Mastering Silence: Techniques for Eliminating Sibilance in Recordings

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

E-MP3 Modifier and Integrator Program

Online Audio & Mp3 Cutter, Audio Trimmer is a simple online tool which lets you trim your audio files on the fly. Choose your file and click Upload to get started! Uploaded files are stored in a temporary folder and automatically removed from the server within two hours.

It always makes me exciting that we can cut MP3 files and merge several parts into one file using those mp3 cutter and joiner software. For example, nowadays most people use MP3 cutter software to cut the best part of a song as their ringtones or cut the best part of many different songs and merge them into one song. And here’s a list of best free 8 mp3 cutter and joiner software recommend for you. These let you cut pieces of audio from audio files easily. These free software offer various features, like cutting MP3 audio files, fade in and fade out, choosing start point and end point, create ringtones for mobile phones from audio files, create various sound clips for presentations, making of audio books, making of jokes etc

Filmora Audio Recorder

Record computer system audio

Capture microphone audio

Customize recording volume

Record screen and webcam as well

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Mastering Premiere Pro: Simplified Guide to Managing Audio Layers

How to Easily Use Audio Track Mixer in Premiere Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

If you are the type of person who loves mixing audio, then you’ll need to use this little-known function in Adobe Premiere Pro. While you might know about the Audio Clip Mixer, which lets you take on the audio between clips, the Audio Track Mixer allows you to control a whole track, which can be beneficial in its own way. Sometimes you need to make big sweeping changes that affect everything, and no one wants to change their all sounds clip by clip, which is where the track mixer comes in handy.

So how do you use the audio track mixer to manage your audio inside of a video? Well keep reading and we’ll show you!

• Part 1: How Does the Audio Track Mixer Work
• Part 2: How to Change the Audio Track Mixer Settings
• Part 3: Using Audio Track Mixer for Your next Project

Part 1: How Does the Audio Track Mixer Work

Mixing tracks is when audio is blended and mixed together in a sequence, and you have multiple sounds over one channel. For instance, when you watch a TV show and have music cut over two characters talking, that’s an example of mixed tracks. You can mix music, dialogue, sound effects, voiceovers, and other things to create a seamless finished product. You can even have different types of audio, or have different tracks play in different earphones of the headset if you want to.

With audio track mixer, you can see each track being played in real time, not just on the timeline but also on its own screen. Then you can do a few things to each track such as:

• listen to tracks separately or together
• rename them
• control the volume and type of audio that each track is producing

You can even look at meters while the main window is closed, which is helpful if you need to free up some space or organize your sounds while other data is shown.

You can see the sequence in real time as it is being played, see the peaks and valleys of the sound, and ensure that you can control the volume for every track. You’ll have total control over the sound, and the playback.

Part 2: How to Change the Audio Track Mixer Settings

If you are the type of person that likes to work with the sound as it happens, then you can. Recording and mixing on the fly is easy if you can avoid some mistakes .

Using mono tracks allows you to alter the sound for left and right settings, while stereo tracks produce two different signals for two different speakers. So, if you want to control where the sounds are coming from, then you can do so with a simple adjustment.

The audio files are edited both in the audio interface and in a timeline, where it is either imported or directly recorded. Then their waveforms can be viewed, the volume and sounds can be adjusted, and larger audio mixes can be divided into sub-mixes .

All your changes will happen on the timeline, and you’ll be able to listen to the new track instantly.

Part 3: Using Audio Track Mixer for Your next Project

If you are an aspiring filmmaker, working on a project, or just putting some clips and music together for fun, you need to use Audio Track Mixer to gain control over your sounds. Dealing with tracks, especially when you have several of them running on top of one another, can be a frustrating process of clicking and straining your ears to ensure that everything is just perfect.

Instead of wasting hours staring at the computer screen, using the Audio Track Mixer in Premiere Pro is a great way to cut down on the micromanagement and instead focus on what’s really important - getting a good quality sound out of your video and audio.

Use the track mixer to manage and customize your sounds, see the volume and base of each individual track in real time, and set when tracks come in and fade out. Using the mixer will allow you to have picture perfect sound quality, every single time.

Conclusion

If you want to edit audio in an easier way, here we recommend using Filmora . It is a video editor designed for people who want to enter a higher level of video editing. You can use FilmoraPro to do automatic audio sync. Equalize the highs and lows of your audio to normalize the volume of your clips and Reduce unwanted background sounds, like crowds or wind with this feature. It is a powerful audio editor for you. Download it now to have a try!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

If you are the type of person who loves mixing audio, then you’ll need to use this little-known function in Adobe Premiere Pro. While you might know about the Audio Clip Mixer, which lets you take on the audio between clips, the Audio Track Mixer allows you to control a whole track, which can be beneficial in its own way. Sometimes you need to make big sweeping changes that affect everything, and no one wants to change their all sounds clip by clip, which is where the track mixer comes in handy.

So how do you use the audio track mixer to manage your audio inside of a video? Well keep reading and we’ll show you!

• Part 1: How Does the Audio Track Mixer Work
• Part 2: How to Change the Audio Track Mixer Settings
• Part 3: Using Audio Track Mixer for Your next Project

Part 1: How Does the Audio Track Mixer Work

Mixing tracks is when audio is blended and mixed together in a sequence, and you have multiple sounds over one channel. For instance, when you watch a TV show and have music cut over two characters talking, that’s an example of mixed tracks. You can mix music, dialogue, sound effects, voiceovers, and other things to create a seamless finished product. You can even have different types of audio, or have different tracks play in different earphones of the headset if you want to.

With audio track mixer, you can see each track being played in real time, not just on the timeline but also on its own screen. Then you can do a few things to each track such as:

• listen to tracks separately or together
• rename them
• control the volume and type of audio that each track is producing

You can even look at meters while the main window is closed, which is helpful if you need to free up some space or organize your sounds while other data is shown.

You can see the sequence in real time as it is being played, see the peaks and valleys of the sound, and ensure that you can control the volume for every track. You’ll have total control over the sound, and the playback.

Part 2: How to Change the Audio Track Mixer Settings

If you are the type of person that likes to work with the sound as it happens, then you can. Recording and mixing on the fly is easy if you can avoid some mistakes .

Using mono tracks allows you to alter the sound for left and right settings, while stereo tracks produce two different signals for two different speakers. So, if you want to control where the sounds are coming from, then you can do so with a simple adjustment.

The audio files are edited both in the audio interface and in a timeline, where it is either imported or directly recorded. Then their waveforms can be viewed, the volume and sounds can be adjusted, and larger audio mixes can be divided into sub-mixes .

All your changes will happen on the timeline, and you’ll be able to listen to the new track instantly.

Part 3: Using Audio Track Mixer for Your next Project

If you are an aspiring filmmaker, working on a project, or just putting some clips and music together for fun, you need to use Audio Track Mixer to gain control over your sounds. Dealing with tracks, especially when you have several of them running on top of one another, can be a frustrating process of clicking and straining your ears to ensure that everything is just perfect.

Instead of wasting hours staring at the computer screen, using the Audio Track Mixer in Premiere Pro is a great way to cut down on the micromanagement and instead focus on what’s really important - getting a good quality sound out of your video and audio.

Use the track mixer to manage and customize your sounds, see the volume and base of each individual track in real time, and set when tracks come in and fade out. Using the mixer will allow you to have picture perfect sound quality, every single time.

Conclusion

If you want to edit audio in an easier way, here we recommend using Filmora . It is a video editor designed for people who want to enter a higher level of video editing. You can use FilmoraPro to do automatic audio sync. Equalize the highs and lows of your audio to normalize the volume of your clips and Reduce unwanted background sounds, like crowds or wind with this feature. It is a powerful audio editor for you. Download it now to have a try!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

If you are the type of person who loves mixing audio, then you’ll need to use this little-known function in Adobe Premiere Pro. While you might know about the Audio Clip Mixer, which lets you take on the audio between clips, the Audio Track Mixer allows you to control a whole track, which can be beneficial in its own way. Sometimes you need to make big sweeping changes that affect everything, and no one wants to change their all sounds clip by clip, which is where the track mixer comes in handy.

So how do you use the audio track mixer to manage your audio inside of a video? Well keep reading and we’ll show you!

• Part 1: How Does the Audio Track Mixer Work
• Part 2: How to Change the Audio Track Mixer Settings
• Part 3: Using Audio Track Mixer for Your next Project

Part 1: How Does the Audio Track Mixer Work

Mixing tracks is when audio is blended and mixed together in a sequence, and you have multiple sounds over one channel. For instance, when you watch a TV show and have music cut over two characters talking, that’s an example of mixed tracks. You can mix music, dialogue, sound effects, voiceovers, and other things to create a seamless finished product. You can even have different types of audio, or have different tracks play in different earphones of the headset if you want to.

With audio track mixer, you can see each track being played in real time, not just on the timeline but also on its own screen. Then you can do a few things to each track such as:

• listen to tracks separately or together
• rename them
• control the volume and type of audio that each track is producing

You can even look at meters while the main window is closed, which is helpful if you need to free up some space or organize your sounds while other data is shown.

You can see the sequence in real time as it is being played, see the peaks and valleys of the sound, and ensure that you can control the volume for every track. You’ll have total control over the sound, and the playback.

Part 2: How to Change the Audio Track Mixer Settings

If you are the type of person that likes to work with the sound as it happens, then you can. Recording and mixing on the fly is easy if you can avoid some mistakes .

Using mono tracks allows you to alter the sound for left and right settings, while stereo tracks produce two different signals for two different speakers. So, if you want to control where the sounds are coming from, then you can do so with a simple adjustment.

The audio files are edited both in the audio interface and in a timeline, where it is either imported or directly recorded. Then their waveforms can be viewed, the volume and sounds can be adjusted, and larger audio mixes can be divided into sub-mixes .

All your changes will happen on the timeline, and you’ll be able to listen to the new track instantly.

Part 3: Using Audio Track Mixer for Your next Project

If you are an aspiring filmmaker, working on a project, or just putting some clips and music together for fun, you need to use Audio Track Mixer to gain control over your sounds. Dealing with tracks, especially when you have several of them running on top of one another, can be a frustrating process of clicking and straining your ears to ensure that everything is just perfect.

Instead of wasting hours staring at the computer screen, using the Audio Track Mixer in Premiere Pro is a great way to cut down on the micromanagement and instead focus on what’s really important - getting a good quality sound out of your video and audio.

Use the track mixer to manage and customize your sounds, see the volume and base of each individual track in real time, and set when tracks come in and fade out. Using the mixer will allow you to have picture perfect sound quality, every single time.

Conclusion

If you want to edit audio in an easier way, here we recommend using Filmora . It is a video editor designed for people who want to enter a higher level of video editing. You can use FilmoraPro to do automatic audio sync. Equalize the highs and lows of your audio to normalize the volume of your clips and Reduce unwanted background sounds, like crowds or wind with this feature. It is a powerful audio editor for you. Download it now to have a try!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

If you are the type of person who loves mixing audio, then you’ll need to use this little-known function in Adobe Premiere Pro. While you might know about the Audio Clip Mixer, which lets you take on the audio between clips, the Audio Track Mixer allows you to control a whole track, which can be beneficial in its own way. Sometimes you need to make big sweeping changes that affect everything, and no one wants to change their all sounds clip by clip, which is where the track mixer comes in handy.

So how do you use the audio track mixer to manage your audio inside of a video? Well keep reading and we’ll show you!

• Part 1: How Does the Audio Track Mixer Work
• Part 2: How to Change the Audio Track Mixer Settings
• Part 3: Using Audio Track Mixer for Your next Project

Part 1: How Does the Audio Track Mixer Work

Mixing tracks is when audio is blended and mixed together in a sequence, and you have multiple sounds over one channel. For instance, when you watch a TV show and have music cut over two characters talking, that’s an example of mixed tracks. You can mix music, dialogue, sound effects, voiceovers, and other things to create a seamless finished product. You can even have different types of audio, or have different tracks play in different earphones of the headset if you want to.

With audio track mixer, you can see each track being played in real time, not just on the timeline but also on its own screen. Then you can do a few things to each track such as:

• listen to tracks separately or together
• rename them
• control the volume and type of audio that each track is producing

You can even look at meters while the main window is closed, which is helpful if you need to free up some space or organize your sounds while other data is shown.

You can see the sequence in real time as it is being played, see the peaks and valleys of the sound, and ensure that you can control the volume for every track. You’ll have total control over the sound, and the playback.

Part 2: How to Change the Audio Track Mixer Settings

If you are the type of person that likes to work with the sound as it happens, then you can. Recording and mixing on the fly is easy if you can avoid some mistakes .

Using mono tracks allows you to alter the sound for left and right settings, while stereo tracks produce two different signals for two different speakers. So, if you want to control where the sounds are coming from, then you can do so with a simple adjustment.

The audio files are edited both in the audio interface and in a timeline, where it is either imported or directly recorded. Then their waveforms can be viewed, the volume and sounds can be adjusted, and larger audio mixes can be divided into sub-mixes .

All your changes will happen on the timeline, and you’ll be able to listen to the new track instantly.

Part 3: Using Audio Track Mixer for Your next Project

If you are an aspiring filmmaker, working on a project, or just putting some clips and music together for fun, you need to use Audio Track Mixer to gain control over your sounds. Dealing with tracks, especially when you have several of them running on top of one another, can be a frustrating process of clicking and straining your ears to ensure that everything is just perfect.

Instead of wasting hours staring at the computer screen, using the Audio Track Mixer in Premiere Pro is a great way to cut down on the micromanagement and instead focus on what’s really important - getting a good quality sound out of your video and audio.

Use the track mixer to manage and customize your sounds, see the volume and base of each individual track in real time, and set when tracks come in and fade out. Using the mixer will allow you to have picture perfect sound quality, every single time.

Conclusion

If you want to edit audio in an easier way, here we recommend using Filmora . It is a video editor designed for people who want to enter a higher level of video editing. You can use FilmoraPro to do automatic audio sync. Equalize the highs and lows of your audio to normalize the volume of your clips and Reduce unwanted background sounds, like crowds or wind with this feature. It is a powerful audio editor for you. Download it now to have a try!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: