The Technician’s Guide to Transforming Distorted Audio Into High-Quality Video Content

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

“Leading Technologies to Minimize Ambient Noises in Your Recordings”

Having background noise removal apps has become a necessity for content creators. If you want to create quality content, it’s essential to have clean audio. Background noise creates disruption for listeners to hear the content in any recording. AI noise reduction algorithms assist in removing undesired background noise from audio recordings. It includes noise generated from hisses, reverb, and wind in recordings.

To remove undesired background noise , you need an excellent AI tool. This page will give you a proper guide on which apps to use and how to remove the noise with ease. So, dive into the article to discover the top audio noise removal apps.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1: What Are Few Audio Level Enhancements Observed in The Editing Industry Over the Past Years?

Technological innovations in audio management have led to major enhancements in its editing. Some of the noteworthy audio-level enhancements are focused on as follows:

Machine Learning for Sound Analyzing

Developments in AI and ML have allowed for audio identification and classification. This has facilitated the search for aspects within recordings.

Loudness Standards

Users look for constant audio levels across various platforms and devices. Normalizing procedures and loudness standards should be implemented to enhance the listening experience. The level of loudness shouldn’t change again and again.

Noise Reduction and Restoration

Enhanced techniques and algorithms for noise reduction are a must-have across any platform. It helps restore damaged audio recordings and remove undesirable background noise.

Audio Restoration of Old Tracks

With specialized instruments, historical and cultural elements can be preserved. Vintage audio recordings are revitalized and enhanced with audio editing. Audio restoration can give a new life to your old tracks and increase their quality.

Advanced Equalization

It has been realized to go for sophisticated choices for equalization and filtering. This gives you control over the frequency response and tonal balance of your audio. The equalized audio upscales the sound of your video as well.

AI Integration

The use of AI in audio editing software enables the automation of several activities. This includes noise removal, audio augmentation, and speech-to-text transcription.

Part 2: Finding Out Some Top iOS Apps for Reducing Background Noise

Apple has many background noise removal apps for iPhones. The top AI apps proven to be fruitful are discussed below.

• AudioFix: For Videos + Volume
• Noise Eraser
• Noise Destroyer
• Sound Editor: Audio Changer
• Noise Reducer – audio enhancer

1. AudioFix: For Videos + Volume

With AudioFix, you can immediately enhance, mute, extract, or amplify your videos’ audio. The tool raises the volume and cleans up the audio when you import a movie. You can optimize the loudness and clean up the sound of any video. It is an essential tool for YouTubers, filmmakers, and anyone looking to add better, more professional sound to their videos.

Key Features

• The tool boosts your video by increasing the quality of your audio file and improving its volume.
• Noise reduction is done in seconds with the noise reduction filters offered by the app.
• You can extract any sound from the video and add another audio sound or leave it like that.

2. Noise Eraser

The AI system of the Noise Eraser is trained to learn from noise reduction techniques. These techniques are used by experienced sound engineers with the aid of about 10,000 voice and noise samples. The tool employs artificial intelligence to distinguish between noises other than human speech. It’s a fantastic tool for sound editing and noise reduction.

Key Features

• The AI-powered recognition feature can differentiate between human and background noises. Furthermore, it also eliminates all unnecessary sounds.
• The noise reduction app can clean the audio and give high-quality results.
• Its sound adjustment feature can tune the sound according to the user’s needs.

3. Noise Destroyer

Noise Destroyer is a straightforward tool that selects an audio or video clip and eliminates background noise. It’s simple to use and equipped with a modern noise-cancellation engine. This makes it a great app to remove background noise from audio and leave it clear and sharp. The tool is compatible with all Apple devices and works for free.

Key Features

• To isolate only your speech, you can remove background noise from your audio and video recordings using its noise remover.
• The tool allows you to delete the music track and keep your voice so you sound clear and perfect.
• Any non-human sound is automatically detected and removed by the app.

4. Sound Editor: Audio Changer

The most potent program for expert multitrack audio file editing for iOS is Sound Editor. You can use every instrument and audio effect, whether you record your music or import it. Sound Editor is a reliable tool that gives quality results. Its file format support and specialized features change the customization experience for good.

Key Features

• The multitrack audio editor saves you time and effort by editing songs at once, regardless of their size.
• The app employs a robust 8-band equalization and graded audio effects that are programmable.
• The audio editor can cut, copy, paste, trim, or delete the desired portion of a track with a click.

5. Noise Reducer – audio enhancer

With Noise Reducer, you can add filters to audio and video files to lessen background noise. It also covers other background sounds while maintaining the clarity and audibility of speech. The is dedicated to removing any redundant sound from your audio or video clip. You can improve the sound of your video and audio files from your iPhone, iPad, or Mac by using Noise Reducer.

Key Features

• Noise Reducer removes any background noise; all you need to do is add the media and select the denoising option.
• The tool works with audio and video files, so you don’t have to download different apps for the media types.
• The intelligent system of Noise Reducer works offline as well.

Part 3: Some Top Android Apps for Background Noise Removal

Now that we have discussed the tools for iOS, let’s look at the Android apps to remove background noise from audio.

• Sound Amplifier
• Noice: Natural Calming Noise
• AudioLab: Audio Editor Recorder
• Moises: The Musician’s App
• Remove Noise: Reduce Noise MP3

1. Sound Amplifier

With your Android phone and a pair of headphones, Sound Amplifier helps you to hear ambient sounds. It can remove any unwanted noises, and as a result, you hear the audio more. You can use the Sound Amplifier to enhance, magnify, and filter sounds on your smartphone. These enhancing features make Sound Amplifier one of the best apps to remove background noise from audio.

Key Features

• The conversation mode of the Sound Amplifier assists you in hearing, no matter how noisy your surroundings are.
• Using the audio editor, you can reduce the background noise and upscale your audio by tuning frequencies.
• You can edit the sound even more precisely and hear it closely by wearing headphones. It helps you transfer different sound frequencies in each ear to feel the difference.

2. Noice: Natural Calming Noise

With the help of the Noice application, you can design unique audio settings. It lets you mix various sounds at various loudness levels to produce the ideal ambiance. These personalized audio environments allow you to tune out any noises and give you the perfect atmosphere. You can delete disturbing sounds or set them at a particular frequency to focus on work and studies.

Key Features

• The offline playback lets you listen to the edited sound anytime and anywhere.
• You can create sound mixes, play them with just a tap, and set a sleep timer so that the music will stop once the time is up.
• The tool helps you relax and focus on work by eliminating loud and disturbing sounds and giving you a calm-sounding experience.

3. AudioLab: Audio Editor Recorder

AudioLab: Audio Editor Recorder is a sophisticated audio app for editing, recording, and modifying. It is a great app to remove background noise from videos as well. You can edit your audio files and video sounds like a professional. The editing and noise removal services of AudioLab are amazing.

Key Features

• You can change the audio voice to a range of sounds by using the voice changer of the app.
• The audio merging allows you to mix the audio files and create a whole new, unique sound.
• Using the audio editor, you can trim your audio or delete any part with just a click.

4. Moises: The Musician’s App

Moises app is the ideal tool for instrumental backing tracks, acapella, and karaoke. Its AI mixer and pitch-perfect guitar tabs help you master your audio stems and chords. The tool is known as one of the most extraordinary apps for removing background noise due to its AI-driven vocal removal and stem tool. You can play along with your favorite musicians in any key and at any pace by using Moises.

Key Features

• The brilliant speed changer can change the track’s speed with a single click.
• You can separate the track music and vocals by using the AI audio separator of the tool.
• If you want to get a better idea of the song lyrics, the AI lyrics transcription tool will generate the lyrics for you.

5. Remove Noise: Reduce Noise MP3

Remove Noise: Reduce Noise MP3 helps you to remove or eliminate the background noise. With advanced noise filters available, the tool lets you hear on the music player with the noise reduction function. It serves as an ideal app to reduce or cancel out noise. You can save your audio in several formats without any limitations.

Key Features

• The Audio Denoise can reduce any loud and disturbing sounds like wind and fireworks noise and make it sound less harsh.
• The Traffic and TV noises can be completely removed, giving your audio a clear sound with the audio cleaner Remove Noise.
• The tool supports all basic Android formats, including MP3, MP4, WAV, and M4A. You can choose either one of the formats and save your audio in it.

Bonus Part: Want To Remove Vocals from a Song? Learn How

Vocal removers have proven helpful in different scenarios. Starting from making karaoke noises, it is also used to remix music or extract sections of songs. The audio enhancement functions are available in Android and iPhone apps to remove background noise from video. However, vocal removal tools still need to be found. Fortunately, Wondershare Filmora has recently launched its AI Vocal Remover. It precisely eliminates any vocal sound from audio and video files.

Wondershare Filmora innovated this, keeping in consideration the demands of editors and listeners. Vocals and instrumentals can be separated and used to create more content. The app is an all-in-one media editor consisting of the latest AI tools. You can use it for all your editing needs and create eye-catching and pleasant-sounding content.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Vocal Remover

The AI Vocal Remover tool from Filmora can make video editing easier by providing useful advantages. You can dub any video you choose without masking the existing vocals. It holds the ability to preserve excellent soundtracks and eliminate vocals that don’t fit the film’s energy. With sophisticated algorithms, it removes vocals without sacrificing audio fidelity.

You can now produce a dubbed video that is clear and professional by removing the original voices and adding your voice to the video. Not only is it the best background noise removal app, but it has gained quite praise for removing vocals. You can upload your media and remove the vocals automatically with a single click.

Conclusion

Enhancing and upscaling your audio is essential, especially if you are a content creator. Many audio and video editors seek an app for removing background noise. There are numerous options for noise removal apps, but vocal removal is still a challenge in the audio editing journey.

This article discusses the background noise removal tools and gives an incredible solution to remove vocals. All the mentioned apps are excellent at what they do. You can choose the tool that best fits your needs and edit your content like never before.

Try Filmora out Free! Click here!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download Free Download Learn More

Part 1: What Are Few Audio Level Enhancements Observed in The Editing Industry Over the Past Years?

Technological innovations in audio management have led to major enhancements in its editing. Some of the noteworthy audio-level enhancements are focused on as follows:

Machine Learning for Sound Analyzing

Developments in AI and ML have allowed for audio identification and classification. This has facilitated the search for aspects within recordings.

Loudness Standards

Users look for constant audio levels across various platforms and devices. Normalizing procedures and loudness standards should be implemented to enhance the listening experience. The level of loudness shouldn’t change again and again.

Noise Reduction and Restoration

Enhanced techniques and algorithms for noise reduction are a must-have across any platform. It helps restore damaged audio recordings and remove undesirable background noise.

Audio Restoration of Old Tracks

With specialized instruments, historical and cultural elements can be preserved. Vintage audio recordings are revitalized and enhanced with audio editing. Audio restoration can give a new life to your old tracks and increase their quality.

Advanced Equalization

It has been realized to go for sophisticated choices for equalization and filtering. This gives you control over the frequency response and tonal balance of your audio. The equalized audio upscales the sound of your video as well.

AI Integration

The use of AI in audio editing software enables the automation of several activities. This includes noise removal, audio augmentation, and speech-to-text transcription.

Part 2: Finding Out Some Top iOS Apps for Reducing Background Noise

Apple has many background noise removal apps for iPhones. The top AI apps proven to be fruitful are discussed below.

• AudioFix: For Videos + Volume
• Noise Eraser
• Noise Destroyer
• Sound Editor: Audio Changer
• Noise Reducer – audio enhancer

1. AudioFix: For Videos + Volume

With AudioFix, you can immediately enhance, mute, extract, or amplify your videos’ audio. The tool raises the volume and cleans up the audio when you import a movie. You can optimize the loudness and clean up the sound of any video. It is an essential tool for YouTubers, filmmakers, and anyone looking to add better, more professional sound to their videos.

Key Features

• The tool boosts your video by increasing the quality of your audio file and improving its volume.
• Noise reduction is done in seconds with the noise reduction filters offered by the app.
• You can extract any sound from the video and add another audio sound or leave it like that.

2. Noise Eraser

The AI system of the Noise Eraser is trained to learn from noise reduction techniques. These techniques are used by experienced sound engineers with the aid of about 10,000 voice and noise samples. The tool employs artificial intelligence to distinguish between noises other than human speech. It’s a fantastic tool for sound editing and noise reduction.

Key Features

• The AI-powered recognition feature can differentiate between human and background noises. Furthermore, it also eliminates all unnecessary sounds.
• The noise reduction app can clean the audio and give high-quality results.
• Its sound adjustment feature can tune the sound according to the user’s needs.

3. Noise Destroyer

Noise Destroyer is a straightforward tool that selects an audio or video clip and eliminates background noise. It’s simple to use and equipped with a modern noise-cancellation engine. This makes it a great app to remove background noise from audio and leave it clear and sharp. The tool is compatible with all Apple devices and works for free.

Key Features

• To isolate only your speech, you can remove background noise from your audio and video recordings using its noise remover.
• The tool allows you to delete the music track and keep your voice so you sound clear and perfect.
• Any non-human sound is automatically detected and removed by the app.

4. Sound Editor: Audio Changer

The most potent program for expert multitrack audio file editing for iOS is Sound Editor. You can use every instrument and audio effect, whether you record your music or import it. Sound Editor is a reliable tool that gives quality results. Its file format support and specialized features change the customization experience for good.

Key Features

• The multitrack audio editor saves you time and effort by editing songs at once, regardless of their size.
• The app employs a robust 8-band equalization and graded audio effects that are programmable.
• The audio editor can cut, copy, paste, trim, or delete the desired portion of a track with a click.

5. Noise Reducer – audio enhancer

With Noise Reducer, you can add filters to audio and video files to lessen background noise. It also covers other background sounds while maintaining the clarity and audibility of speech. The is dedicated to removing any redundant sound from your audio or video clip. You can improve the sound of your video and audio files from your iPhone, iPad, or Mac by using Noise Reducer.

Key Features

• Noise Reducer removes any background noise; all you need to do is add the media and select the denoising option.
• The tool works with audio and video files, so you don’t have to download different apps for the media types.
• The intelligent system of Noise Reducer works offline as well.

Part 3: Some Top Android Apps for Background Noise Removal

Now that we have discussed the tools for iOS, let’s look at the Android apps to remove background noise from audio.

• Sound Amplifier
• Noice: Natural Calming Noise
• AudioLab: Audio Editor Recorder
• Moises: The Musician’s App
• Remove Noise: Reduce Noise MP3

1. Sound Amplifier

With your Android phone and a pair of headphones, Sound Amplifier helps you to hear ambient sounds. It can remove any unwanted noises, and as a result, you hear the audio more. You can use the Sound Amplifier to enhance, magnify, and filter sounds on your smartphone. These enhancing features make Sound Amplifier one of the best apps to remove background noise from audio.

Key Features

• The conversation mode of the Sound Amplifier assists you in hearing, no matter how noisy your surroundings are.
• Using the audio editor, you can reduce the background noise and upscale your audio by tuning frequencies.
• You can edit the sound even more precisely and hear it closely by wearing headphones. It helps you transfer different sound frequencies in each ear to feel the difference.

2. Noice: Natural Calming Noise

With the help of the Noice application, you can design unique audio settings. It lets you mix various sounds at various loudness levels to produce the ideal ambiance. These personalized audio environments allow you to tune out any noises and give you the perfect atmosphere. You can delete disturbing sounds or set them at a particular frequency to focus on work and studies.

Key Features

• The offline playback lets you listen to the edited sound anytime and anywhere.
• You can create sound mixes, play them with just a tap, and set a sleep timer so that the music will stop once the time is up.
• The tool helps you relax and focus on work by eliminating loud and disturbing sounds and giving you a calm-sounding experience.

3. AudioLab: Audio Editor Recorder

AudioLab: Audio Editor Recorder is a sophisticated audio app for editing, recording, and modifying. It is a great app to remove background noise from videos as well. You can edit your audio files and video sounds like a professional. The editing and noise removal services of AudioLab are amazing.

Key Features

• You can change the audio voice to a range of sounds by using the voice changer of the app.
• The audio merging allows you to mix the audio files and create a whole new, unique sound.
• Using the audio editor, you can trim your audio or delete any part with just a click.

4. Moises: The Musician’s App

Moises app is the ideal tool for instrumental backing tracks, acapella, and karaoke. Its AI mixer and pitch-perfect guitar tabs help you master your audio stems and chords. The tool is known as one of the most extraordinary apps for removing background noise due to its AI-driven vocal removal and stem tool. You can play along with your favorite musicians in any key and at any pace by using Moises.

Key Features

• The brilliant speed changer can change the track’s speed with a single click.
• You can separate the track music and vocals by using the AI audio separator of the tool.
• If you want to get a better idea of the song lyrics, the AI lyrics transcription tool will generate the lyrics for you.

5. Remove Noise: Reduce Noise MP3

Remove Noise: Reduce Noise MP3 helps you to remove or eliminate the background noise. With advanced noise filters available, the tool lets you hear on the music player with the noise reduction function. It serves as an ideal app to reduce or cancel out noise. You can save your audio in several formats without any limitations.

Key Features

• The Audio Denoise can reduce any loud and disturbing sounds like wind and fireworks noise and make it sound less harsh.
• The Traffic and TV noises can be completely removed, giving your audio a clear sound with the audio cleaner Remove Noise.
• The tool supports all basic Android formats, including MP3, MP4, WAV, and M4A. You can choose either one of the formats and save your audio in it.

Bonus Part: Want To Remove Vocals from a Song? Learn How

Vocal removers have proven helpful in different scenarios. Starting from making karaoke noises, it is also used to remix music or extract sections of songs. The audio enhancement functions are available in Android and iPhone apps to remove background noise from video. However, vocal removal tools still need to be found. Fortunately, Wondershare Filmora has recently launched its AI Vocal Remover. It precisely eliminates any vocal sound from audio and video files.

Wondershare Filmora innovated this, keeping in consideration the demands of editors and listeners. Vocals and instrumentals can be separated and used to create more content. The app is an all-in-one media editor consisting of the latest AI tools. You can use it for all your editing needs and create eye-catching and pleasant-sounding content.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Vocal Remover

The AI Vocal Remover tool from Filmora can make video editing easier by providing useful advantages. You can dub any video you choose without masking the existing vocals. It holds the ability to preserve excellent soundtracks and eliminate vocals that don’t fit the film’s energy. With sophisticated algorithms, it removes vocals without sacrificing audio fidelity.

You can now produce a dubbed video that is clear and professional by removing the original voices and adding your voice to the video. Not only is it the best background noise removal app, but it has gained quite praise for removing vocals. You can upload your media and remove the vocals automatically with a single click.

Conclusion

Enhancing and upscaling your audio is essential, especially if you are a content creator. Many audio and video editors seek an app for removing background noise. There are numerous options for noise removal apps, but vocal removal is still a challenge in the audio editing journey.

This article discusses the background noise removal tools and gives an incredible solution to remove vocals. All the mentioned apps are excellent at what they do. You can choose the tool that best fits your needs and edit your content like never before.

Try Filmora out Free! Click here!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

“Seamless Splitting of Songs: Methods for Dividing Audio Content”

You often come across audio files that we like and enjoy. An uncertain situation usually occurs when you love a small part of the audio, but the complete audio is not per your level. If you encounter any such situation, what will you do? Spend hours to find another audio? Or suffice with what you have got?

What if we give you a third option. How about splitting the audio into smaller parts? Well, this sounds a lot better than the other options. The only thing you need is a good Audio Splitter for doing this. You don’t even have to worry about this because we are about to guide you on how to split audio files. We will share an MP3 splitter online and the steps for both Windows and Mac.

In this article

01 How to Split Audio Files on Windows and Mac?

02 How to Split Audio/MP3 File Online?

Part 1. How to Split Audio Files on Windows and Mac?

Whenever you think about audio editing, Wondershare Filmora is associated with that as the best software. The audio editor is perfect and compatible with both Windows and Mac. Wondershare Filmora never ceases to impress its users with its stunning features.

The audio editor Filmora offers a wide range of features. You can add your favorite background music to your videos and change your ordinary video. Moreover, features like trimming, cutting, adjusting audio are also available.

Wondershare Filmora also offers professional editing features such as its Audio Equalizer EQ, Audio Mixer, and also Audio Denoise feature. An exciting thing about Filmora audio editor is its Detach Audio feature. With this, you can Detach Audio from a video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Another handy feature that you get from Filmora is Audio Splitter. With this, users can split audio files and extract the part that they like while deleting the other part. If you want to learn about splitting audio files on Windows and Mac with Filmora, then follow the steps below.

Step 1: Creating Project

To split audio files, you firstly need to open Wondershare Filmora on your respective device. Then, you need to create a new project so that you can get started. The next step demands you to import the audio file to Filmora.

Step 2: Importing Audio File

This could be done by moving to the ‘File’ tab from the top panel. A menu will appear on the screen from which you should select ‘Import Files.’ Then a popup menu will show up, simply hit the ‘Import Media Files’ option.

Step 3: Drag onto Timeline

You can locate the file from your respective device and import it to Filmora. Once the file has been imported successfully, you now have to drag and drop it onto the timeline to start splitting it.

Step 4: Split Audio

Now comes the fun part. Once the audio file is on the timeline, you will see a play head. You need to drag the play head to the point where you want to split the audio. You will see a scissor option after dragging the play head; hit that to split audio into two parts.

Step 5: Edit the Separated Audio

You can delete the audio that you don’t want by selecting it and pressing the ‘Delete’ button on the keyboard. In comparison, you can edit the other part of the audio. For this, double click on the audio in the timeline to open Audio Editing Window.

Step 6: Exporting File

Once you have edited the file and are satisfied, it is ready to be exported. For this, hit the ‘Export’ button, select the output format and save it on your device.

Split Audio after Detaching from Video

As we have mentioned, sometimes you like a sound, but it is part of a video. Do you know a way to get that audio from a video? Well, yes, with Filmora, you can get your favorite audio even from videos and then split it.

This could be done by using its ‘Detach Audio from Video’ feature. What this feature does is that it separates the audio from video and displays both the files separately on the timeline. You can delete the video file by selecting it and pressing ‘Delete.’ Whereas, by following the above-mentioned steps, you can then split the audio easily with the Filmora MP3 splitter.

Final Words

To learn about splitting audio, nothing is better than this article. We have discussed in detail about MP3 splitter online. Also, we talked about Wondershare Filmora audio splitter, the best option for all Windows and Mac users.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 How to Split Audio/MP3 File Online?

Part 1. How to Split Audio Files on Windows and Mac?

Whenever you think about audio editing, Wondershare Filmora is associated with that as the best software. The audio editor is perfect and compatible with both Windows and Mac. Wondershare Filmora never ceases to impress its users with its stunning features.

The audio editor Filmora offers a wide range of features. You can add your favorite background music to your videos and change your ordinary video. Moreover, features like trimming, cutting, adjusting audio are also available.

Wondershare Filmora also offers professional editing features such as its Audio Equalizer EQ, Audio Mixer, and also Audio Denoise feature. An exciting thing about Filmora audio editor is its Detach Audio feature. With this, you can Detach Audio from a video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Another handy feature that you get from Filmora is Audio Splitter. With this, users can split audio files and extract the part that they like while deleting the other part. If you want to learn about splitting audio files on Windows and Mac with Filmora, then follow the steps below.

Step 1: Creating Project

To split audio files, you firstly need to open Wondershare Filmora on your respective device. Then, you need to create a new project so that you can get started. The next step demands you to import the audio file to Filmora.

Step 2: Importing Audio File

This could be done by moving to the ‘File’ tab from the top panel. A menu will appear on the screen from which you should select ‘Import Files.’ Then a popup menu will show up, simply hit the ‘Import Media Files’ option.

Step 3: Drag onto Timeline

You can locate the file from your respective device and import it to Filmora. Once the file has been imported successfully, you now have to drag and drop it onto the timeline to start splitting it.

Step 4: Split Audio

Now comes the fun part. Once the audio file is on the timeline, you will see a play head. You need to drag the play head to the point where you want to split the audio. You will see a scissor option after dragging the play head; hit that to split audio into two parts.

Step 5: Edit the Separated Audio

You can delete the audio that you don’t want by selecting it and pressing the ‘Delete’ button on the keyboard. In comparison, you can edit the other part of the audio. For this, double click on the audio in the timeline to open Audio Editing Window.

Step 6: Exporting File

Once you have edited the file and are satisfied, it is ready to be exported. For this, hit the ‘Export’ button, select the output format and save it on your device.

Split Audio after Detaching from Video

As we have mentioned, sometimes you like a sound, but it is part of a video. Do you know a way to get that audio from a video? Well, yes, with Filmora, you can get your favorite audio even from videos and then split it.

This could be done by using its ‘Detach Audio from Video’ feature. What this feature does is that it separates the audio from video and displays both the files separately on the timeline. You can delete the video file by selecting it and pressing ‘Delete.’ Whereas, by following the above-mentioned steps, you can then split the audio easily with the Filmora MP3 splitter.

Final Words

To learn about splitting audio, nothing is better than this article. We have discussed in detail about MP3 splitter online. Also, we talked about Wondershare Filmora audio splitter, the best option for all Windows and Mac users.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 How to Split Audio/MP3 File Online?

Part 1. How to Split Audio Files on Windows and Mac?

Whenever you think about audio editing, Wondershare Filmora is associated with that as the best software. The audio editor is perfect and compatible with both Windows and Mac. Wondershare Filmora never ceases to impress its users with its stunning features.

The audio editor Filmora offers a wide range of features. You can add your favorite background music to your videos and change your ordinary video. Moreover, features like trimming, cutting, adjusting audio are also available.

Wondershare Filmora also offers professional editing features such as its Audio Equalizer EQ, Audio Mixer, and also Audio Denoise feature. An exciting thing about Filmora audio editor is its Detach Audio feature. With this, you can Detach Audio from a video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Another handy feature that you get from Filmora is Audio Splitter. With this, users can split audio files and extract the part that they like while deleting the other part. If you want to learn about splitting audio files on Windows and Mac with Filmora, then follow the steps below.

Step 1: Creating Project

To split audio files, you firstly need to open Wondershare Filmora on your respective device. Then, you need to create a new project so that you can get started. The next step demands you to import the audio file to Filmora.

Step 2: Importing Audio File

This could be done by moving to the ‘File’ tab from the top panel. A menu will appear on the screen from which you should select ‘Import Files.’ Then a popup menu will show up, simply hit the ‘Import Media Files’ option.

Step 3: Drag onto Timeline

You can locate the file from your respective device and import it to Filmora. Once the file has been imported successfully, you now have to drag and drop it onto the timeline to start splitting it.

Step 4: Split Audio

Now comes the fun part. Once the audio file is on the timeline, you will see a play head. You need to drag the play head to the point where you want to split the audio. You will see a scissor option after dragging the play head; hit that to split audio into two parts.

Step 5: Edit the Separated Audio

You can delete the audio that you don’t want by selecting it and pressing the ‘Delete’ button on the keyboard. In comparison, you can edit the other part of the audio. For this, double click on the audio in the timeline to open Audio Editing Window.

Step 6: Exporting File

Once you have edited the file and are satisfied, it is ready to be exported. For this, hit the ‘Export’ button, select the output format and save it on your device.

Split Audio after Detaching from Video

As we have mentioned, sometimes you like a sound, but it is part of a video. Do you know a way to get that audio from a video? Well, yes, with Filmora, you can get your favorite audio even from videos and then split it.

This could be done by using its ‘Detach Audio from Video’ feature. What this feature does is that it separates the audio from video and displays both the files separately on the timeline. You can delete the video file by selecting it and pressing ‘Delete.’ Whereas, by following the above-mentioned steps, you can then split the audio easily with the Filmora MP3 splitter.

Final Words

To learn about splitting audio, nothing is better than this article. We have discussed in detail about MP3 splitter online. Also, we talked about Wondershare Filmora audio splitter, the best option for all Windows and Mac users.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 How to Split Audio/MP3 File Online?

Part 1. How to Split Audio Files on Windows and Mac?

Whenever you think about audio editing, Wondershare Filmora is associated with that as the best software. The audio editor is perfect and compatible with both Windows and Mac. Wondershare Filmora never ceases to impress its users with its stunning features.

The audio editor Filmora offers a wide range of features. You can add your favorite background music to your videos and change your ordinary video. Moreover, features like trimming, cutting, adjusting audio are also available.

Wondershare Filmora also offers professional editing features such as its Audio Equalizer EQ, Audio Mixer, and also Audio Denoise feature. An exciting thing about Filmora audio editor is its Detach Audio feature. With this, you can Detach Audio from a video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Another handy feature that you get from Filmora is Audio Splitter. With this, users can split audio files and extract the part that they like while deleting the other part. If you want to learn about splitting audio files on Windows and Mac with Filmora, then follow the steps below.

Step 1: Creating Project

To split audio files, you firstly need to open Wondershare Filmora on your respective device. Then, you need to create a new project so that you can get started. The next step demands you to import the audio file to Filmora.

Step 2: Importing Audio File

This could be done by moving to the ‘File’ tab from the top panel. A menu will appear on the screen from which you should select ‘Import Files.’ Then a popup menu will show up, simply hit the ‘Import Media Files’ option.

Step 3: Drag onto Timeline

You can locate the file from your respective device and import it to Filmora. Once the file has been imported successfully, you now have to drag and drop it onto the timeline to start splitting it.

Step 4: Split Audio

Now comes the fun part. Once the audio file is on the timeline, you will see a play head. You need to drag the play head to the point where you want to split the audio. You will see a scissor option after dragging the play head; hit that to split audio into two parts.

Step 5: Edit the Separated Audio

You can delete the audio that you don’t want by selecting it and pressing the ‘Delete’ button on the keyboard. In comparison, you can edit the other part of the audio. For this, double click on the audio in the timeline to open Audio Editing Window.

Step 6: Exporting File

Once you have edited the file and are satisfied, it is ready to be exported. For this, hit the ‘Export’ button, select the output format and save it on your device.

Split Audio after Detaching from Video

As we have mentioned, sometimes you like a sound, but it is part of a video. Do you know a way to get that audio from a video? Well, yes, with Filmora, you can get your favorite audio even from videos and then split it.

This could be done by using its ‘Detach Audio from Video’ feature. What this feature does is that it separates the audio from video and displays both the files separately on the timeline. You can delete the video file by selecting it and pressing ‘Delete.’ Whereas, by following the above-mentioned steps, you can then split the audio easily with the Filmora MP3 splitter.

Final Words

To learn about splitting audio, nothing is better than this article. We have discussed in detail about MP3 splitter online. Also, we talked about Wondershare Filmora audio splitter, the best option for all Windows and Mac users.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Also read: