consists of downloading the LAME library & converting the Audacity file to MP3 2 characteristics using the LAME library.

Note:

• Audacity does not have the ability to immediately encode or save Audacity files; you must first download and install the LAME library.

1.Download LAME Library

• To download the appropriate version of LAME, go to the LAME library website & choose your computer system from the drop-down menu, then click Open.

• Now choose the location where you want the file stored & click on Save to begin the download. You may also rename the file, but keep in mind that this sort of file is a compressed folder, so it’s best to preserve it in its original format.

• When the downloading process is complete, just unzip the files as you would normally.

Tips: Alternatively, if you’re using Windows Vista, we suggest that you open the file in the explorer window, select it, and then click on Extract All Files from the command bar to see the contents of the extracted folder.

2.Converting Audacity files to MP3 format

Step 1: Due to the fact that this is your first time using audacity, you will be prompted to identify the location where you have stored the LAME library file.

Select file> Export as MP3 from the menu bar and select where you want to save the file in audacity.

Step 2: Then, choose where you want to store your file & rename it any way you like; now, leave Save as type: MP3 files as the only option available.

Step 3: After clicking on Save, you will be presented with a dialogue asking for your permission; choose Yes to start with the process of saving Audacity files as MP3.

Step 4: You must open the MP3 file in audacity and modify it by adding some particular information such as the artist (optional) and selecting OK to confirm saving as MP3 in Audacity. After that, the project will be exported, transformed, and the audacity files will be saved as MP3 files.

That’s all there is to it! You should now be able to export aup3 to mp3 format. But because of patent and licensing difficulties, LAME codes aren’t usually included with audacity when exporting files to Audacity mp3. LAME codes are alson’t always included when exporting files to MP3. For the sake of conclusion, after we have done editing a project in audacity, we will need to convert it to MP3 format for future convenience. However, you may download it individually for free by following the above methods. Furthermore, Wondershare UniConverter is a fantastic solution with comprehensive capabilities that can assist you in finishing your audacity audio recording projects and saving them as Audacity mp3 files in audacity, among other things.

Conclusions

It’s only natural to want to use audacity to mp3 converter audacity audio recording files since it is one of the greatest tools for editing audacity audio recording files. We also talk about the voice effects of Filmora and how the users can use filmora to change and modify the voice. Video/audio & recorded voiceover may be re-voiced using Filmora. The Pitch option is available for both video/audio files & voiceovers on the Timeline. Change the voice of a video or a recorded voiceover by using it. Here we discuss the Most important Guide to Change the Voices in Videos using Filmora. Add a voiceover or a video to your viral of. The Changing Pitch Option lets you alter your voice. Adjusting Video Speed Lets You Change Your Voice (Optional). Export the video/audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

It’s as simple as downloading Wondershare UniConverter and following on-screen directions to finish the installation and then launching it.

2.Load Audacity file into Uniconverter

Navigate to the Converter section at the top of the screen and click the Add files button to browse your target Audacity files on your computer. Finally, click the Open button to ensure that the Audacity files have been successfully added to the application.

3.Choose output as MP3

Now, choose Output Format from the drop-down menu to see all possible formats. Select the audacity audio recording tab & Audacity mp3 as the output format from the drop-down menu. You may now convert aup3 to mp3 or Audacity mp3 format.

4.Convert Audacity Files to MP3 in just one click

Press the Start All button to begin converting aup3 to mp3. Once the conversion is complete, you may go to the Finished page to access the MP3 files that have been converted.

Using the LAME Library to Convert Audacity Files to MP3 format

What is the best course of action? Aside from those mentioned above simple Wondershare technique, we recommend converting aup3 to mp3 using the LAME library, which can be found in the LAME library. In case you don’t know, audacity seems to be a free multiplatform computer tool that can be used to record and edit audio and convert files to MP3 format. If it is compatible with the LAME library, which is an MP3 encoder, it will enable you to export Audacity files as MP3. The conversion method generally consists of downloading the LAME library & converting the Audacity file to MP3 2 characteristics using the LAME library.

Note:

• Audacity does not have the ability to immediately encode or save Audacity files; you must first download and install the LAME library.

1.Download LAME Library

• To download the appropriate version of LAME, go to the LAME library website & choose your computer system from the drop-down menu, then click Open.

• Now choose the location where you want the file stored & click on Save to begin the download. You may also rename the file, but keep in mind that this sort of file is a compressed folder, so it’s best to preserve it in its original format.

• When the downloading process is complete, just unzip the files as you would normally.

Tips: Alternatively, if you’re using Windows Vista, we suggest that you open the file in the explorer window, select it, and then click on Extract All Files from the command bar to see the contents of the extracted folder.

2.Converting Audacity files to MP3 format

Step 1: Due to the fact that this is your first time using audacity, you will be prompted to identify the location where you have stored the LAME library file.

Select file> Export as MP3 from the menu bar and select where you want to save the file in audacity.

Step 2: Then, choose where you want to store your file & rename it any way you like; now, leave Save as type: MP3 files as the only option available.

Step 3: After clicking on Save, you will be presented with a dialogue asking for your permission; choose Yes to start with the process of saving Audacity files as MP3.

Step 4: You must open the MP3 file in audacity and modify it by adding some particular information such as the artist (optional) and selecting OK to confirm saving as MP3 in Audacity. After that, the project will be exported, transformed, and the audacity files will be saved as MP3 files.

That’s all there is to it! You should now be able to export aup3 to mp3 format. But because of patent and licensing difficulties, LAME codes aren’t usually included with audacity when exporting files to Audacity mp3. LAME codes are alson’t always included when exporting files to MP3. For the sake of conclusion, after we have done editing a project in audacity, we will need to convert it to MP3 format for future convenience. However, you may download it individually for free by following the above methods. Furthermore, Wondershare UniConverter is a fantastic solution with comprehensive capabilities that can assist you in finishing your audacity audio recording projects and saving them as Audacity mp3 files in audacity, among other things.

Conclusions

It’s only natural to want to use audacity to mp3 converter audacity audio recording files since it is one of the greatest tools for editing audacity audio recording files. We also talk about the voice effects of Filmora and how the users can use filmora to change and modify the voice. Video/audio & recorded voiceover may be re-voiced using Filmora. The Pitch option is available for both video/audio files & voiceovers on the Timeline. Change the voice of a video or a recorded voiceover by using it. Here we discuss the Most important Guide to Change the Voices in Videos using Filmora. Add a voiceover or a video to your viral of. The Changing Pitch Option lets you alter your voice. Adjusting Video Speed Lets You Change Your Voice (Optional). Export the video/audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

It’s as simple as downloading Wondershare UniConverter and following on-screen directions to finish the installation and then launching it.

2.Load Audacity file into Uniconverter

Navigate to the Converter section at the top of the screen and click the Add files button to browse your target Audacity files on your computer. Finally, click the Open button to ensure that the Audacity files have been successfully added to the application.

3.Choose output as MP3

Now, choose Output Format from the drop-down menu to see all possible formats. Select the audacity audio recording tab & Audacity mp3 as the output format from the drop-down menu. You may now convert aup3 to mp3 or Audacity mp3 format.

4.Convert Audacity Files to MP3 in just one click

Press the Start All button to begin converting aup3 to mp3. Once the conversion is complete, you may go to the Finished page to access the MP3 files that have been converted.

Using the LAME Library to Convert Audacity Files to MP3 format

What is the best course of action? Aside from those mentioned above simple Wondershare technique, we recommend converting aup3 to mp3 using the LAME library, which can be found in the LAME library. In case you don’t know, audacity seems to be a free multiplatform computer tool that can be used to record and edit audio and convert files to MP3 format. If it is compatible with the LAME library, which is an MP3 encoder, it will enable you to export Audacity files as MP3. The conversion method generally consists of downloading the LAME library & converting the Audacity file to MP3 2 characteristics using the LAME library.

Note:

• Audacity does not have the ability to immediately encode or save Audacity files; you must first download and install the LAME library.

1.Download LAME Library

• To download the appropriate version of LAME, go to the LAME library website & choose your computer system from the drop-down menu, then click Open.

• Now choose the location where you want the file stored & click on Save to begin the download. You may also rename the file, but keep in mind that this sort of file is a compressed folder, so it’s best to preserve it in its original format.

• When the downloading process is complete, just unzip the files as you would normally.

Tips: Alternatively, if you’re using Windows Vista, we suggest that you open the file in the explorer window, select it, and then click on Extract All Files from the command bar to see the contents of the extracted folder.

2.Converting Audacity files to MP3 format

Step 1: Due to the fact that this is your first time using audacity, you will be prompted to identify the location where you have stored the LAME library file.

Select file> Export as MP3 from the menu bar and select where you want to save the file in audacity.

Step 2: Then, choose where you want to store your file & rename it any way you like; now, leave Save as type: MP3 files as the only option available.

Step 3: After clicking on Save, you will be presented with a dialogue asking for your permission; choose Yes to start with the process of saving Audacity files as MP3.

Step 4: You must open the MP3 file in audacity and modify it by adding some particular information such as the artist (optional) and selecting OK to confirm saving as MP3 in Audacity. After that, the project will be exported, transformed, and the audacity files will be saved as MP3 files.

That’s all there is to it! You should now be able to export aup3 to mp3 format. But because of patent and licensing difficulties, LAME codes aren’t usually included with audacity when exporting files to Audacity mp3. LAME codes are alson’t always included when exporting files to MP3. For the sake of conclusion, after we have done editing a project in audacity, we will need to convert it to MP3 format for future convenience. However, you may download it individually for free by following the above methods. Furthermore, Wondershare UniConverter is a fantastic solution with comprehensive capabilities that can assist you in finishing your audacity audio recording projects and saving them as Audacity mp3 files in audacity, among other things.

Conclusions

It’s only natural to want to use audacity to mp3 converter audacity audio recording files since it is one of the greatest tools for editing audacity audio recording files. We also talk about the voice effects of Filmora and how the users can use filmora to change and modify the voice. Video/audio & recorded voiceover may be re-voiced using Filmora. The Pitch option is available for both video/audio files & voiceovers on the Timeline. Change the voice of a video or a recorded voiceover by using it. Here we discuss the Most important Guide to Change the Voices in Videos using Filmora. Add a voiceover or a video to your viral of. The Changing Pitch Option lets you alter your voice. Adjusting Video Speed Lets You Change Your Voice (Optional). Export the video/audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: