The Ultimate Compilation of the Five-Best Free Audio Intensity Harmonizers

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

“MP3 Partitioning Made Simple: Fast and Effective Audio File Division Tips”

You often come across audio files that we like and enjoy. An uncertain situation usually occurs when you love a small part of the audio, but the complete audio is not per your level. If you encounter any such situation, what will you do? Spend hours to find another audio? Or suffice with what you have got?

What if we give you a third option. How about splitting the audio into smaller parts? Well, this sounds a lot better than the other options. The only thing you need is a good Audio Splitter for doing this. You don’t even have to worry about this because we are about to guide you on how to split audio files. We will share an MP3 splitter online and the steps for both Windows and Mac.

In this article

01 How to Split Audio Files on Windows and Mac?

02 How to Split Audio/MP3 File Online?

Part 1. How to Split Audio Files on Windows and Mac?

Whenever you think about audio editing, Wondershare Filmora is associated with that as the best software. The audio editor is perfect and compatible with both Windows and Mac. Wondershare Filmora never ceases to impress its users with its stunning features.

The audio editor Filmora offers a wide range of features. You can add your favorite background music to your videos and change your ordinary video. Moreover, features like trimming, cutting, adjusting audio are also available.

Wondershare Filmora also offers professional editing features such as its Audio Equalizer EQ, Audio Mixer, and also Audio Denoise feature. An exciting thing about Filmora audio editor is its Detach Audio feature. With this, you can Detach Audio from a video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Another handy feature that you get from Filmora is Audio Splitter. With this, users can split audio files and extract the part that they like while deleting the other part. If you want to learn about splitting audio files on Windows and Mac with Filmora, then follow the steps below.

Step 1: Creating Project

To split audio files, you firstly need to open Wondershare Filmora on your respective device. Then, you need to create a new project so that you can get started. The next step demands you to import the audio file to Filmora.

Step 2: Importing Audio File

This could be done by moving to the ‘File’ tab from the top panel. A menu will appear on the screen from which you should select ‘Import Files.’ Then a popup menu will show up, simply hit the ‘Import Media Files’ option.

Step 3: Drag onto Timeline

You can locate the file from your respective device and import it to Filmora. Once the file has been imported successfully, you now have to drag and drop it onto the timeline to start splitting it.

Step 4: Split Audio

Now comes the fun part. Once the audio file is on the timeline, you will see a play head. You need to drag the play head to the point where you want to split the audio. You will see a scissor option after dragging the play head; hit that to split audio into two parts.

Step 5: Edit the Separated Audio

You can delete the audio that you don’t want by selecting it and pressing the ‘Delete’ button on the keyboard. In comparison, you can edit the other part of the audio. For this, double click on the audio in the timeline to open Audio Editing Window.

Step 6: Exporting File

Once you have edited the file and are satisfied, it is ready to be exported. For this, hit the ‘Export’ button, select the output format and save it on your device.

Split Audio after Detaching from Video

As we have mentioned, sometimes you like a sound, but it is part of a video. Do you know a way to get that audio from a video? Well, yes, with Filmora, you can get your favorite audio even from videos and then split it.

This could be done by using its ‘Detach Audio from Video’ feature. What this feature does is that it separates the audio from video and displays both the files separately on the timeline. You can delete the video file by selecting it and pressing ‘Delete.’ Whereas, by following the above-mentioned steps, you can then split the audio easily with the Filmora MP3 splitter.

Final Words

To learn about splitting audio, nothing is better than this article. We have discussed in detail about MP3 splitter online. Also, we talked about Wondershare Filmora audio splitter, the best option for all Windows and Mac users.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 How to Split Audio/MP3 File Online?

Part 1. How to Split Audio Files on Windows and Mac?

Whenever you think about audio editing, Wondershare Filmora is associated with that as the best software. The audio editor is perfect and compatible with both Windows and Mac. Wondershare Filmora never ceases to impress its users with its stunning features.

The audio editor Filmora offers a wide range of features. You can add your favorite background music to your videos and change your ordinary video. Moreover, features like trimming, cutting, adjusting audio are also available.

Wondershare Filmora also offers professional editing features such as its Audio Equalizer EQ, Audio Mixer, and also Audio Denoise feature. An exciting thing about Filmora audio editor is its Detach Audio feature. With this, you can Detach Audio from a video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Another handy feature that you get from Filmora is Audio Splitter. With this, users can split audio files and extract the part that they like while deleting the other part. If you want to learn about splitting audio files on Windows and Mac with Filmora, then follow the steps below.

Step 1: Creating Project

To split audio files, you firstly need to open Wondershare Filmora on your respective device. Then, you need to create a new project so that you can get started. The next step demands you to import the audio file to Filmora.

Step 2: Importing Audio File

This could be done by moving to the ‘File’ tab from the top panel. A menu will appear on the screen from which you should select ‘Import Files.’ Then a popup menu will show up, simply hit the ‘Import Media Files’ option.

Step 3: Drag onto Timeline

You can locate the file from your respective device and import it to Filmora. Once the file has been imported successfully, you now have to drag and drop it onto the timeline to start splitting it.

Step 4: Split Audio

Now comes the fun part. Once the audio file is on the timeline, you will see a play head. You need to drag the play head to the point where you want to split the audio. You will see a scissor option after dragging the play head; hit that to split audio into two parts.

Step 5: Edit the Separated Audio

You can delete the audio that you don’t want by selecting it and pressing the ‘Delete’ button on the keyboard. In comparison, you can edit the other part of the audio. For this, double click on the audio in the timeline to open Audio Editing Window.

Step 6: Exporting File

Once you have edited the file and are satisfied, it is ready to be exported. For this, hit the ‘Export’ button, select the output format and save it on your device.

Split Audio after Detaching from Video

As we have mentioned, sometimes you like a sound, but it is part of a video. Do you know a way to get that audio from a video? Well, yes, with Filmora, you can get your favorite audio even from videos and then split it.

This could be done by using its ‘Detach Audio from Video’ feature. What this feature does is that it separates the audio from video and displays both the files separately on the timeline. You can delete the video file by selecting it and pressing ‘Delete.’ Whereas, by following the above-mentioned steps, you can then split the audio easily with the Filmora MP3 splitter.

Final Words

To learn about splitting audio, nothing is better than this article. We have discussed in detail about MP3 splitter online. Also, we talked about Wondershare Filmora audio splitter, the best option for all Windows and Mac users.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 How to Split Audio/MP3 File Online?

Part 1. How to Split Audio Files on Windows and Mac?

Whenever you think about audio editing, Wondershare Filmora is associated with that as the best software. The audio editor is perfect and compatible with both Windows and Mac. Wondershare Filmora never ceases to impress its users with its stunning features.

The audio editor Filmora offers a wide range of features. You can add your favorite background music to your videos and change your ordinary video. Moreover, features like trimming, cutting, adjusting audio are also available.

Wondershare Filmora also offers professional editing features such as its Audio Equalizer EQ, Audio Mixer, and also Audio Denoise feature. An exciting thing about Filmora audio editor is its Detach Audio feature. With this, you can Detach Audio from a video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Another handy feature that you get from Filmora is Audio Splitter. With this, users can split audio files and extract the part that they like while deleting the other part. If you want to learn about splitting audio files on Windows and Mac with Filmora, then follow the steps below.

Step 1: Creating Project

To split audio files, you firstly need to open Wondershare Filmora on your respective device. Then, you need to create a new project so that you can get started. The next step demands you to import the audio file to Filmora.

Step 2: Importing Audio File

This could be done by moving to the ‘File’ tab from the top panel. A menu will appear on the screen from which you should select ‘Import Files.’ Then a popup menu will show up, simply hit the ‘Import Media Files’ option.

Step 3: Drag onto Timeline

You can locate the file from your respective device and import it to Filmora. Once the file has been imported successfully, you now have to drag and drop it onto the timeline to start splitting it.

Step 4: Split Audio

Now comes the fun part. Once the audio file is on the timeline, you will see a play head. You need to drag the play head to the point where you want to split the audio. You will see a scissor option after dragging the play head; hit that to split audio into two parts.

Step 5: Edit the Separated Audio

You can delete the audio that you don’t want by selecting it and pressing the ‘Delete’ button on the keyboard. In comparison, you can edit the other part of the audio. For this, double click on the audio in the timeline to open Audio Editing Window.

Step 6: Exporting File

Once you have edited the file and are satisfied, it is ready to be exported. For this, hit the ‘Export’ button, select the output format and save it on your device.

Split Audio after Detaching from Video

As we have mentioned, sometimes you like a sound, but it is part of a video. Do you know a way to get that audio from a video? Well, yes, with Filmora, you can get your favorite audio even from videos and then split it.

This could be done by using its ‘Detach Audio from Video’ feature. What this feature does is that it separates the audio from video and displays both the files separately on the timeline. You can delete the video file by selecting it and pressing ‘Delete.’ Whereas, by following the above-mentioned steps, you can then split the audio easily with the Filmora MP3 splitter.

Final Words

To learn about splitting audio, nothing is better than this article. We have discussed in detail about MP3 splitter online. Also, we talked about Wondershare Filmora audio splitter, the best option for all Windows and Mac users.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 How to Split Audio/MP3 File Online?

Part 1. How to Split Audio Files on Windows and Mac?

Whenever you think about audio editing, Wondershare Filmora is associated with that as the best software. The audio editor is perfect and compatible with both Windows and Mac. Wondershare Filmora never ceases to impress its users with its stunning features.

The audio editor Filmora offers a wide range of features. You can add your favorite background music to your videos and change your ordinary video. Moreover, features like trimming, cutting, adjusting audio are also available.

Wondershare Filmora also offers professional editing features such as its Audio Equalizer EQ, Audio Mixer, and also Audio Denoise feature. An exciting thing about Filmora audio editor is its Detach Audio feature. With this, you can Detach Audio from a video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Another handy feature that you get from Filmora is Audio Splitter. With this, users can split audio files and extract the part that they like while deleting the other part. If you want to learn about splitting audio files on Windows and Mac with Filmora, then follow the steps below.

Step 1: Creating Project

To split audio files, you firstly need to open Wondershare Filmora on your respective device. Then, you need to create a new project so that you can get started. The next step demands you to import the audio file to Filmora.

Step 2: Importing Audio File

This could be done by moving to the ‘File’ tab from the top panel. A menu will appear on the screen from which you should select ‘Import Files.’ Then a popup menu will show up, simply hit the ‘Import Media Files’ option.

Step 3: Drag onto Timeline

You can locate the file from your respective device and import it to Filmora. Once the file has been imported successfully, you now have to drag and drop it onto the timeline to start splitting it.

Step 4: Split Audio

Now comes the fun part. Once the audio file is on the timeline, you will see a play head. You need to drag the play head to the point where you want to split the audio. You will see a scissor option after dragging the play head; hit that to split audio into two parts.

Step 5: Edit the Separated Audio

You can delete the audio that you don’t want by selecting it and pressing the ‘Delete’ button on the keyboard. In comparison, you can edit the other part of the audio. For this, double click on the audio in the timeline to open Audio Editing Window.

Step 6: Exporting File

Once you have edited the file and are satisfied, it is ready to be exported. For this, hit the ‘Export’ button, select the output format and save it on your device.

Split Audio after Detaching from Video

As we have mentioned, sometimes you like a sound, but it is part of a video. Do you know a way to get that audio from a video? Well, yes, with Filmora, you can get your favorite audio even from videos and then split it.

This could be done by using its ‘Detach Audio from Video’ feature. What this feature does is that it separates the audio from video and displays both the files separately on the timeline. You can delete the video file by selecting it and pressing ‘Delete.’ Whereas, by following the above-mentioned steps, you can then split the audio easily with the Filmora MP3 splitter.

Final Words

To learn about splitting audio, nothing is better than this article. We have discussed in detail about MP3 splitter online. Also, we talked about Wondershare Filmora audio splitter, the best option for all Windows and Mac users.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Discovering Where to Hear Frustrated Dogs Bark

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Today, we will show you to add angry dog sound effects to your videos. For instance, you have a video where you go completely silent, and you don’t want your audience to realize that you went dry of words. At the same time, you cannot cut out the video clip section because maybe it was a DIY tutorial, and every action counts. Well, worry no more because today we will show you step by step addition of dog bark audio and the various ways of downloading dog barking mp3.

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Sound Effects in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Sound design is one of the most underappreciated components of filmmaking by filmmakers. However, this should not prevent you from designing intriguing soundscapes for your project. As a result, we’ve compiled a list of the top ways to get free sound effects.

1. Download from Some YouTube Video

YouTube has a lot of significant sound effects which are with reach. At the same time, it is very tricky to download from the platform. However, the YTD video downloader has made the process easier, which is also free to use. Below is a guide on how you can do it –

Step 1 Download and install the YTD Video downloader

Now using your browser, navigate to the YouTube video with the sound effect you wish to save.

Step 2 If it isn’t already running, start YTD Video Downloader

Then, copy and paste the YouTube URL from your browser into the URL area on YTD.

Step 3 In YTD, click the Download option

When the video download is finished, go to the Convert tab in YTD Video Downloader.

Step 4 Choose the video file to be converted to MP3

From the “Convert video to” option, choose MPEG Audio Layer 3 (MP3).

Step 5 Finally click on the Convert Video button

2. Make Angry Dog Effect by Yourself

This is one quick way to make a sound effect, even though it will not give you the best quality sound. All you need is a smartphone and your dog. Here is the way to go about it –

Step 1 Take your dog to a room where no other sounds are made

Step 2 Then, chain the dog at one corner to minimize its movement

Step 3 Position your phone somewhere; it will pick the dog bark

Then hit record on the phone and move to a corner holding something that the dog will want or likes.

Step 4 Say something (anything you want), and eventually, your dog will bark in anticipation

The dog bark audio will be saved in mp3 format, and you can edit and cut it as you wish.

Step 5 Save the dog barking mp3 ready to be added to your video

3. Mix kit Glitch Sound Effects Package

As you strive to achieve a rough and edgy dog bark voice for your project. Glitch sound effects can help you achieve precisely that. This free sound effect set will help your videos compete with the world’s best filmmakers.

Step 1 Search mix kit glitch sound effects on Google

Step 2 Click DOWNLOAD FREE GLITCH SOUND EFFECTS from the search results

Step 3 Scroll to the bottom of the page and select animals sound effects

Step 4 Find dog barking sound effects by scrolling or searching and downloading

4. Story Blocks Sound Effects

This royalty-free sound bundle may add depth and tone to your setting with the evocative sounds of animal noises. The website includes a wide range of dog barks, from modest suburban dog barks to nightguard German shepherds angry dog barks to deter burglars. Here’s a step-by-step guide to getting exactly what you’re searching for.

Step 1 Go to the story blocks website

Step 2 Use keyword dog barks to search

Step 3 Browse the dog bark voice that suits your needs by playing a preview

Step 4 Download and save, ready to be added to your video

5. Zapsplat Free Sound Effects

Step 1 Visit the website zapsplat.com. This is the perfect spot if you want to get free sound effects. All of their sounds are available for download as mp3. Here’s how:

There, you’ll discover all sounds organized into functional categories, allowing you to search fast and conveniently. Step 2 Click free sound effects and then categories

Step 3 Select the dog category

Step 4 Download your preferred dog bark sound effect, and you are good to go

6. Use Tunepocket.com

Tunepocket is the website that provides a limitless count of sound effects to get downloaded. You can easily find the angry dog bark voice effect with many options from the website.

Step by Step Process to Get Sound Effects:

Step 1 Visit the website tunepocket.com from your home browser. Jump on the sound effects tab

Step 2 Go to search bar and type angry dog bark voice effect

A number of results will appear. Select the one which fits by playing random sounds.

Step 3 Download, edit, and it is ready to use

Part 2 Use Filmora to Add Sound Effects in Your Video

Wondershare Filmora is an amazing video-making and editing software. Filmora offers video editing for consumers ranging from beginner to intermediate users. Its standard functions include video editing, audio cut, and adding audio to video tools, which are explored and managed by a drag-and-drop interface. Filmmakers, game developers, podcasters, TV, radio, performing arts, and schools use their technologies extensively. Filmora is available in four different versions:

• Filmora entry-level desktop video editor.
• Filmora mobile version, which is Android and iOS compatible.
• FilmoraScrn is a screen recording app for Windows with built-in video editing capabilities.

Each version is tailored to the needs of the individual users.

Features

• Audio Equalizer: Enables you to lower or raise the loudness of an audio frequency.
• Audio Controls: Control audio levels of the music track to adjust with the clip.
• Audio Separation: Split the audio from the video to make them separate.
• Noise Removal: Remove background noise from the audio.
• Audio Mixer: Readjusting the volume, speed, and pitch of dBm. Also, panning of each track.

Step by Step Guide for Adding Sound Effects to Video with Filmora:

Filmora can assist you in adding sound effects to your video. And since we already showed you different ways of downloading sound effects audio, now we will show you a step-by-step guide on how to add them to your video using Filmora –

Step 1 Import Already Downloaded Dog Barking mp3 File

Launch and bring the audio file to the Filmora app by clicking MEDIA and the IMPORT button below the menu bar. Download the app from the official site if you have not). From the drop-down menu, select ‘Import Media Files’ to select the video clip, and then repeat the process to choose the dog bark audio file.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step 2 Edit the Audio File

You can modify the music by double-tapping the audio on the timeline. It will display the audio panel at the top of the screen. You may arrange the audio to fade in or out, adjust the pitch, speed, and volume, and select the suitable equalization.

Step 3 Merge the Audio File with Video

Drag and drop the audio over the video you are editing on the timeline to merge them.

Step 4 Exporting the Edited Video

After you’ve made the necessary adjustments to your movie and added the dog bark audio, click the ‘EXPORT’ option on the toolbar to export it. The produced file may be saved in.MP4 and.WMV formats, also rename and set your desired resolution.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

I hope, you have found a lot of options to find the angry dog bark audio effect. We explained all the sources and methods step by step, you don’t need to jump to any other website. Use any of the above options to find and download the angry dog bark effect for free. Choose the source and track it according to your requirement. The audio track of a video clip or movie may be edited with the Filmora video editor. Disable audio for a video, enhance audio quality, switch audio codecs, and whatever function you pick produces excellent results.

Its versatility with practically all devices, whether smartphone or computer, makes it even more appealing and one of the most powerful tools for video editing. And, unlike many video editors, Filmora includes a free entry-level Windows program that does everything you need.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free Try It Free

Today, we will show you to add angry dog sound effects to your videos. For instance, you have a video where you go completely silent, and you don’t want your audience to realize that you went dry of words. At the same time, you cannot cut out the video clip section because maybe it was a DIY tutorial, and every action counts. Well, worry no more because today we will show you step by step addition of dog bark audio and the various ways of downloading dog barking mp3.

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Sound Effects in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Sound design is one of the most underappreciated components of filmmaking by filmmakers. However, this should not prevent you from designing intriguing soundscapes for your project. As a result, we’ve compiled a list of the top ways to get free sound effects.

1. Download from Some YouTube Video

YouTube has a lot of significant sound effects which are with reach. At the same time, it is very tricky to download from the platform. However, the YTD video downloader has made the process easier, which is also free to use. Below is a guide on how you can do it –

Step 1 Download and install the YTD Video downloader

Now using your browser, navigate to the YouTube video with the sound effect you wish to save.

Step 2 If it isn’t already running, start YTD Video Downloader

Then, copy and paste the YouTube URL from your browser into the URL area on YTD.

Step 3 In YTD, click the Download option

When the video download is finished, go to the Convert tab in YTD Video Downloader.

Step 4 Choose the video file to be converted to MP3

From the “Convert video to” option, choose MPEG Audio Layer 3 (MP3).

Step 5 Finally click on the Convert Video button

2. Make Angry Dog Effect by Yourself

This is one quick way to make a sound effect, even though it will not give you the best quality sound. All you need is a smartphone and your dog. Here is the way to go about it –

Step 1 Take your dog to a room where no other sounds are made

Step 2 Then, chain the dog at one corner to minimize its movement

Step 3 Position your phone somewhere; it will pick the dog bark

Then hit record on the phone and move to a corner holding something that the dog will want or likes.

Step 4 Say something (anything you want), and eventually, your dog will bark in anticipation

The dog bark audio will be saved in mp3 format, and you can edit and cut it as you wish.

Step 5 Save the dog barking mp3 ready to be added to your video

3. Mix kit Glitch Sound Effects Package

As you strive to achieve a rough and edgy dog bark voice for your project. Glitch sound effects can help you achieve precisely that. This free sound effect set will help your videos compete with the world’s best filmmakers.

Step 1 Search mix kit glitch sound effects on Google

Step 2 Click DOWNLOAD FREE GLITCH SOUND EFFECTS from the search results

Step 3 Scroll to the bottom of the page and select animals sound effects

Step 4 Find dog barking sound effects by scrolling or searching and downloading

4. Story Blocks Sound Effects

This royalty-free sound bundle may add depth and tone to your setting with the evocative sounds of animal noises. The website includes a wide range of dog barks, from modest suburban dog barks to nightguard German shepherds angry dog barks to deter burglars. Here’s a step-by-step guide to getting exactly what you’re searching for.

Step 1 Go to the story blocks website

Step 2 Use keyword dog barks to search

Step 3 Browse the dog bark voice that suits your needs by playing a preview

Step 4 Download and save, ready to be added to your video

5. Zapsplat Free Sound Effects

Step 1 Visit the website zapsplat.com. This is the perfect spot if you want to get free sound effects. All of their sounds are available for download as mp3. Here’s how:

There, you’ll discover all sounds organized into functional categories, allowing you to search fast and conveniently. Step 2 Click free sound effects and then categories

Step 3 Select the dog category

Step 4 Download your preferred dog bark sound effect, and you are good to go

6. Use Tunepocket.com

Tunepocket is the website that provides a limitless count of sound effects to get downloaded. You can easily find the angry dog bark voice effect with many options from the website.

Step by Step Process to Get Sound Effects:

Step 1 Visit the website tunepocket.com from your home browser. Jump on the sound effects tab

Step 2 Go to search bar and type angry dog bark voice effect

A number of results will appear. Select the one which fits by playing random sounds.

Step 3 Download, edit, and it is ready to use

Part 2 Use Filmora to Add Sound Effects in Your Video

Wondershare Filmora is an amazing video-making and editing software. Filmora offers video editing for consumers ranging from beginner to intermediate users. Its standard functions include video editing, audio cut, and adding audio to video tools, which are explored and managed by a drag-and-drop interface. Filmmakers, game developers, podcasters, TV, radio, performing arts, and schools use their technologies extensively. Filmora is available in four different versions:

• Filmora entry-level desktop video editor.
• Filmora mobile version, which is Android and iOS compatible.
• FilmoraScrn is a screen recording app for Windows with built-in video editing capabilities.

Each version is tailored to the needs of the individual users.

Features

• Audio Equalizer: Enables you to lower or raise the loudness of an audio frequency.
• Audio Controls: Control audio levels of the music track to adjust with the clip.
• Audio Separation: Split the audio from the video to make them separate.
• Noise Removal: Remove background noise from the audio.
• Audio Mixer: Readjusting the volume, speed, and pitch of dBm. Also, panning of each track.

Step by Step Guide for Adding Sound Effects to Video with Filmora:

Filmora can assist you in adding sound effects to your video. And since we already showed you different ways of downloading sound effects audio, now we will show you a step-by-step guide on how to add them to your video using Filmora –

Step 1 Import Already Downloaded Dog Barking mp3 File

Launch and bring the audio file to the Filmora app by clicking MEDIA and the IMPORT button below the menu bar. Download the app from the official site if you have not). From the drop-down menu, select ‘Import Media Files’ to select the video clip, and then repeat the process to choose the dog bark audio file.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step 2 Edit the Audio File

You can modify the music by double-tapping the audio on the timeline. It will display the audio panel at the top of the screen. You may arrange the audio to fade in or out, adjust the pitch, speed, and volume, and select the suitable equalization.

Step 3 Merge the Audio File with Video

Drag and drop the audio over the video you are editing on the timeline to merge them.

Step 4 Exporting the Edited Video

After you’ve made the necessary adjustments to your movie and added the dog bark audio, click the ‘EXPORT’ option on the toolbar to export it. The produced file may be saved in.MP4 and.WMV formats, also rename and set your desired resolution.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

I hope, you have found a lot of options to find the angry dog bark audio effect. We explained all the sources and methods step by step, you don’t need to jump to any other website. Use any of the above options to find and download the angry dog bark effect for free. Choose the source and track it according to your requirement. The audio track of a video clip or movie may be edited with the Filmora video editor. Disable audio for a video, enhance audio quality, switch audio codecs, and whatever function you pick produces excellent results.

Its versatility with practically all devices, whether smartphone or computer, makes it even more appealing and one of the most powerful tools for video editing. And, unlike many video editors, Filmora includes a free entry-level Windows program that does everything you need.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free Try It Free

Today, we will show you to add angry dog sound effects to your videos. For instance, you have a video where you go completely silent, and you don’t want your audience to realize that you went dry of words. At the same time, you cannot cut out the video clip section because maybe it was a DIY tutorial, and every action counts. Well, worry no more because today we will show you step by step addition of dog bark audio and the various ways of downloading dog barking mp3.

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Sound Effects in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Sound design is one of the most underappreciated components of filmmaking by filmmakers. However, this should not prevent you from designing intriguing soundscapes for your project. As a result, we’ve compiled a list of the top ways to get free sound effects.

1. Download from Some YouTube Video

YouTube has a lot of significant sound effects which are with reach. At the same time, it is very tricky to download from the platform. However, the YTD video downloader has made the process easier, which is also free to use. Below is a guide on how you can do it –

Step 1 Download and install the YTD Video downloader

Now using your browser, navigate to the YouTube video with the sound effect you wish to save.

Step 2 If it isn’t already running, start YTD Video Downloader

Then, copy and paste the YouTube URL from your browser into the URL area on YTD.

Step 3 In YTD, click the Download option

When the video download is finished, go to the Convert tab in YTD Video Downloader.

Step 4 Choose the video file to be converted to MP3

From the “Convert video to” option, choose MPEG Audio Layer 3 (MP3).

Step 5 Finally click on the Convert Video button

2. Make Angry Dog Effect by Yourself

This is one quick way to make a sound effect, even though it will not give you the best quality sound. All you need is a smartphone and your dog. Here is the way to go about it –

Step 1 Take your dog to a room where no other sounds are made

Step 2 Then, chain the dog at one corner to minimize its movement

Step 3 Position your phone somewhere; it will pick the dog bark

Then hit record on the phone and move to a corner holding something that the dog will want or likes.

Step 4 Say something (anything you want), and eventually, your dog will bark in anticipation

The dog bark audio will be saved in mp3 format, and you can edit and cut it as you wish.

Step 5 Save the dog barking mp3 ready to be added to your video

3. Mix kit Glitch Sound Effects Package

As you strive to achieve a rough and edgy dog bark voice for your project. Glitch sound effects can help you achieve precisely that. This free sound effect set will help your videos compete with the world’s best filmmakers.

Step 1 Search mix kit glitch sound effects on Google

Step 2 Click DOWNLOAD FREE GLITCH SOUND EFFECTS from the search results

Step 3 Scroll to the bottom of the page and select animals sound effects

Step 4 Find dog barking sound effects by scrolling or searching and downloading

4. Story Blocks Sound Effects

This royalty-free sound bundle may add depth and tone to your setting with the evocative sounds of animal noises. The website includes a wide range of dog barks, from modest suburban dog barks to nightguard German shepherds angry dog barks to deter burglars. Here’s a step-by-step guide to getting exactly what you’re searching for.

Step 1 Go to the story blocks website

Step 2 Use keyword dog barks to search

Step 3 Browse the dog bark voice that suits your needs by playing a preview

Step 4 Download and save, ready to be added to your video

5. Zapsplat Free Sound Effects

Step 1 Visit the website zapsplat.com. This is the perfect spot if you want to get free sound effects. All of their sounds are available for download as mp3. Here’s how:

There, you’ll discover all sounds organized into functional categories, allowing you to search fast and conveniently. Step 2 Click free sound effects and then categories

Step 3 Select the dog category

Step 4 Download your preferred dog bark sound effect, and you are good to go

6. Use Tunepocket.com

Tunepocket is the website that provides a limitless count of sound effects to get downloaded. You can easily find the angry dog bark voice effect with many options from the website.

Step by Step Process to Get Sound Effects:

Step 1 Visit the website tunepocket.com from your home browser. Jump on the sound effects tab

Step 2 Go to search bar and type angry dog bark voice effect

A number of results will appear. Select the one which fits by playing random sounds.

Step 3 Download, edit, and it is ready to use

Part 2 Use Filmora to Add Sound Effects in Your Video

Wondershare Filmora is an amazing video-making and editing software. Filmora offers video editing for consumers ranging from beginner to intermediate users. Its standard functions include video editing, audio cut, and adding audio to video tools, which are explored and managed by a drag-and-drop interface. Filmmakers, game developers, podcasters, TV, radio, performing arts, and schools use their technologies extensively. Filmora is available in four different versions:

• Filmora entry-level desktop video editor.
• Filmora mobile version, which is Android and iOS compatible.
• FilmoraScrn is a screen recording app for Windows with built-in video editing capabilities.

Each version is tailored to the needs of the individual users.

Features

• Audio Equalizer: Enables you to lower or raise the loudness of an audio frequency.
• Audio Controls: Control audio levels of the music track to adjust with the clip.
• Audio Separation: Split the audio from the video to make them separate.
• Noise Removal: Remove background noise from the audio.
• Audio Mixer: Readjusting the volume, speed, and pitch of dBm. Also, panning of each track.

Step by Step Guide for Adding Sound Effects to Video with Filmora:

Filmora can assist you in adding sound effects to your video. And since we already showed you different ways of downloading sound effects audio, now we will show you a step-by-step guide on how to add them to your video using Filmora –

Step 1 Import Already Downloaded Dog Barking mp3 File

Launch and bring the audio file to the Filmora app by clicking MEDIA and the IMPORT button below the menu bar. Download the app from the official site if you have not). From the drop-down menu, select ‘Import Media Files’ to select the video clip, and then repeat the process to choose the dog bark audio file.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step 2 Edit the Audio File

You can modify the music by double-tapping the audio on the timeline. It will display the audio panel at the top of the screen. You may arrange the audio to fade in or out, adjust the pitch, speed, and volume, and select the suitable equalization.

Step 3 Merge the Audio File with Video

Drag and drop the audio over the video you are editing on the timeline to merge them.

Step 4 Exporting the Edited Video

After you’ve made the necessary adjustments to your movie and added the dog bark audio, click the ‘EXPORT’ option on the toolbar to export it. The produced file may be saved in.MP4 and.WMV formats, also rename and set your desired resolution.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

I hope, you have found a lot of options to find the angry dog bark audio effect. We explained all the sources and methods step by step, you don’t need to jump to any other website. Use any of the above options to find and download the angry dog bark effect for free. Choose the source and track it according to your requirement. The audio track of a video clip or movie may be edited with the Filmora video editor. Disable audio for a video, enhance audio quality, switch audio codecs, and whatever function you pick produces excellent results.

Its versatility with practically all devices, whether smartphone or computer, makes it even more appealing and one of the most powerful tools for video editing. And, unlike many video editors, Filmora includes a free entry-level Windows program that does everything you need.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free Try It Free

Today, we will show you to add angry dog sound effects to your videos. For instance, you have a video where you go completely silent, and you don’t want your audience to realize that you went dry of words. At the same time, you cannot cut out the video clip section because maybe it was a DIY tutorial, and every action counts. Well, worry no more because today we will show you step by step addition of dog bark audio and the various ways of downloading dog barking mp3.

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Sound Effects in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Sound design is one of the most underappreciated components of filmmaking by filmmakers. However, this should not prevent you from designing intriguing soundscapes for your project. As a result, we’ve compiled a list of the top ways to get free sound effects.

1. Download from Some YouTube Video

YouTube has a lot of significant sound effects which are with reach. At the same time, it is very tricky to download from the platform. However, the YTD video downloader has made the process easier, which is also free to use. Below is a guide on how you can do it –

Step 1 Download and install the YTD Video downloader

Now using your browser, navigate to the YouTube video with the sound effect you wish to save.

Step 2 If it isn’t already running, start YTD Video Downloader

Then, copy and paste the YouTube URL from your browser into the URL area on YTD.

Step 3 In YTD, click the Download option

When the video download is finished, go to the Convert tab in YTD Video Downloader.

Step 4 Choose the video file to be converted to MP3

From the “Convert video to” option, choose MPEG Audio Layer 3 (MP3).

Step 5 Finally click on the Convert Video button

2. Make Angry Dog Effect by Yourself

This is one quick way to make a sound effect, even though it will not give you the best quality sound. All you need is a smartphone and your dog. Here is the way to go about it –

Step 1 Take your dog to a room where no other sounds are made

Step 2 Then, chain the dog at one corner to minimize its movement

Step 3 Position your phone somewhere; it will pick the dog bark

Then hit record on the phone and move to a corner holding something that the dog will want or likes.

Step 4 Say something (anything you want), and eventually, your dog will bark in anticipation

The dog bark audio will be saved in mp3 format, and you can edit and cut it as you wish.

Step 5 Save the dog barking mp3 ready to be added to your video

3. Mix kit Glitch Sound Effects Package

As you strive to achieve a rough and edgy dog bark voice for your project. Glitch sound effects can help you achieve precisely that. This free sound effect set will help your videos compete with the world’s best filmmakers.

Step 1 Search mix kit glitch sound effects on Google

Step 2 Click DOWNLOAD FREE GLITCH SOUND EFFECTS from the search results

Step 3 Scroll to the bottom of the page and select animals sound effects

Step 4 Find dog barking sound effects by scrolling or searching and downloading

4. Story Blocks Sound Effects

This royalty-free sound bundle may add depth and tone to your setting with the evocative sounds of animal noises. The website includes a wide range of dog barks, from modest suburban dog barks to nightguard German shepherds angry dog barks to deter burglars. Here’s a step-by-step guide to getting exactly what you’re searching for.

Step 1 Go to the story blocks website

Step 2 Use keyword dog barks to search

Step 3 Browse the dog bark voice that suits your needs by playing a preview

Step 4 Download and save, ready to be added to your video

5. Zapsplat Free Sound Effects

Step 1 Visit the website zapsplat.com. This is the perfect spot if you want to get free sound effects. All of their sounds are available for download as mp3. Here’s how:

There, you’ll discover all sounds organized into functional categories, allowing you to search fast and conveniently. Step 2 Click free sound effects and then categories

Step 3 Select the dog category

Step 4 Download your preferred dog bark sound effect, and you are good to go

6. Use Tunepocket.com

Tunepocket is the website that provides a limitless count of sound effects to get downloaded. You can easily find the angry dog bark voice effect with many options from the website.

Step by Step Process to Get Sound Effects:

Step 1 Visit the website tunepocket.com from your home browser. Jump on the sound effects tab

Step 2 Go to search bar and type angry dog bark voice effect

A number of results will appear. Select the one which fits by playing random sounds.

Step 3 Download, edit, and it is ready to use

Part 2 Use Filmora to Add Sound Effects in Your Video

Wondershare Filmora is an amazing video-making and editing software. Filmora offers video editing for consumers ranging from beginner to intermediate users. Its standard functions include video editing, audio cut, and adding audio to video tools, which are explored and managed by a drag-and-drop interface. Filmmakers, game developers, podcasters, TV, radio, performing arts, and schools use their technologies extensively. Filmora is available in four different versions:

• Filmora entry-level desktop video editor.
• Filmora mobile version, which is Android and iOS compatible.
• FilmoraScrn is a screen recording app for Windows with built-in video editing capabilities.

Each version is tailored to the needs of the individual users.

Features

• Audio Equalizer: Enables you to lower or raise the loudness of an audio frequency.
• Audio Controls: Control audio levels of the music track to adjust with the clip.
• Audio Separation: Split the audio from the video to make them separate.
• Noise Removal: Remove background noise from the audio.
• Audio Mixer: Readjusting the volume, speed, and pitch of dBm. Also, panning of each track.

Step by Step Guide for Adding Sound Effects to Video with Filmora:

Filmora can assist you in adding sound effects to your video. And since we already showed you different ways of downloading sound effects audio, now we will show you a step-by-step guide on how to add them to your video using Filmora –

Step 1 Import Already Downloaded Dog Barking mp3 File

Launch and bring the audio file to the Filmora app by clicking MEDIA and the IMPORT button below the menu bar. Download the app from the official site if you have not). From the drop-down menu, select ‘Import Media Files’ to select the video clip, and then repeat the process to choose the dog bark audio file.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step 2 Edit the Audio File

You can modify the music by double-tapping the audio on the timeline. It will display the audio panel at the top of the screen. You may arrange the audio to fade in or out, adjust the pitch, speed, and volume, and select the suitable equalization.

Step 3 Merge the Audio File with Video

Drag and drop the audio over the video you are editing on the timeline to merge them.

Step 4 Exporting the Edited Video

After you’ve made the necessary adjustments to your movie and added the dog bark audio, click the ‘EXPORT’ option on the toolbar to export it. The produced file may be saved in.MP4 and.WMV formats, also rename and set your desired resolution.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

I hope, you have found a lot of options to find the angry dog bark audio effect. We explained all the sources and methods step by step, you don’t need to jump to any other website. Use any of the above options to find and download the angry dog bark effect for free. Choose the source and track it according to your requirement. The audio track of a video clip or movie may be edited with the Filmora video editor. Disable audio for a video, enhance audio quality, switch audio codecs, and whatever function you pick produces excellent results.

Its versatility with practically all devices, whether smartphone or computer, makes it even more appealing and one of the most powerful tools for video editing. And, unlike many video editors, Filmora includes a free entry-level Windows program that does everything you need.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: