Audiophile’s Handbook: Advanced iMovie Audio Editing Mastery

All You Need to Know About iMovie Audio Editing

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Balancing Act: Techniques for Achieving Even Loudness in DaVinci Resolve

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Infusing Audio Into Visual Art: Step-by-Step Processes to Achieve Flawless Results

Almost everyone shoots videos and photos now. But sometimes, it’s hard to record videos while boring to capture images. What if a hybrid mingles still images with an audio file? You can add audio to photo easily.

Images with a soundtrack are simpler to create and more interactive than video; they naturally improve the project without time commitment or complexity. The question that appears is; how to add audio to a photo/image and create great multimedia photography?

In this post, we will describe and clear all your queries on how to add audio to photo. Whether you wish to combine audio and image on the computer or add audio to iPhone pictures, you can all find the answer.

In this article

01 [Can I add audio to the photo?](#Part 1)

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

Also read: