Essential Top Ten: Gratis Global Audio Equalization Tools

What is Audio Normalization, what are its different types, why do we need it and how to do it online? – these are the questions we might ask when first learning about it. Well, then, let’s answer all of them!

Audio Normalization means that the loudest parts of an audio signal are set to a specific value. For example, -18 dBFS (decibels relative to full scale). This is done so that all the parts of the sound mix remain at equal volume levels.

You can use this tool when mixing or editing your music, or during playback on your speakers. In the case of mixing, listen for any clipping (A form of waveform distortion - It sounds like the audio is starting to ‘break up,’ which is light distortion. The more severe it is, the more distorted the music begins to sound) that could occur in your mix. So, in this case, you need to normalize before it becomes too loud and needs more and more fixing. So, normalizing the audio kind of means balancing the volume of the track.

Mostly, audio normalizers are used for balancing out the volume of music, podcast, or other audio recordings. Whenever you have a variety of audio clips that would sound too loud or soft if listened to together, an audio normalizer helps you create a more cohesive listening experience. So, why, and when, do we need to normalize our tracks?

• To make different music styles sound more cohesive;
• To adjust the volume of podcast to be at a consistent level with one another
• To remove sharp spikes in volume for consistent listening experience for our audiences

So, what are the types of audio normalization? Here you have it:

• peak normalization - helps adjust the recording based on the highest signal level present in the recording;
• loudness normalization - adjusts the recording based on perceived loudness;
• RMS (Root-Mean-Square) - changes the value of all the samples, where their average electrical volume overall is a specified level.

So, say that if you are a creator and have listeners, with this tool, you can count on the expectation that people will more likely want to convert to being loyal subscribers, viewers and listeners. This is what happens when audiences feel their user experience is favored and they enjoy a good content – it makes them come back for more.

But sometimes you don’t have so much time that would allow you to find a software, download its installer, install it, learn how to navigate inside its interface, which might be totally new and in some cases, complicated for you, and learn how to normalize your audio files there. In this case, you might want to find the right tools which would enable you to reach your goal without even having to install anything – simple and fast!

Hence, for this case, we would like to offer you the list of 10 best free online audio normalizers. The list goes:

1. MP3 Gain Volume Changer
2. Sodaphonic
3. Audio Mass
4. Audio Online Convert
5. Audio Editor
6. fConvert Online Converter
7. Boost MP3 Volume
8. MP3Cut Change Volume
9. Audio Alter Volume Changer
10. Audio Trimmer Volume Booster

Therefore, let’s delve into each one of them, and learn how to use those online editors in our favor!

MP3 Gain Volume Changer

This online editor allows you to adjust the volume level of MP3 audio files fast – it can raise, lower, and normalize the volume level of your MP3 files.

The interface is simple and easy to use – exactly what you must be looking for. You can adjust the volume level to make the MP3 the way you want to listen to it.

One of the important things this app is letting you do is to upload from Google Drive or Desktop – it works locally without going through a server, and this means that MP3s do not need to be uploaded to any server.

So, go to this link . Click on Choose Files and find the audio clip you would like to normalize.

Now, once your audio track is added, head a little below and find the options you have.

Here, you can decide what do really do with your file: do you want to increase or decrease the volume? If you choose automatic normalization, the app will figure something out itself! And, look at the right side – in case you know well your decibels, you can choose how many decibels to apply. But the web-site itself says that 3.0 decibels is recommended, so it would be nice to just stick with it.

If you have multiple files and you want to normalize them all at once, click on Create MP3 (All); in case you have a lot of files and you would like to normalize one or more of them but not all, then your best choice would be Create MP3 (Selected). Another option is that you save your file on Google Drive.

When you Create your file(s), the normalized one(s) will appear under those buttons in Progress Log, and you can Play right away, or Download and listen to it later on.

Sodaphonic

Sodaphonic also lets you edit your audio files online. With the help of this editor, you can cut, copy, and paste sound segments of an audio. It offers you: normalizing audio, using audio effects, time-stretching, reversing audio, fade-in and fade-out – those tools are really helpful.

Sodaphonic is pretty interesting as the first thing that meets the eye is that it lets you not only pick or drop an audio file there, but record something new, too!

Any option you choose, then when proceeding into the editor, you will see your file waveform there. In order to normalize the audio, on the top left, find Edit, put a cursor on it, and you will see the menu appear. Find Normalize and click on it.

A little window will appear, where you need to fill in how many decibels should be set as the max peak.

Once you do this and click on Normalize, your file will now be affected, and you can also compare the waveform – it is now a little different, isn’t it?

So, when you are happy with the result, just go to File, and Choose Export.

Audio Mass

The Audio Mass editor will help you edit audio and waveforms over the web. There, you can load any audio format your browser supports, and apply many different audio effects (fading in, cutting, trimming…)

So, Audio Mass lets you: normalize audio, analyze frequency, signal distortion and peaking, trim, past, cut audio segments, reversing and inverting audio, convert to MP3, change of volume levels, fade in and fade out, audio compressor, adding reverb, delay, distortion.

When you go to the web-site , you can choose your desired file right away and the site will open it in a waveform. Now, the Normalize option is in the Effects (in the menu on the top). Click on it.

The window opened will show the option to Normalize Left and Right Equally, and it also doesn’t give you decibels – instead, you can choose the percentage on how you would like it to be normalized.

Then, surely, click on the Normalize Audio button and enjoy the result – the waveform itself will show you how different the file becomes…

Audio online convert

This is the tool mostly to be used to convert to different audio formats. In the process if converting audio, you will be able to normalize audio too, as well as change bitrate, sample rate, audio channels, and more.

Go to Audio Online Convert . Of course, click on Choose File and find the track you want to normalize.

Below, you have some settings you can work on, which we have already mentioned. So, if we focus on our article’s topic, you need to find the option Normalize audio, and check the box there. Then, click to Start and the web-site will work on the track according to what you decided to change there. You will have a little while your file is being processed.

So, when it is completed and your file is ready, just click on Download and you are ready to use it as you like.

Audio editor

The DikTorov Audio Editor is an online app to edit audio, normalize audio, or fade in / out audio. It offers: real-time editing and playback of audio files, supports all popular audio formats, and exports as WAV.

Go to the web-site , choose your file and drag it in the blue space in the center.

Now, find the blue Normalize Volume button on the top form the audio waveform, notice that on the right of it, you can change the dBs, and fill in your desired max peak decibel. Then, click on the button Normalize Volume, and the setting will be applied onto your track.

fConvert Online Converter

fConvert is an audio converter service that converts any audio file to any format. There, you can: normalize audio, change sample rate, change file format.

Go to the fConvert , Choose File from your computer, do the settings, and don’t forget to check in the box next to Normalize at the end of the settings.

For the conversion process to start, click on fConvert. Then, scroll down a little, and you’ll find that there is a Result you can already download!

Boost MP3 Volume

The MP3 Volume tool can increase or decrease the volume of any MP3 file online, change file from 1 to 25 decibels, and adjust one or both audio channels.

Open the web-site in your browser, select MP3 file, which should be no more than 150 MB, and take care of the settings.

So, as we mentioned, here you can increase or decrease the volume, and choose your desired max peak (3 decibels recommended everywhere!), and select channels – both or only right or left.

Then, click on Submit Now, wait a little while your file is being uploaded, and once it is finished, you will see the download link on the top of the settings box.

MP3Cut Change Volume

The volume changer app lets you increase audio volume while maintaining the original audio quality. It supports all audio file formats including MP3, M4A, WAV, M4R, FLAC… as an audio converter, it lets you save files in any desired format. Of course, it doesn’t require that you have any technical skills, just move the slider to adjust the volume. It’s very easy to use and offers unlimited file size.

Open MP3Cut , and click on Open file.

Now, instead of Normalize, in this case, you will have to look for the word Equalizer, which you can find in Audio Tools on the top menu. Click on it, wait, and you will see the sliders appear below the waveform of the track.

The sophisticated app also lets you choose the options to select the one most compatible with your audio track, such as: Default (it can be anything, surely), Classic, Dance, Laptop speakers, Live, Party, etc…

You can equalize your track by playing around with the sliders, and then save the result when you are satisfied with the result.

Audio Alter Volume Changer

You can raise or lower the volume of any audio file using this free online tool. Its main advantages are that it’s fast and easy to use, and supports MP4, WAV, FLAC, OGG.

After opening the web-site , now click on Browse computer button to select your file. It will prepare your file and as in most cases, the waveform will appear.

Below, there is a decibels line, where you can once again select your desired max peak dB.

After you have set your dB to the desired amount, click on Submit and wait while your file is being processed. After that, when the audio is converted, you can download it, and also, go back to the main page and edit another file.

Audio Trimmer Volume Booster

This is a free online audio file volume booster. With it, you can very easily increase the volume of songs and make your MP3s louder. Supported formats are: MP3, WAV, WMA, OGG, M4R, M4A, FLAC, AIFF.

Open the site , and find a black line where you will see the option to upload your track. Click on Choose File and select your desired track from your computer.

Now, on the right side under the black line where we uploaded our file, you can see the Loudness options. Click on it and choose from the following: Mild, Moderate, High, and Extreme. Once you have chosen, click on Boost Volume. It will process and in a few seconds, you will have your file ready for download!

Normalize audio in Wondershare Filmora X

Now, even though we already know 10 (which is a lot!) free online normalizers, and we really hope you will be able to choose among them and reach your goal in an easy way, it might be even better if we know some more about normalizing audios using a software.

It is almost as easy to use, but what if you need some more editing opportunities, and with a simple interface? – in this case, worth discussing is a software called Wondershare Filmora X , which helps us have a wonderful, and share-able results. (as the name itself suggests!) It is an actual video editor, and many people all around the world enjoy its presence, especially the ones who don’t want to use a program so sophisticated and complicated for them to require learning for months, but try to have some main editing tools at hand. Filmora operates on Mac and Windows, its interface is very easily understandable for beginners right away. It’s worth noting that not a long ago, Wondershare Filmora X introduced the feature to normalize the audio for the first time. So, go on, download the latest version of Filmora X, and follow along the detailed step by step guideline to normalize audio there!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Click and drag the video of which the audio you want to normalize. Select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

You will see that there is a kind of graphic before your eyes, and if you can see that the waveform is not so equal, you can be pretty sure without even listening, that the noises are so much different from each other, which makes us understand once more, how useful and sometimes, even necessary, audio normalization can be:

Select the files you want to balance, right-click and click on Adjust Audio. New panel will be opened on left top and there, you will see Auto Normalization appear – check the box next to it.

After you have clicked on it, wait until the normalization completes.

With it being done, all your audio clips will be normalized, you will now be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is not a noticeable difference between how they really sound. So, now you can just go and save the file you have just normalized!

So, in this article, we have learned about audio normalization, we have answered some questions about what it is, why and when do we need it, which are the 10 best online editors that will help us normalize our audio tracks without really wasting a lot of time and installing a software, but we also touched upon one software Wondershare Filmora X which can help us carry out the same task in no time. The best thing we can learn from this article is that there are just countless ways of doing one thing, and in today’s world, we are full of resources to reach our targets and aims. So, we hope this article helped you choose your favorite tool, and facilitate working on the audios for you – until next time!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Click and drag the video of which the audio you want to normalize. Select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

You will see that there is a kind of graphic before your eyes, and if you can see that the waveform is not so equal, you can be pretty sure without even listening, that the noises are so much different from each other, which makes us understand once more, how useful and sometimes, even necessary, audio normalization can be:

Select the files you want to balance, right-click and click on Adjust Audio. New panel will be opened on left top and there, you will see Auto Normalization appear – check the box next to it.

After you have clicked on it, wait until the normalization completes.

With it being done, all your audio clips will be normalized, you will now be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is not a noticeable difference between how they really sound. So, now you can just go and save the file you have just normalized!

So, in this article, we have learned about audio normalization, we have answered some questions about what it is, why and when do we need it, which are the 10 best online editors that will help us normalize our audio tracks without really wasting a lot of time and installing a software, but we also touched upon one software Wondershare Filmora X which can help us carry out the same task in no time. The best thing we can learn from this article is that there are just countless ways of doing one thing, and in today’s world, we are full of resources to reach our targets and aims. So, we hope this article helped you choose your favorite tool, and facilitate working on the audios for you – until next time!

Mastering Sound Levels: Adjusting Volume on Audacity

Audacity is a free, open access, cross-platform sound editing and recording tool. It is compatible with Windows, Mac OS X, Linux, and various other operating systems. All of these aspects have contributed to Audacity’s worldwide popularity. Audacity features an amplified effect that alters the loudness of your chosen audio and other practical tools that can change the sound in different ways.

As a result, Audacity can not only assist you in modifying the level of an audio file, but it can also help you equalize, reduce, normalize, and so on.

Yes, you have heard it right, Audacity increase volume, but the primary question is how? But don’t worry, you will get the answer after reading the article. This article will explain how you can increase or decrease the volume of a whole and a specific segment of the audio file. Let’s get started.

In this article

01 How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

Enhancing Your Gaming Experience: Incorporating Audio with KineMaster

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Finding the right app to help you edit videos can be a bit of a chore. Finding a video editor that helps you seamlessly on the go can help immensely. If you’re looking for specific functions like how to add music on KineMaster.

The KineMaster app is ideally suited for beginners who have just taken an interest in learning video editing or professionals. It’s perfect if you’re just in it to create a celebratory video for special occasions like birthdays, weddings, anniversaries, or other special events.

It can also help you bring your A-game to the field if you’re a professional video editor looking to do serious work for clients. It’s easier to use than desktop video editing software.

In this article

01 [Basic introduction about KineMaster](#Part 1)

02 [How to add music to KineMaster](#Part 2)

03 [How to add Youtube/Spotify Music to KineMaster](#Part 3)

04 [Besides Adding Music, Here’s What You Can Do With KineMaster ](#Part 4)

Part 1 Basic introduction about KineMaster

KineMaster is a video editing app available for free download. It’s supported on both Android and iOS. It’s packed with many editing features, some commonplace and others advanced. This is why it’s the perfect app to learn how to add music in KineMaster.

You can download the app for free. It comes with a premium subscription that unlocks advanced features and tools. You can use KineMaster on your mobile to arrange scenes, transitions, and tools to cut, trim and edit videos as well as images. You can utilize layer support to create cinematic enhancements for your videos.

You can correct colors with color grading and create vibrant videos bursting with color and life. You can use blending modes, add effects and use graphics directly on the video with customized layers. One thing to note is that the free version of the videos comes with a watermark.

As for audio, it’s a simple matter to learn how to add music to video in KineMaster. Let’s look at how to add music in KineMaster iOS and Android. The Play Store version can help you with how to add music to KineMaster on Chromebook as well.

Part 2 How to add music to KineMaster

Follow these simple steps after downloading the app to your phone. After you enter KineMaster, you’ll be greeted by a home page that offers the chance to start a new project or continue to edit an existing one.

If you want to load an existing video on the app, then go to the media section. This means tapping on the ‘Audio’ icon option. It will allow you to browse your phone for images and videos you want to load on your phone. Tap the checkmark on the right-hand corner to add the video to the project. With the footage chosen, all that’s left is to add music to KineMaster.

Now let’s look at how to add music to a video in KineMaster. The first thing you need to do is decide if you want to choose a custom track or know how to add music to KineMaster without ‘my media.’

KineMaster’s premium edition comes with its library. In the meantime, we’ll have to use the tracks of our preference. So let’s get back to how to add music in KineMaster video.

When choosing a custom track, know what file you’re opting for. It’s simple to do when you know how to add music to video in KineMaster. It can support audio files in mp3, wav, m4v formats.

Once you’ve picked the appropriate file, you can choose the big red ‘Plus’ sign at the end of the file name. This will add audio to the video file. With this, you now know how to add music to a video on KineMaster.

Once you’re done with editing your video file, you can simply tap on the export symbol on the right-hand corner of the app.

Part 3 How to add Youtube/Spotify Music to KineMaster

How To Add Music To A KineMaster Video Using Youtube Audio Library

Now let’s tap into the knowledge for the YouTube edition of how to add music into KineMaster. You can source the free music from YouTube’s creator studio. It offers many options for copyright-free music. In all cases, you must credit the artist, and some artists may request you to contribute in exchange for their art.

YouTube allows users to download the audio file as an mp3. You can then use this mp3 file in KineMaster. To do so you. Once you’ve imported the video file, you can then choose how to add music to KineMaster.

Tap the ‘Media’ button to browse the audio file you want to include. Click on the big red plus encircled by a circle at the end of the file name.

How To Add Music To A KineMaster Video Using Spotify Audio

Unfortunately, all of Spotify’s tracks are exclusively licensed for usage only within the software. It cannot simply import Spotify audio into video editors like KineMaster for additional editing.

However, if you could export the relevant files to your mobile device. We can help you know how you can learn how to add music to KineMaster on iPad or any android device.

● Tap on ‘Media’

● Browse files until you locate the audio track

● Click on the encircled red plus sign.

● Edit track to fit your video

● Export video

That, dear readers, is how to add music to KineMaster.

Part 4 Besides Adding Music, Here’s What You Can Do With KineMaster

KineMaster is the best video editor app available for mobile devices. With extensive availability ranging from iPads to Chromebooks and everything in between. It’s easy to edit on the go.

It’s convenient when you’re editing while traveling or if you hate sitting still to work. It’s powerful to help you perform the tasks you need to while light enough to support on mobile.

Let’s look at some of the features available on KineMaster.

Trim/Split Video

You can customize a single clip from a longer video or trim the video for a highlights reel. Tap on the scissors option to open a window with four options.

The first is to trim to the ‘left of playhead’ (cuts before), trim to ‘right of playhead’ (cuts after), ‘split at playhead’ (splits the video into two). The final option is to ‘split and insert freeze frame.’ These options give you a lot of control over the video.

Video Transitions

You have many transitions ranging from 3D transitions to transitions for text or picture in picture options. Once you’ve selected the transition, tap on the tick mark at the top right corner to apply the effect.

Handwriting

This lets you handwrite messages, doodles, and more as a layer on top of your video. It can add a personal and creative flair to the video. When used in conjunction with the animation effects, you can expand the scope of use. You can enrich your videos with detailed and hand-drawn assists.

Animations

One of the better aspects of the KineMaster app is that you can animate individual elements in your video. Each animation has its layer. There are three types of animation.

For instance, ‘in animation’ guides how the animation enters. The ‘out animation’ can be used at the end of a clip or when characters exit. ‘Overall animations’ are sustained throughout the video. You have the option to customize animations.

Suppose you’re looking for a powerful video editor like KineMaster for your desktop/PC. Look no further thanWondershare Filmora. The software program is a powerful tool for video editing available for both Windows and macOS.

It’s the perfect blend of skill and automation that lets users showcase their talents. Both novices and industry professionals can use Filmora video editing with ease. It boasts a broader range of features and effects to draw on. With advanced video editing capabilities, you can never go wrong when using Wondershare Filmora.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

KineMaster is among the greatest Android and iPhone video editing apps. This program allows users to edit films with a few basic tricks to look sophisticated. You can learn how to add music to KineMaster easily. With or without experience, everyone can spice up a video with its simple interface and robust capabilities.

Similarly, video editing from your smartphone is another one of the many methods to expand your creative horizons. Another is to use Wondershare Filmora video editing software.

Try It Free Try It Free

Finding the right app to help you edit videos can be a bit of a chore. Finding a video editor that helps you seamlessly on the go can help immensely. If you’re looking for specific functions like how to add music on KineMaster.

The KineMaster app is ideally suited for beginners who have just taken an interest in learning video editing or professionals. It’s perfect if you’re just in it to create a celebratory video for special occasions like birthdays, weddings, anniversaries, or other special events.

It can also help you bring your A-game to the field if you’re a professional video editor looking to do serious work for clients. It’s easier to use than desktop video editing software.

In this article

01 [Basic introduction about KineMaster](#Part 1)

02 [How to add music to KineMaster](#Part 2)

03 [How to add Youtube/Spotify Music to KineMaster](#Part 3)

04 [Besides Adding Music, Here’s What You Can Do With KineMaster ](#Part 4)

Part 1 Basic introduction about KineMaster

KineMaster is a video editing app available for free download. It’s supported on both Android and iOS. It’s packed with many editing features, some commonplace and others advanced. This is why it’s the perfect app to learn how to add music in KineMaster.

You can download the app for free. It comes with a premium subscription that unlocks advanced features and tools. You can use KineMaster on your mobile to arrange scenes, transitions, and tools to cut, trim and edit videos as well as images. You can utilize layer support to create cinematic enhancements for your videos.

You can correct colors with color grading and create vibrant videos bursting with color and life. You can use blending modes, add effects and use graphics directly on the video with customized layers. One thing to note is that the free version of the videos comes with a watermark.

As for audio, it’s a simple matter to learn how to add music to video in KineMaster. Let’s look at how to add music in KineMaster iOS and Android. The Play Store version can help you with how to add music to KineMaster on Chromebook as well.

Part 2 How to add music to KineMaster

Follow these simple steps after downloading the app to your phone. After you enter KineMaster, you’ll be greeted by a home page that offers the chance to start a new project or continue to edit an existing one.

If you want to load an existing video on the app, then go to the media section. This means tapping on the ‘Audio’ icon option. It will allow you to browse your phone for images and videos you want to load on your phone. Tap the checkmark on the right-hand corner to add the video to the project. With the footage chosen, all that’s left is to add music to KineMaster.

Now let’s look at how to add music to a video in KineMaster. The first thing you need to do is decide if you want to choose a custom track or know how to add music to KineMaster without ‘my media.’

KineMaster’s premium edition comes with its library. In the meantime, we’ll have to use the tracks of our preference. So let’s get back to how to add music in KineMaster video.

When choosing a custom track, know what file you’re opting for. It’s simple to do when you know how to add music to video in KineMaster. It can support audio files in mp3, wav, m4v formats.

Once you’ve picked the appropriate file, you can choose the big red ‘Plus’ sign at the end of the file name. This will add audio to the video file. With this, you now know how to add music to a video on KineMaster.

Once you’re done with editing your video file, you can simply tap on the export symbol on the right-hand corner of the app.

Part 3 How to add Youtube/Spotify Music to KineMaster

How To Add Music To A KineMaster Video Using Youtube Audio Library

Now let’s tap into the knowledge for the YouTube edition of how to add music into KineMaster. You can source the free music from YouTube’s creator studio. It offers many options for copyright-free music. In all cases, you must credit the artist, and some artists may request you to contribute in exchange for their art.

YouTube allows users to download the audio file as an mp3. You can then use this mp3 file in KineMaster. To do so you. Once you’ve imported the video file, you can then choose how to add music to KineMaster.

Tap the ‘Media’ button to browse the audio file you want to include. Click on the big red plus encircled by a circle at the end of the file name.

How To Add Music To A KineMaster Video Using Spotify Audio

Unfortunately, all of Spotify’s tracks are exclusively licensed for usage only within the software. It cannot simply import Spotify audio into video editors like KineMaster for additional editing.

However, if you could export the relevant files to your mobile device. We can help you know how you can learn how to add music to KineMaster on iPad or any android device.

● Tap on ‘Media’

● Browse files until you locate the audio track

● Click on the encircled red plus sign.

● Edit track to fit your video

● Export video

That, dear readers, is how to add music to KineMaster.

Part 4 Besides Adding Music, Here’s What You Can Do With KineMaster

KineMaster is the best video editor app available for mobile devices. With extensive availability ranging from iPads to Chromebooks and everything in between. It’s easy to edit on the go.

It’s convenient when you’re editing while traveling or if you hate sitting still to work. It’s powerful to help you perform the tasks you need to while light enough to support on mobile.

Let’s look at some of the features available on KineMaster.

Trim/Split Video

You can customize a single clip from a longer video or trim the video for a highlights reel. Tap on the scissors option to open a window with four options.

The first is to trim to the ‘left of playhead’ (cuts before), trim to ‘right of playhead’ (cuts after), ‘split at playhead’ (splits the video into two). The final option is to ‘split and insert freeze frame.’ These options give you a lot of control over the video.

Video Transitions

You have many transitions ranging from 3D transitions to transitions for text or picture in picture options. Once you’ve selected the transition, tap on the tick mark at the top right corner to apply the effect.

Handwriting

This lets you handwrite messages, doodles, and more as a layer on top of your video. It can add a personal and creative flair to the video. When used in conjunction with the animation effects, you can expand the scope of use. You can enrich your videos with detailed and hand-drawn assists.

Animations

One of the better aspects of the KineMaster app is that you can animate individual elements in your video. Each animation has its layer. There are three types of animation.

For instance, ‘in animation’ guides how the animation enters. The ‘out animation’ can be used at the end of a clip or when characters exit. ‘Overall animations’ are sustained throughout the video. You have the option to customize animations.

Suppose you’re looking for a powerful video editor like KineMaster for your desktop/PC. Look no further thanWondershare Filmora. The software program is a powerful tool for video editing available for both Windows and macOS.

It’s the perfect blend of skill and automation that lets users showcase their talents. Both novices and industry professionals can use Filmora video editing with ease. It boasts a broader range of features and effects to draw on. With advanced video editing capabilities, you can never go wrong when using Wondershare Filmora.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

KineMaster is among the greatest Android and iPhone video editing apps. This program allows users to edit films with a few basic tricks to look sophisticated. You can learn how to add music to KineMaster easily. With or without experience, everyone can spice up a video with its simple interface and robust capabilities.

Similarly, video editing from your smartphone is another one of the many methods to expand your creative horizons. Another is to use Wondershare Filmora video editing software.

Try It Free Try It Free

Finding the right app to help you edit videos can be a bit of a chore. Finding a video editor that helps you seamlessly on the go can help immensely. If you’re looking for specific functions like how to add music on KineMaster.

The KineMaster app is ideally suited for beginners who have just taken an interest in learning video editing or professionals. It’s perfect if you’re just in it to create a celebratory video for special occasions like birthdays, weddings, anniversaries, or other special events.

It can also help you bring your A-game to the field if you’re a professional video editor looking to do serious work for clients. It’s easier to use than desktop video editing software.

In this article

01 [Basic introduction about KineMaster](#Part 1)

02 [How to add music to KineMaster](#Part 2)

03 [How to add Youtube/Spotify Music to KineMaster](#Part 3)

04 [Besides Adding Music, Here’s What You Can Do With KineMaster ](#Part 4)

Part 1 Basic introduction about KineMaster

KineMaster is a video editing app available for free download. It’s supported on both Android and iOS. It’s packed with many editing features, some commonplace and others advanced. This is why it’s the perfect app to learn how to add music in KineMaster.

You can download the app for free. It comes with a premium subscription that unlocks advanced features and tools. You can use KineMaster on your mobile to arrange scenes, transitions, and tools to cut, trim and edit videos as well as images. You can utilize layer support to create cinematic enhancements for your videos.

You can correct colors with color grading and create vibrant videos bursting with color and life. You can use blending modes, add effects and use graphics directly on the video with customized layers. One thing to note is that the free version of the videos comes with a watermark.

As for audio, it’s a simple matter to learn how to add music to video in KineMaster. Let’s look at how to add music in KineMaster iOS and Android. The Play Store version can help you with how to add music to KineMaster on Chromebook as well.

Part 2 How to add music to KineMaster

Follow these simple steps after downloading the app to your phone. After you enter KineMaster, you’ll be greeted by a home page that offers the chance to start a new project or continue to edit an existing one.

If you want to load an existing video on the app, then go to the media section. This means tapping on the ‘Audio’ icon option. It will allow you to browse your phone for images and videos you want to load on your phone. Tap the checkmark on the right-hand corner to add the video to the project. With the footage chosen, all that’s left is to add music to KineMaster.

Now let’s look at how to add music to a video in KineMaster. The first thing you need to do is decide if you want to choose a custom track or know how to add music to KineMaster without ‘my media.’

KineMaster’s premium edition comes with its library. In the meantime, we’ll have to use the tracks of our preference. So let’s get back to how to add music in KineMaster video.

When choosing a custom track, know what file you’re opting for. It’s simple to do when you know how to add music to video in KineMaster. It can support audio files in mp3, wav, m4v formats.

Once you’ve picked the appropriate file, you can choose the big red ‘Plus’ sign at the end of the file name. This will add audio to the video file. With this, you now know how to add music to a video on KineMaster.

Once you’re done with editing your video file, you can simply tap on the export symbol on the right-hand corner of the app.

Part 3 How to add Youtube/Spotify Music to KineMaster

How To Add Music To A KineMaster Video Using Youtube Audio Library

Now let’s tap into the knowledge for the YouTube edition of how to add music into KineMaster. You can source the free music from YouTube’s creator studio. It offers many options for copyright-free music. In all cases, you must credit the artist, and some artists may request you to contribute in exchange for their art.

YouTube allows users to download the audio file as an mp3. You can then use this mp3 file in KineMaster. To do so you. Once you’ve imported the video file, you can then choose how to add music to KineMaster.

Tap the ‘Media’ button to browse the audio file you want to include. Click on the big red plus encircled by a circle at the end of the file name.

How To Add Music To A KineMaster Video Using Spotify Audio

Unfortunately, all of Spotify’s tracks are exclusively licensed for usage only within the software. It cannot simply import Spotify audio into video editors like KineMaster for additional editing.

However, if you could export the relevant files to your mobile device. We can help you know how you can learn how to add music to KineMaster on iPad or any android device.

● Tap on ‘Media’

● Browse files until you locate the audio track

● Click on the encircled red plus sign.

● Edit track to fit your video

● Export video

That, dear readers, is how to add music to KineMaster.

Part 4 Besides Adding Music, Here’s What You Can Do With KineMaster

KineMaster is the best video editor app available for mobile devices. With extensive availability ranging from iPads to Chromebooks and everything in between. It’s easy to edit on the go.

It’s convenient when you’re editing while traveling or if you hate sitting still to work. It’s powerful to help you perform the tasks you need to while light enough to support on mobile.

Let’s look at some of the features available on KineMaster.

Trim/Split Video

You can customize a single clip from a longer video or trim the video for a highlights reel. Tap on the scissors option to open a window with four options.

The first is to trim to the ‘left of playhead’ (cuts before), trim to ‘right of playhead’ (cuts after), ‘split at playhead’ (splits the video into two). The final option is to ‘split and insert freeze frame.’ These options give you a lot of control over the video.

Video Transitions

You have many transitions ranging from 3D transitions to transitions for text or picture in picture options. Once you’ve selected the transition, tap on the tick mark at the top right corner to apply the effect.

Handwriting

This lets you handwrite messages, doodles, and more as a layer on top of your video. It can add a personal and creative flair to the video. When used in conjunction with the animation effects, you can expand the scope of use. You can enrich your videos with detailed and hand-drawn assists.

Animations

One of the better aspects of the KineMaster app is that you can animate individual elements in your video. Each animation has its layer. There are three types of animation.

For instance, ‘in animation’ guides how the animation enters. The ‘out animation’ can be used at the end of a clip or when characters exit. ‘Overall animations’ are sustained throughout the video. You have the option to customize animations.

Suppose you’re looking for a powerful video editor like KineMaster for your desktop/PC. Look no further thanWondershare Filmora. The software program is a powerful tool for video editing available for both Windows and macOS.

It’s the perfect blend of skill and automation that lets users showcase their talents. Both novices and industry professionals can use Filmora video editing with ease. It boasts a broader range of features and effects to draw on. With advanced video editing capabilities, you can never go wrong when using Wondershare Filmora.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

KineMaster is among the greatest Android and iPhone video editing apps. This program allows users to edit films with a few basic tricks to look sophisticated. You can learn how to add music to KineMaster easily. With or without experience, everyone can spice up a video with its simple interface and robust capabilities.

Similarly, video editing from your smartphone is another one of the many methods to expand your creative horizons. Another is to use Wondershare Filmora video editing software.

Try It Free Try It Free

Finding the right app to help you edit videos can be a bit of a chore. Finding a video editor that helps you seamlessly on the go can help immensely. If you’re looking for specific functions like how to add music on KineMaster.

The KineMaster app is ideally suited for beginners who have just taken an interest in learning video editing or professionals. It’s perfect if you’re just in it to create a celebratory video for special occasions like birthdays, weddings, anniversaries, or other special events.

It can also help you bring your A-game to the field if you’re a professional video editor looking to do serious work for clients. It’s easier to use than desktop video editing software.

In this article

01 [Basic introduction about KineMaster](#Part 1)

02 [How to add music to KineMaster](#Part 2)

03 [How to add Youtube/Spotify Music to KineMaster](#Part 3)

04 [Besides Adding Music, Here’s What You Can Do With KineMaster ](#Part 4)

Part 1 Basic introduction about KineMaster

KineMaster is a video editing app available for free download. It’s supported on both Android and iOS. It’s packed with many editing features, some commonplace and others advanced. This is why it’s the perfect app to learn how to add music in KineMaster.

You can download the app for free. It comes with a premium subscription that unlocks advanced features and tools. You can use KineMaster on your mobile to arrange scenes, transitions, and tools to cut, trim and edit videos as well as images. You can utilize layer support to create cinematic enhancements for your videos.

You can correct colors with color grading and create vibrant videos bursting with color and life. You can use blending modes, add effects and use graphics directly on the video with customized layers. One thing to note is that the free version of the videos comes with a watermark.

As for audio, it’s a simple matter to learn how to add music to video in KineMaster. Let’s look at how to add music in KineMaster iOS and Android. The Play Store version can help you with how to add music to KineMaster on Chromebook as well.

Part 2 How to add music to KineMaster

Follow these simple steps after downloading the app to your phone. After you enter KineMaster, you’ll be greeted by a home page that offers the chance to start a new project or continue to edit an existing one.

If you want to load an existing video on the app, then go to the media section. This means tapping on the ‘Audio’ icon option. It will allow you to browse your phone for images and videos you want to load on your phone. Tap the checkmark on the right-hand corner to add the video to the project. With the footage chosen, all that’s left is to add music to KineMaster.

Now let’s look at how to add music to a video in KineMaster. The first thing you need to do is decide if you want to choose a custom track or know how to add music to KineMaster without ‘my media.’

KineMaster’s premium edition comes with its library. In the meantime, we’ll have to use the tracks of our preference. So let’s get back to how to add music in KineMaster video.

When choosing a custom track, know what file you’re opting for. It’s simple to do when you know how to add music to video in KineMaster. It can support audio files in mp3, wav, m4v formats.

Once you’ve picked the appropriate file, you can choose the big red ‘Plus’ sign at the end of the file name. This will add audio to the video file. With this, you now know how to add music to a video on KineMaster.

Once you’re done with editing your video file, you can simply tap on the export symbol on the right-hand corner of the app.

Part 3 How to add Youtube/Spotify Music to KineMaster

How To Add Music To A KineMaster Video Using Youtube Audio Library

Now let’s tap into the knowledge for the YouTube edition of how to add music into KineMaster. You can source the free music from YouTube’s creator studio. It offers many options for copyright-free music. In all cases, you must credit the artist, and some artists may request you to contribute in exchange for their art.

YouTube allows users to download the audio file as an mp3. You can then use this mp3 file in KineMaster. To do so you. Once you’ve imported the video file, you can then choose how to add music to KineMaster.

Tap the ‘Media’ button to browse the audio file you want to include. Click on the big red plus encircled by a circle at the end of the file name.

How To Add Music To A KineMaster Video Using Spotify Audio

Unfortunately, all of Spotify’s tracks are exclusively licensed for usage only within the software. It cannot simply import Spotify audio into video editors like KineMaster for additional editing.

However, if you could export the relevant files to your mobile device. We can help you know how you can learn how to add music to KineMaster on iPad or any android device.

● Tap on ‘Media’

● Browse files until you locate the audio track

● Click on the encircled red plus sign.

● Edit track to fit your video

● Export video

That, dear readers, is how to add music to KineMaster.

Part 4 Besides Adding Music, Here’s What You Can Do With KineMaster

KineMaster is the best video editor app available for mobile devices. With extensive availability ranging from iPads to Chromebooks and everything in between. It’s easy to edit on the go.

It’s convenient when you’re editing while traveling or if you hate sitting still to work. It’s powerful to help you perform the tasks you need to while light enough to support on mobile.

Let’s look at some of the features available on KineMaster.

Trim/Split Video

You can customize a single clip from a longer video or trim the video for a highlights reel. Tap on the scissors option to open a window with four options.

The first is to trim to the ‘left of playhead’ (cuts before), trim to ‘right of playhead’ (cuts after), ‘split at playhead’ (splits the video into two). The final option is to ‘split and insert freeze frame.’ These options give you a lot of control over the video.

Video Transitions

You have many transitions ranging from 3D transitions to transitions for text or picture in picture options. Once you’ve selected the transition, tap on the tick mark at the top right corner to apply the effect.

Handwriting

This lets you handwrite messages, doodles, and more as a layer on top of your video. It can add a personal and creative flair to the video. When used in conjunction with the animation effects, you can expand the scope of use. You can enrich your videos with detailed and hand-drawn assists.

Animations

One of the better aspects of the KineMaster app is that you can animate individual elements in your video. Each animation has its layer. There are three types of animation.

For instance, ‘in animation’ guides how the animation enters. The ‘out animation’ can be used at the end of a clip or when characters exit. ‘Overall animations’ are sustained throughout the video. You have the option to customize animations.

Suppose you’re looking for a powerful video editor like KineMaster for your desktop/PC. Look no further thanWondershare Filmora. The software program is a powerful tool for video editing available for both Windows and macOS.

It’s the perfect blend of skill and automation that lets users showcase their talents. Both novices and industry professionals can use Filmora video editing with ease. It boasts a broader range of features and effects to draw on. With advanced video editing capabilities, you can never go wrong when using Wondershare Filmora.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

KineMaster is among the greatest Android and iPhone video editing apps. This program allows users to edit films with a few basic tricks to look sophisticated. You can learn how to add music to KineMaster easily. With or without experience, everyone can spice up a video with its simple interface and robust capabilities.

Similarly, video editing from your smartphone is another one of the many methods to expand your creative horizons. Another is to use Wondershare Filmora video editing software.

Also read: