![Updated Unlock Your Music at No Extra Cost with These 5 Volume Normalizers](https://www.lifewire.com/thmb/kaKmEcJ4wgeshIkJ4JE3bp3u-NU=/400x300/filters:no_upscale():max_bytes(150000):strip_icc():format(webp)/GettyImages-1369568023-c596ac8d6b5a4f3682bda2fa0feb12bd.jpg)
Updated Unlock Your Music at No Extra Cost with These 5 Volume Normalizers
![](/images/site-logo.png)
Unlock Your Music at No Extra Cost with These 5 Volume Normalizers
When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!
So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.
With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.
Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.
As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.
With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!
So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.
Wondershare Filmora X
Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
After you have clicked on it, wait until the normalization completes.
Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!
Adobe Premiere Pro
Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.
To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.
Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.
(If you can not see your audio meters, just go to Window menu and choose Audio Meters).
So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.
So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:
Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!
VLC Media Player
VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.
But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:
You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.
What VLC does is just let adjust the general volume, leaving the specifics out of our control.
If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:
Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.
In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.
Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.
Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.
MP3Gain
MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.
So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…
Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.
Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.
The software will show you the volume of each of the file, and then you will need to just click on Track Gain.
Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!
Movavi
Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!
Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.
If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.
To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.
So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!
Free Download For macOS 10.14 or later
When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
After you have clicked on it, wait until the normalization completes.
Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!
Adobe Premiere Pro
Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.
To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.
Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.
(If you can not see your audio meters, just go to Window menu and choose Audio Meters).
So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.
So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:
Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!
VLC Media Player
VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.
But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:
You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.
What VLC does is just let adjust the general volume, leaving the specifics out of our control.
If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:
Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.
In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.
Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.
Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.
MP3Gain
MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.
So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…
Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.
Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.
The software will show you the volume of each of the file, and then you will need to just click on Track Gain.
Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!
Movavi
Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!
Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.
If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.
To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.
So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!
The Essential Guide to Equalizing Audio Volumes in VLC Media Player
How To Normalize Volume in VLC
How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.
But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.
When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.
In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.
So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.
Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.
So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.
As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:
First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.
This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.
But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:
First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.
Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.
Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.
Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.
Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!
How to normalize audio in Wondershare Filmora?
Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
After you have clicked on it, wait until the normalization completes.
Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!
So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!
Free Download For macOS 10.14 or later
When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
After you have clicked on it, wait until the normalization completes.
Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!
So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!
“Affordable MP3 Converter Mac Edition”
It’s really difficult to find a good MP3 editor, and it’s even harder to find a free yet great MP3 editor Mac. Looking for something good and specific is very time-consuming. Let’s guide you on what a good MP3 editor must have. Most importantly, the first thing someone interacts with is its interface. People prefer those MP3 editors that have an uncluttered interface.
Moving on, multi-track editing is an essential requirement. For complex edits, you cannot open multiple tabs of the editor. Instead, working on multiple tracks sounds better. Moreover, a great MP3 editor must support a wide range of file formats. If you want to know about cheap and free editors, then let’s begin talking about MP3 editor Mac.
In this article
01 Top 1 Recommended MP3 Editor for Mac-Wondershare Filmora
02 3 Free and Cheap MP3 Editor for Mac
Part 1. Top 1 Recommended MP3 Editor for Mac-Wondershare Filmora
If we talk about a great MP3 editor that supports various file formats and has a clean and straightforward interface with multi-track editing ability, then nothing is better than Wondershare Filmora . If you are a Mac user, then for you, Filmora is the top-recommended MP3 editor Mac.
Importantly, learning the editor and using it never challenges anyone. Its simple interface is understandable and easy to work with that even beginners can use it. The MP3 editor offers a variety of features that amaze its users.
With Filmora MP3 editor, you can easily add background music to your video files. The editor can change your media files drastically with features like Volume Adjustment, Split Audio, and Adjust Audio. Wondershare Filmora also offers Audio Equalizer, Audio Denoise feature.
For Win 7 or later (64-bit)
For macOS 10.12 or later
You can learn more about the MP3 editor by exploring it, but who will guide you about its working? Well, let us do the honors. We are about to share a step-by-step guideline. With this guideline, you will learn how to use Filmora, the MP3 editor Mac.
Step 1: Project Creation
First of all, start by opening Filmora. Then, you should create a ‘New Project.’ Once that is done, it’s time to import the MP3 audio file that you plan to edit.
Step 2: Importing MP3 File
For importing the file, click on the ‘File’ option from the top panel. There, move the cursor to the ‘Import Media’ option. A sub-menu will pop up on the screen; select ‘Import Media Files’ option from that sub-menu.
Step 3: Open Audio Editing Panel
After the file has been imported, you need it on the timeline. For this, simply drag and drop the MP3 audio file onto the timeline. Now comes the fun part that is editing for editing the file, double-click on it to open the audio editing panel.
Step 4: Increase Speed or Split Audio
As we have mentioned earlier, Filmora offers a variety of audio editing features, so now you can play with them. You can also adjust the Speed of the Audio or Split Audio with Filmora.
Step 5: Exporting MP3 File
Once you have edited the audio file and you are completely satisfied, then it’s time to export it. For that, you need to hit the ‘Export’ button. This will open a new window. From that window, head to the ‘Local’ tab and set the output format as ‘MP3’. You can now save and export the MP3 file.
Part 2. 3 Free and Cheap MP3 Editor for Mac
Do you know any good yet cheat MP3 editors for Mac? Although the market has a lot of MP3 editors, it’s hard to find a good one. For this reason, we are here to help and guide you. The following section of this article will talk about 3 free and cheap MP3 editors, Mac. Let’s get started!
1. Audacity
This MP3 editor Mac is reliable for both the users of Mac as well as for Windows. Audacity allows you the usage of sequential undo or redo options. This option allows you to go back and forth to any step in the MP3 audio editing session. Along with that, cut, copy, paste and delete options are also available.
Audacity provides an ‘Envelop tool’. It allows the user to fade the volume up or volume down smoothly. It is free, open-source audio MP3 editing software for all levels of experience. It has a straightforward interface with all the essential tools that can come under use while editing. You can pin the problems and edit them accordingly.
Key Features
- A spectrogram is available for frequency analysis. This makes it usable for high-quality 32-bit audio and, importantly, makes it the best free MP3 audio editor.
- It provides various options for input file formats, including MP3, WAV, and others. Along with recording in the software, you can edit audio files as well.
- Audacity provides Sync-Lock Track technology. It enables you to keep track of the labels and keep them synchronized.
2. WavePad
Are you ready to learn about WavePad? The MP3 audio editor is free for Mac users. It has a fine interface that can be used easily. WavePad allows the user to record new files in the app alongside editing the existing files. It enables you to process the MP3 audio files in batch, which means that up to a thousand files can be edited at once.
It provides a multi-track MP3 audio mixer that is famous among its users. WavePad can scrub, search and bookmark audio so that the users can easily edit the files. It also has tools like speech syntheses which is a text-to-speech feature. Another fantastic feature that is offered is Voice Changer.
Key Features
- It has a multi-window interface that makes it unique to the user. Along with that, noise reduction and pop removal features are also available.
- WavePad supports all kinds of audio and music formats. These formats include MP3 and others like FLAC, OGG, real audio, GSM.
- It allows the audio after-effects like an amplifier, normalizer and equalizer, reverb and echo, and much more.
3. Apple GarageBand
Apple GarageBand is the built-in MP3 audio editor of the MacBook with an innovative and modern design that is easy to learn and implement. GarageBand is Apple audio creation studio with built-in audio optimization features. It has a sound library of its own that is easily accessible to the user. Moreover, users can self-record the audio if needed through built-in options.
Apple GarageBand allows users to mix audio up to 255 different tracks. Users can add built-in drummer, pianist, or beat producers that help you in the production of sound.
Key Features
- With Apple GarageBand, users can choose between the 33 popular genres. Options like EDM, rock, jazz, hip hop, and others exist.
- iCloud can be used for the storage of tracks. It can also be used to play the sound made on any Apple device like iPhone and iPad.
- Custom guitar rigs can be made with the help of 25 built-in legendary amps and cabinets. Custom Pedalboard can be made with the help of a Stompbox that is fun.
Final Thoughts
The article above is all about sharing the information regarding the best yet cheap MP3 editors Mac. We talked about the top-recommended MP3 editor, that is Wondershare Filmora. Moreover, we shared 3 great MP3 editors that can also be used.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More >
02 3 Free and Cheap MP3 Editor for Mac
Part 1. Top 1 Recommended MP3 Editor for Mac-Wondershare Filmora
If we talk about a great MP3 editor that supports various file formats and has a clean and straightforward interface with multi-track editing ability, then nothing is better than Wondershare Filmora . If you are a Mac user, then for you, Filmora is the top-recommended MP3 editor Mac.
Importantly, learning the editor and using it never challenges anyone. Its simple interface is understandable and easy to work with that even beginners can use it. The MP3 editor offers a variety of features that amaze its users.
With Filmora MP3 editor, you can easily add background music to your video files. The editor can change your media files drastically with features like Volume Adjustment, Split Audio, and Adjust Audio. Wondershare Filmora also offers Audio Equalizer, Audio Denoise feature.
For Win 7 or later (64-bit)
For macOS 10.12 or later
You can learn more about the MP3 editor by exploring it, but who will guide you about its working? Well, let us do the honors. We are about to share a step-by-step guideline. With this guideline, you will learn how to use Filmora, the MP3 editor Mac.
Step 1: Project Creation
First of all, start by opening Filmora. Then, you should create a ‘New Project.’ Once that is done, it’s time to import the MP3 audio file that you plan to edit.
Step 2: Importing MP3 File
For importing the file, click on the ‘File’ option from the top panel. There, move the cursor to the ‘Import Media’ option. A sub-menu will pop up on the screen; select ‘Import Media Files’ option from that sub-menu.
Step 3: Open Audio Editing Panel
After the file has been imported, you need it on the timeline. For this, simply drag and drop the MP3 audio file onto the timeline. Now comes the fun part that is editing for editing the file, double-click on it to open the audio editing panel.
Step 4: Increase Speed or Split Audio
As we have mentioned earlier, Filmora offers a variety of audio editing features, so now you can play with them. You can also adjust the Speed of the Audio or Split Audio with Filmora.
Step 5: Exporting MP3 File
Once you have edited the audio file and you are completely satisfied, then it’s time to export it. For that, you need to hit the ‘Export’ button. This will open a new window. From that window, head to the ‘Local’ tab and set the output format as ‘MP3’. You can now save and export the MP3 file.
Part 2. 3 Free and Cheap MP3 Editor for Mac
Do you know any good yet cheat MP3 editors for Mac? Although the market has a lot of MP3 editors, it’s hard to find a good one. For this reason, we are here to help and guide you. The following section of this article will talk about 3 free and cheap MP3 editors, Mac. Let’s get started!
1. Audacity
This MP3 editor Mac is reliable for both the users of Mac as well as for Windows. Audacity allows you the usage of sequential undo or redo options. This option allows you to go back and forth to any step in the MP3 audio editing session. Along with that, cut, copy, paste and delete options are also available.
Audacity provides an ‘Envelop tool’. It allows the user to fade the volume up or volume down smoothly. It is free, open-source audio MP3 editing software for all levels of experience. It has a straightforward interface with all the essential tools that can come under use while editing. You can pin the problems and edit them accordingly.
Key Features
- A spectrogram is available for frequency analysis. This makes it usable for high-quality 32-bit audio and, importantly, makes it the best free MP3 audio editor.
- It provides various options for input file formats, including MP3, WAV, and others. Along with recording in the software, you can edit audio files as well.
- Audacity provides Sync-Lock Track technology. It enables you to keep track of the labels and keep them synchronized.
2. WavePad
Are you ready to learn about WavePad? The MP3 audio editor is free for Mac users. It has a fine interface that can be used easily. WavePad allows the user to record new files in the app alongside editing the existing files. It enables you to process the MP3 audio files in batch, which means that up to a thousand files can be edited at once.
It provides a multi-track MP3 audio mixer that is famous among its users. WavePad can scrub, search and bookmark audio so that the users can easily edit the files. It also has tools like speech syntheses which is a text-to-speech feature. Another fantastic feature that is offered is Voice Changer.
Key Features
- It has a multi-window interface that makes it unique to the user. Along with that, noise reduction and pop removal features are also available.
- WavePad supports all kinds of audio and music formats. These formats include MP3 and others like FLAC, OGG, real audio, GSM.
- It allows the audio after-effects like an amplifier, normalizer and equalizer, reverb and echo, and much more.
3. Apple GarageBand
Apple GarageBand is the built-in MP3 audio editor of the MacBook with an innovative and modern design that is easy to learn and implement. GarageBand is Apple audio creation studio with built-in audio optimization features. It has a sound library of its own that is easily accessible to the user. Moreover, users can self-record the audio if needed through built-in options.
Apple GarageBand allows users to mix audio up to 255 different tracks. Users can add built-in drummer, pianist, or beat producers that help you in the production of sound.
Key Features
- With Apple GarageBand, users can choose between the 33 popular genres. Options like EDM, rock, jazz, hip hop, and others exist.
- iCloud can be used for the storage of tracks. It can also be used to play the sound made on any Apple device like iPhone and iPad.
- Custom guitar rigs can be made with the help of 25 built-in legendary amps and cabinets. Custom Pedalboard can be made with the help of a Stompbox that is fun.
Final Thoughts
The article above is all about sharing the information regarding the best yet cheap MP3 editors Mac. We talked about the top-recommended MP3 editor, that is Wondershare Filmora. Moreover, we shared 3 great MP3 editors that can also be used.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More >
02 3 Free and Cheap MP3 Editor for Mac
Part 1. Top 1 Recommended MP3 Editor for Mac-Wondershare Filmora
If we talk about a great MP3 editor that supports various file formats and has a clean and straightforward interface with multi-track editing ability, then nothing is better than Wondershare Filmora . If you are a Mac user, then for you, Filmora is the top-recommended MP3 editor Mac.
Importantly, learning the editor and using it never challenges anyone. Its simple interface is understandable and easy to work with that even beginners can use it. The MP3 editor offers a variety of features that amaze its users.
With Filmora MP3 editor, you can easily add background music to your video files. The editor can change your media files drastically with features like Volume Adjustment, Split Audio, and Adjust Audio. Wondershare Filmora also offers Audio Equalizer, Audio Denoise feature.
For Win 7 or later (64-bit)
For macOS 10.12 or later
You can learn more about the MP3 editor by exploring it, but who will guide you about its working? Well, let us do the honors. We are about to share a step-by-step guideline. With this guideline, you will learn how to use Filmora, the MP3 editor Mac.
Step 1: Project Creation
First of all, start by opening Filmora. Then, you should create a ‘New Project.’ Once that is done, it’s time to import the MP3 audio file that you plan to edit.
Step 2: Importing MP3 File
For importing the file, click on the ‘File’ option from the top panel. There, move the cursor to the ‘Import Media’ option. A sub-menu will pop up on the screen; select ‘Import Media Files’ option from that sub-menu.
Step 3: Open Audio Editing Panel
After the file has been imported, you need it on the timeline. For this, simply drag and drop the MP3 audio file onto the timeline. Now comes the fun part that is editing for editing the file, double-click on it to open the audio editing panel.
Step 4: Increase Speed or Split Audio
As we have mentioned earlier, Filmora offers a variety of audio editing features, so now you can play with them. You can also adjust the Speed of the Audio or Split Audio with Filmora.
Step 5: Exporting MP3 File
Once you have edited the audio file and you are completely satisfied, then it’s time to export it. For that, you need to hit the ‘Export’ button. This will open a new window. From that window, head to the ‘Local’ tab and set the output format as ‘MP3’. You can now save and export the MP3 file.
Part 2. 3 Free and Cheap MP3 Editor for Mac
Do you know any good yet cheat MP3 editors for Mac? Although the market has a lot of MP3 editors, it’s hard to find a good one. For this reason, we are here to help and guide you. The following section of this article will talk about 3 free and cheap MP3 editors, Mac. Let’s get started!
1. Audacity
This MP3 editor Mac is reliable for both the users of Mac as well as for Windows. Audacity allows you the usage of sequential undo or redo options. This option allows you to go back and forth to any step in the MP3 audio editing session. Along with that, cut, copy, paste and delete options are also available.
Audacity provides an ‘Envelop tool’. It allows the user to fade the volume up or volume down smoothly. It is free, open-source audio MP3 editing software for all levels of experience. It has a straightforward interface with all the essential tools that can come under use while editing. You can pin the problems and edit them accordingly.
Key Features
- A spectrogram is available for frequency analysis. This makes it usable for high-quality 32-bit audio and, importantly, makes it the best free MP3 audio editor.
- It provides various options for input file formats, including MP3, WAV, and others. Along with recording in the software, you can edit audio files as well.
- Audacity provides Sync-Lock Track technology. It enables you to keep track of the labels and keep them synchronized.
2. WavePad
Are you ready to learn about WavePad? The MP3 audio editor is free for Mac users. It has a fine interface that can be used easily. WavePad allows the user to record new files in the app alongside editing the existing files. It enables you to process the MP3 audio files in batch, which means that up to a thousand files can be edited at once.
It provides a multi-track MP3 audio mixer that is famous among its users. WavePad can scrub, search and bookmark audio so that the users can easily edit the files. It also has tools like speech syntheses which is a text-to-speech feature. Another fantastic feature that is offered is Voice Changer.
Key Features
- It has a multi-window interface that makes it unique to the user. Along with that, noise reduction and pop removal features are also available.
- WavePad supports all kinds of audio and music formats. These formats include MP3 and others like FLAC, OGG, real audio, GSM.
- It allows the audio after-effects like an amplifier, normalizer and equalizer, reverb and echo, and much more.
3. Apple GarageBand
Apple GarageBand is the built-in MP3 audio editor of the MacBook with an innovative and modern design that is easy to learn and implement. GarageBand is Apple audio creation studio with built-in audio optimization features. It has a sound library of its own that is easily accessible to the user. Moreover, users can self-record the audio if needed through built-in options.
Apple GarageBand allows users to mix audio up to 255 different tracks. Users can add built-in drummer, pianist, or beat producers that help you in the production of sound.
Key Features
- With Apple GarageBand, users can choose between the 33 popular genres. Options like EDM, rock, jazz, hip hop, and others exist.
- iCloud can be used for the storage of tracks. It can also be used to play the sound made on any Apple device like iPhone and iPad.
- Custom guitar rigs can be made with the help of 25 built-in legendary amps and cabinets. Custom Pedalboard can be made with the help of a Stompbox that is fun.
Final Thoughts
The article above is all about sharing the information regarding the best yet cheap MP3 editors Mac. We talked about the top-recommended MP3 editor, that is Wondershare Filmora. Moreover, we shared 3 great MP3 editors that can also be used.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More >
02 3 Free and Cheap MP3 Editor for Mac
Part 1. Top 1 Recommended MP3 Editor for Mac-Wondershare Filmora
If we talk about a great MP3 editor that supports various file formats and has a clean and straightforward interface with multi-track editing ability, then nothing is better than Wondershare Filmora . If you are a Mac user, then for you, Filmora is the top-recommended MP3 editor Mac.
Importantly, learning the editor and using it never challenges anyone. Its simple interface is understandable and easy to work with that even beginners can use it. The MP3 editor offers a variety of features that amaze its users.
With Filmora MP3 editor, you can easily add background music to your video files. The editor can change your media files drastically with features like Volume Adjustment, Split Audio, and Adjust Audio. Wondershare Filmora also offers Audio Equalizer, Audio Denoise feature.
For Win 7 or later (64-bit)
For macOS 10.12 or later
You can learn more about the MP3 editor by exploring it, but who will guide you about its working? Well, let us do the honors. We are about to share a step-by-step guideline. With this guideline, you will learn how to use Filmora, the MP3 editor Mac.
Step 1: Project Creation
First of all, start by opening Filmora. Then, you should create a ‘New Project.’ Once that is done, it’s time to import the MP3 audio file that you plan to edit.
Step 2: Importing MP3 File
For importing the file, click on the ‘File’ option from the top panel. There, move the cursor to the ‘Import Media’ option. A sub-menu will pop up on the screen; select ‘Import Media Files’ option from that sub-menu.
Step 3: Open Audio Editing Panel
After the file has been imported, you need it on the timeline. For this, simply drag and drop the MP3 audio file onto the timeline. Now comes the fun part that is editing for editing the file, double-click on it to open the audio editing panel.
Step 4: Increase Speed or Split Audio
As we have mentioned earlier, Filmora offers a variety of audio editing features, so now you can play with them. You can also adjust the Speed of the Audio or Split Audio with Filmora.
Step 5: Exporting MP3 File
Once you have edited the audio file and you are completely satisfied, then it’s time to export it. For that, you need to hit the ‘Export’ button. This will open a new window. From that window, head to the ‘Local’ tab and set the output format as ‘MP3’. You can now save and export the MP3 file.
Part 2. 3 Free and Cheap MP3 Editor for Mac
Do you know any good yet cheat MP3 editors for Mac? Although the market has a lot of MP3 editors, it’s hard to find a good one. For this reason, we are here to help and guide you. The following section of this article will talk about 3 free and cheap MP3 editors, Mac. Let’s get started!
1. Audacity
This MP3 editor Mac is reliable for both the users of Mac as well as for Windows. Audacity allows you the usage of sequential undo or redo options. This option allows you to go back and forth to any step in the MP3 audio editing session. Along with that, cut, copy, paste and delete options are also available.
Audacity provides an ‘Envelop tool’. It allows the user to fade the volume up or volume down smoothly. It is free, open-source audio MP3 editing software for all levels of experience. It has a straightforward interface with all the essential tools that can come under use while editing. You can pin the problems and edit them accordingly.
Key Features
- A spectrogram is available for frequency analysis. This makes it usable for high-quality 32-bit audio and, importantly, makes it the best free MP3 audio editor.
- It provides various options for input file formats, including MP3, WAV, and others. Along with recording in the software, you can edit audio files as well.
- Audacity provides Sync-Lock Track technology. It enables you to keep track of the labels and keep them synchronized.
2. WavePad
Are you ready to learn about WavePad? The MP3 audio editor is free for Mac users. It has a fine interface that can be used easily. WavePad allows the user to record new files in the app alongside editing the existing files. It enables you to process the MP3 audio files in batch, which means that up to a thousand files can be edited at once.
It provides a multi-track MP3 audio mixer that is famous among its users. WavePad can scrub, search and bookmark audio so that the users can easily edit the files. It also has tools like speech syntheses which is a text-to-speech feature. Another fantastic feature that is offered is Voice Changer.
Key Features
- It has a multi-window interface that makes it unique to the user. Along with that, noise reduction and pop removal features are also available.
- WavePad supports all kinds of audio and music formats. These formats include MP3 and others like FLAC, OGG, real audio, GSM.
- It allows the audio after-effects like an amplifier, normalizer and equalizer, reverb and echo, and much more.
3. Apple GarageBand
Apple GarageBand is the built-in MP3 audio editor of the MacBook with an innovative and modern design that is easy to learn and implement. GarageBand is Apple audio creation studio with built-in audio optimization features. It has a sound library of its own that is easily accessible to the user. Moreover, users can self-record the audio if needed through built-in options.
Apple GarageBand allows users to mix audio up to 255 different tracks. Users can add built-in drummer, pianist, or beat producers that help you in the production of sound.
Key Features
- With Apple GarageBand, users can choose between the 33 popular genres. Options like EDM, rock, jazz, hip hop, and others exist.
- iCloud can be used for the storage of tracks. It can also be used to play the sound made on any Apple device like iPhone and iPad.
- Custom guitar rigs can be made with the help of 25 built-in legendary amps and cabinets. Custom Pedalboard can be made with the help of a Stompbox that is fun.
Final Thoughts
The article above is all about sharing the information regarding the best yet cheap MP3 editors Mac. We talked about the top-recommended MP3 editor, that is Wondershare Filmora. Moreover, we shared 3 great MP3 editors that can also be used.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More >
Also read:
- 2024 Approved Essential MP3 Recording Apps A List of the Top 5 Best on Todays Market
- New 2024 Approved Mastering Safe Screen Time Expert Advice on Video Call Etiquette and Protection
- New In 2024, Vital Criteria for Assessing the Best Mac-Based Audio Editors
- 2024 Approved Streamlined Conversion Discover the Leading Free Online & Offline Video-to-Audio Solutions
- New The Modern Listeners Guide to AirPod and PC Syncing (For Windows & macOS Users)
- Updated Best Song Finder Apps to Recognize Music on Android
- Discovering the Premier Voice Transformation Software for 2024
- New In 2024, Audio-Visual Coalescence Techniques for Cohesive Media Creation
- New In 2024, Intuitive Vocal Modification Mechanisms An Insight Into Operational Aspects, Standards, and Workarounds
- Audacity Mastery Enhancing Your Podcast Sound and Delivery
- New Your Ultimate Source List The Top Picks of Copyright-Friendly Comic Soundtracks Websites
- Updated In 2024, Canine Howl Amalgam Sounds & Effects Compilation
- 2024 Approved Deciphering the Unheard Advanced Audio Separation Techniques for Digital Videos
- In 2024, Lexis Audio Editor Demystified Top Reviews, Key Features, and Educational Guides
- Understanding the Advanced Features in TwistedWave for Professionals and Hobbyists Alike
- Voicing Your Ideas with Confidence A Comprehensive List of Top Voice Altering Tools for Google Meet for 2024
- Updated The Ultimate Selection of Six Compelling Chrome Talk Transformers to Experience - MovieMagicSuite
- New In 2024, Techniques for Embedding Audio Into Newly Updated AVI Video Files
- New Creating Synchronized Media Incorporating Video Into Audio Streams for 2024
- Updated 2024 Approved 10 Best Nature Sounds Apps for iOS and Android
- Unearthing the Chirp-Piece A Study on Cricket Noises
- 6 Best Free Online Audio Editor to Use (100 Free)
- Beyond Beats Exploring Social Impact and Cultural Significance in Rap
- Updated In 2024, The Hidden Gems for Free Download Guitar Visuals and Acoustic Pieces
- 2024 Approved Navigating Through Googles Audio Platform The Podcast Interface Explained
- 2024 Approved Step-by-Step An Essential Tutorial on Editing Your First Podcast
- New The Ultimate Guide to Mastering Sound Inversion Top Audio Reversers
- In 2024, Dose Life360 Notify Me When Someone Checks My Location On Nokia C110? | Dr.fone
- How to Unlock Apple ID On your iPhone 8 without Security Questions?
- Does Galaxy S23+ support MOV videos ?
- In 2024, Top 10 Best Spy Watches For your Realme C53 | Dr.fone
- Updated Windows 8 AVI Editor Fast and Reliable Video Editing Software - Updated 2023
- In 2024, Pattern Locks Are Unsafe Secure Your ZTE Phone Now with These Tips
- 5 Solutions For Sony Xperia 10 V Unlock Without Password
- How to Track WhatsApp Messages on Nokia C300 Without Them Knowing? | Dr.fone
- New In 2024, Top 9 Sparkle Effects Photo and Video Editors You Should Know
- New In 2024, Discover the Top 10 Free Green Screen Apps for Android and iOS
- 2024 Approved Best Toolbox to Translate YouTube Videos to English Subtitles
- Full Guide on Mirroring Your Honor Magic 6 Pro to Your PC/Mac | Dr.fone
- How To Fix Part of the Touch Screen Not Working on Poco X5 | Dr.fone
- How to Intercept Text Messages on Vivo V30 Pro | Dr.fone
- In 2024, Top 4 SIM Location Trackers To Easily Find Your Lost Tecno Spark Go (2023) Device
- The Easiest Methods to Hard Reset Oppo A18 | Dr.fone
- Updated Chrome Video Translators Top 5 Video Translation Chrome Extensions
- Updated Vertical Vision A Step-by-Step Guide to Smartphone Video Creation for 2024
- Top-Rated Free Video Editing Tools for MP4 Files for 2024
- In 2024, Planning to Use a Pokemon Go Joystick on Vivo Y200e 5G? | Dr.fone
- Title: Updated Unlock Your Music at No Extra Cost with These 5 Volume Normalizers
- Author: Ella
- Created at : 2024-05-19 06:26:41
- Updated at : 2024-05-20 06:26:41
- Link: https://sound-optimizing.techidaily.com/updated-unlock-your-music-at-no-extra-cost-with-these-5-volume-normalizers/
- License: This work is licensed under CC BY-NC-SA 4.0.